cm used for sale

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST WE CAN DO IT WITH ADDITIONAL OFFER

Used Revised Air Compressor CMC CWA11-800 40 bar General Features of the Used Air Compressor CMC CWA11-800 40 bar The Used Air Compressor CMC CWA11-800 40 bar delivers high performance as an oil-free, three-stage unit, ideal for industrial environments that require high-quality compressed air. CMC manufactured this model in 2010 for air compression systems operating at up to 40 bar of working pressure. Since the unit uses dry-running cylinders, it eliminates the need for internal lubrication. Therefore, operators can use it in critical applications where they must avoid any air contamination. Moreover, its robust design ensures long-term durability and operational consistency. Technical Operating Specifications The Used Air Compressor CMC CWA11-800 40 bar operates with three cylinders across two compression stages. It draws air at atmospheric pressure and functions in ambient temperature ...

CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...

CMZ TTL-66-66-T1Y-T2Y+GL20II CNC Lathe GENERAL Project No.: 905769 Quantity: 1 pcs. Manufacturer: CMZ Type: TTL-66-66-T1Y-T2Y+GL20II Control: Fanuc 31i B Year of Make: 2021 Condition: Used machine Approx (hrs): 9050 DESCRIPTION TURN Max. turning diameter 220 mm Max. workpiece length 614 mm Max. circumferential diameter over bed cover 240 mm Max. chuck diameter 210 mm Max. distance between the two spindle lugs 800 mm Max. speed main spindle 4000 1/min Max. power main spindle at ED 10-40/100% 35.5/23.5 kW Max. torque main spindle at ED 10-40/100% 205/150 Nm Spindle aperture main spindle 72.5/66 mm Spindle diameter in the front bearing main spindle 110 mm Spindle flange size main spindle ASA 6 A2 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Stop device in the main spindle Coolant supply through the main spindle Max. s ...

This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.

This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021, offering advanced horizontal turning capabilities. Ideal for complex and precise metalworking tasks, this machine ensures efficient production with its robust design and modern technology. If you are looking to get high-quality turning capabilities, consider the CMZ TTL-66-66-TTY-T2Y machine we have for sale. Contact us for more information.

This CMS ESYM M3 1350 was manufactured in 2019. A deburring machine featuring 3 stations, including 1 belt and 2 brush stations, with only 80 operation hours. Ideal for enhancing finishing processes, the CMS ESYM M3 1350 machine we have for sale is a noteworthy addition to any production line. Contact us for more information.

This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information.

Used Used Capper CMI for Glass Jars: Year: 2001 Condition: Good Used Capper CMI for Glass Jars: Model: TA 4 PP Year: 2001 Speed: 4500 bph Direction: Clockwise Cap type: twist off 4 heads Distribution system: pick and place GENERAL DATA Safety protections Code: X 458 More details: https://bottlingscout.com

MULTI RIP SAW type CML SCA 320 with rip trimming unit with two circular blades with adjustable interaxle ( one moving saw ) Technical Details : carpet width mm. 320 max. cutting heigth mm. 120 minimum length of pieces mm. 300 blades diameter : min.mm.250 / max.mm.350 maximum distance between two external blades mm. 320 feeding speed mt/min. 0 / 36 motor power Hp 40 net weigth kgs. 2000 volt. 380/50

Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!

CME FU2 universal milling machine. Table: 1400x300mm. Longitudinal travel: 1050mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. Speeds range: 12. (40-1800rpm). Motor power: 7,5Kw. DRO Fagor for 3 axis.

aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication

Make CMC Model Q-Joint Year 1995? Working width 500 mm Thickness up to 80 mm Details Foot pedal operated

bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

Machine Details Stock number 1105-03751 Machine type CNC turning and milling center Make CMZ Type TB 67 M Year of construction 2007 Control type CNC Control Fanuc 32 I MANUEL GUIDE Storage location HAGUENAU Country of origin spain Delivery time immediately Freight base freely loaded truck, from location Technical details Turning diameter 385 mm Turning length 400 mm Control Fanuc 32 I MANUEL GUIDE Spindle bore diameter 73 mm Number of controlled axes 3 Speed range 20 - 4,000 rpm Drive power 17 kW Rapid traverse speed 30 m/min Number of mounts in turret head 12 VDI 30 of which driven stations 12 Speed of the driven tools 4000 rpm Drive power on the driven tool 6 kW Tailstock Yes Weight 4 t Information CNC lathe with driven tools and short bar loading magazine in very good condition. Accessories: FANUC 32i MANUEL GUIDE -Conveyor - Three-jaw chuck DIA 210  ...

CML moving blade multi-blade model SCA320R-T350 with: - 1 fixed blade + 1 movable blade with motorized positioning - 1 fixed laser + 1 mobile laser, for cutting line display - 350mm belt, useful cutting width 320mm - useful cutting height with movable blade 90mm (120mm without moving blade device) - main engine kW 22 / HP 30 - motorized lifting of the pressor - manual lubrication pump

Key data: 510 mm, 670 mm

machine details Stock-No. 1105-03944 Type of machine CNC Turning- and Milling Center Make CMZ Type TL 25 A SM Year of manufacture 2007 Type of control CNC Storage location FRANCE Country of origin espagne Delivery time to be agreed Freight basis EX WORK Technical details turning diameter 510 mm turning length 640 mm control FANUC 31 ITB bar diameter 66 mm Travel -X Axis 240 mm Travel -Z Axis 640 mm Turning speed range - drive spindle 4000 1/min spindle nose JIS A2-6 Spindle Bore 66 mm C-Axis 0.001° Spindle Bearing Diameter 110 mm turret head 12 Pos. Driven Tools 12 Pos. tool changing time 0,2 sec rapid traverse X-axis 18 m/min rapid traverse Z-axis 24 m/min Drive Capacity - Spindle Motor 19/14 kW power capacity - milling spindle 14/8 kW total power requirement 35 kW weight of the machine approx. 5.7 t dimensions of the machine approx. 2.4 x 1.8x 1.9 m  ...

CML 2-blade mobile multi-blade rip saw model SCA320 2R T350 , with separation line and return of pieces to the operator: – machine management from a separate control panel, with: CNI electronic programmer 2 joysticks for managing the 2 units with moving blade Variable feed speed (inverter), with digital display motorized positioning of the blade unit, with digital display Motorized positioning of the presser, with digital display Motorized positioning of the machine infeed guide – 1 fixed blade + 2 mobile recirculating blades – 1 fixed laser + 2 mobile lasers, for cutting lines – 350mm belt, 320mm useful cutting width – blade diameter from 220 to 350/360mm max – useful cutting height with 360mm mobile blades: 100mm – useful cutting height with 350mm movable blades: 95mm – useful cutting height with fixed sleeve and 350mm blades: 120mm – blade moto ...

Stock number: 3845 CNC BED MILLING MACHINE Manufacturer: CME , Type: MB-3000 FLEX Reconditioned spindle Year of construction: 2006 Specifications: Spindle speeds 2200 rpm Boring Spindle dia. 150 mm

WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :

Casing-in machine Make CMC Model Q-Case / Gemat Year 2011 Max size 500 x 420 mm (roll width 420 mm) Min size 100 x 120 mm Thickness 2 - 80 mm Available direct

Joint forming + pressing Make CMC Model Q-Case - Crator Year 2010 Max size 500 x 420 mm Min size 100 x 120 mm Thickness 6 - 80 mm Pressure up to 5.000 kg by hydraulics Available direct

Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.

CMA 5-axis painting robot mod. ROBY 5EX-R - used - N. 5 controlled axes - N. 3 supports - Wrist capacity 3 kg - Self-learning programming -Merry-go-round Number of arms 3 Single arm capacity 25 kg - Workpiece Wheel Servo movement controlled and synchronized - Complete with manual and CE declaration - RETROFIT 2024 (NEW OVERHAUL)

automatische Folieneinschlagmaschine - Wrapping & Shrinking Machines CMC FA-600 BT Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kreuzleger - Stacker CMC ROBOT 300 PMC Year 1994 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Self-learning lathe CMT TCH 700 x 5000 :::TECHNICAL SPECIFICATIONS::: CNC model: ECS - Spindle nose: ASA 11 - Spindle power: 35Kw - Turning diameter on the bench: 720mm - Turning diameter on the carriage: 385mm Turning length: 5000mm - Number of revolutions: 2200 - Bar passage: 105mm - Mechanical range change: yes - Number of ranges : 2 Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 12 First turret tool attachment type: VDI First turret X-axis travel: 450mm Z-axis travel first turret: 5000mm :::D DIMENSIONS AND WEIGHT::: Weight: 8000Kg

CNC teach-in lathe, CMT URSUS 250 PLUS, 250 center height, 1500 between centers, Under power in our warehouse in Gussago BS - Italy

Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...

Five axis machining centre CME QUICK 200 CNC - 2000x1000x1300 mm, 18.000 rpm, CNC SELCA 4045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2100x850 mm, Longitudinal travel x axis: 2100 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1300 mm, Cnc: SELCA 4045 PD, Spindle motor power: 26 Kw, Spindle speed: 18000 rpm, Spindle taper type: HSK 63, Automatic tools change nr.: 20, Approx net weight: 18.000 kg, Accessories: Continuos round table 800 mm, coolant thrugh spindle 15 bar, electronic handwheel SELCA SILBOX 2, chip conveyor

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table glue unit refurbished machine is cleaned and checked and in very good condition.

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

CMS automatic package cross cutting system, Type PMI 120 / EL+L+REG, Manufacture year 2014, - Max. pack size 5000 x 1200 x 1200 mm, - Saw motor 9.2 kW, - Touch screen cnc controller, - Waste conveyor

Lathe CMZ TTL 66 Year 2021 9500h Duty Cycle Hours

CMG-MAM BLOWN FILM EXTRUDER for LDPE, extruder with screw diam. 80 mm., Production rate about 150 kg/h, die diam. 150 mm. on rotating head, haul off unit width 1.200 mm., corona treatment, winder mm.1.200, max reel diam. 1.200 mm., min/max film width 600/1200 mm

Thicknesser planer CMC mod. SP350 - CE rules - S/N 531007 - Year 1998

Reconditioned 5 axis robot CMA mod. ROBY 5EX-G - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2025

General SKU399W1241 LocationBarneveld MakeCMR Brevetti Ravinet (Ita) Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor4 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface1 m² Capacity1170 ltr Vessel sizesdia. 1200x800mm Plate sizesdia. 1200mm Top connectionsdia. 125mm (1x) dia. 50mm (6x) dia. 25mm (3x) Solids outletdia. 250mm Liquid outletdia. 50mm With jacketcheck (26 ltr) Max. temperature-30/200°C With stirrercheck Motor4.0 kW, 400/690V, 1440 rpm Stirrer speed10 rpm Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) Information Type1 M2 Nutschefilter Mach.No.2016 Year of construction1989 Mounted on framecheck Floorspace2,0x2,0 m Total height3,2m Weight± 3000 kg Extra Specificationsthis machine is delivered with: che ...

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

General SKU215X093 MakeCMA LocationBarneveld CEcheck TypeMAT Main Features MaterialStainless steel Volume125 Ltr. Motor5 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity150 kg With motor1,1 kW, 400 volt, Speed mixer11 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) Information No.211 Year of construction2008 With switchcheck (as is) With switchgearcheck (as is) Total height3,50 m Weight1000 kg Extra Specifications- Tumbler mixer with sieve granulator attached - 4 containers with lid - sieve granulator with 4 sieves (nibbler) - control panel and e-panel (as is) Tumbler mixersNew arrivalsCMA QuimpeMixers > Tumbler mixersNew arrivalsBrand > CMA Quimpe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,00 ...

General SKU058H374 MakeCMA S.A. Quimper TypeCalibreur Taille 2 No.203 Year of construction1996 LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Width210 mm Specified Features - Sieve granulator Conical granulating sieve(1x) Sieve sizesdia. 210x125mm Sieve perforation1,0mm + 1,5mm + 2,0mm With hoppercheck Inletdia. 210mm Motor5,5 KW, 400 volt (Ex) With variable speed drivecheck MaterialStainless steel 1.4404 (316L) Information Mounted on wheelscheck With switchcheck Floor space2,0x0,9 M Total height1,7 M Weight600 KG ATEX compatiblecheckDiscountSieve granulatorsCMA QuimpeDiscountSieves > Sieve granulatorsBrand > CMA Quimpe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...

General SKUR0811 MakeCMR Brevetti Ravinet (Ita) LocationBarneveld Type2500 ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor3.6 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity3610 ltr (nett. 2500 ltr) Vessel sizesdia.1600mm x 2170mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connections3x DN200, 4x DN100, OutletDN100 Half coil jacketed(140 ltr( Max. temperature-30/200 degr.C With propellor stirrercheck Motor3.6 kW, 380 Volt(EX) Speed mixing shaft235 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.2010 Year of construction1989 Floorspace2,2x2,2 M Total height3,4 M Weight1700 Kg ATEX compatiblecheckStainless Steel ReactorsCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosm ...

General SKUR0823 LocationBarneveld MakeCMR Brevetti Ravinet (Ita) Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface8 m2 Capacity16900 ltr Vessel sizesdia.3300 x 2250mm Top connections2x DN600, DN200, 4x DN80, 2x DN40 Solids outletDN100 Liquid outlet10x DN40 With jacket(70 ltr) Max. temperature-30/200 degr.C With stirrercheck Motor15 kW, 380 Volt (EX) Stirrer speed8 rpm Cake capacity4000 Ltr Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) Information Type16900 ltr Mach.No.1998 Year of construction1988 Floorspace4,0x4,0 M Total height5,0 M Weight8000 Kg ATEX compatiblecheckCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants  ...

General SKUR0822 LocationBarneveld MakeCMR Brevetti (Ita) Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialHastelloy Motor11 KW Surface4 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface4 m2 Capacity5500 ltr Vessel sizesdia. 2270 x 1800 mm Top connectionsDN 125 (1x), DN 50 (3x), DN 40 (1x), DN 80 (4x)dia. 500 mm (manway) Solids outletdia. 490 mm Liquid outletdia. 50 mm With jacket(700 ltr) Max. temperature-30/200 degr.C With stirrercheck Motor11 kW 380 Volt (Ex) Stirrer can be liftedcheck MaterialStainless steel 2.4610 (Hastelloy C-4) Information TypeHC4 Mach.No.2015 Year of construction1989 Mounted on legscheck Floorspace3,1 x 3,1 M Total height4,6 M Weight7900 Kg ATEX compatiblecheckCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrgani ...