cm used for sale

With adjustable take-over outfeed conveyor, Belt width: 400 mm, Filling capacity: 27 litres, Power: 3 x 400V, 50Hz, 0.7kW, Dimensions: 2860 x 750 x 1450 mm, Weight: 390 kg

Manufacturer: CMC Model: Cartonwrap XL Year of Manufacture: 2019 TECHNICAL SPECIFICATIONS - Voltage: 400 V, 3F+N+PE - Frequency: 50/60 Hz - Current: 51 A - Air supply: 6 ATM MACHINE SPECIFICATIONS - Fanfold specs: from 800 mm to 1400 mm - Cut sheet specs: max W 1200 x L 2300 mm - Wave line specs: max reel width 1400 mm - Minimum box: W 250 x L 160 x H 35 mm - Maximum box (maximum width): W 800 x L 600 x H 215 mm - Maximum box (maximum height): W 490 x L 600 x H 370 mm - Maximum mechanical speed: 900 boxes per hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

model: BF-3008, version: Hydraulic/diesel, Weight: 50 tons, No-load shaft speed: 3 rpm, Wax shaft speed: 2.2 rpm, Max. total developable cup: 130,000 daNm, Per gear motor: 240 l/1, Maximum operating pressure: 260 bar, Year of construction: 2007, Operating hours: 4500 h

General SKUR0824 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface8 m2 Capacity16.900 l Vessel sizes3300 x 2500mm Top connections2x DN600, DN200, 4x DN80, 4x DN50, 2x DN40 Solids outletDN100 Liquid outlet10x DN40 With jacketcheck Max. temperature-30/200 degr.C With stirrercheck Motor15 kW (380 V, 1450 rpm (Ex)) Stirrer speed8 rpm Cake capacity4000 l Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) With jacketcheck General MakeCMR Brevetti Ravinet (Ita) Mach.No.1997 Year of construction1989 Mounted on framecheck Floorspace4,0 x 4,0 m Total height5,0 m Weight8200 kgPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgroche ...

General SKUR0822 LocationBarneveld MakeCMR Brevetti (Ita) Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialHastelloy Motor11 KW Surface4 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface4 m2 Capacity5500 l Vessel sizesdia. 2270 x 1800 mm Top connectionsDN 125 (1x), DN 50 (3x), DN 40 (1x), DN 80 (4x)dia. 500 mm (manway) Solids outletdia. 490 mm Liquid outletdia. 50 mm With jacketcheck Max. temperature-30/200 degr.C With stirrercheck Motor11 kW (380 V, 1450 rpm, (Ex)) Stirrer can be liftedcheck MaterialStainless steel 2.4610 (Hastelloy C-4) With jacketcheck General TypeHC4 Mach.No.2015 Year of construction1989 Mounted on legscheck Floorspace3,1 x 3,1 m Total height4,6 m Weight7900 kgPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyA ...

General SKUR0823 LocationBarneveld MakeCMR Brevetti Ravinet (Ita) Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface8 m2 Capacity16.900 l Vessel sizesdia.3300 x 2250mm Top connections2x DN600, DN200, 4x DN80, 2x DN40 Solids outletDN100 Liquid outlet10x DN40 With jacketcheck Max. temperature-30/200 degr.C With stirrercheck Motor15 kW (380 Volt, 1450 rpm (Ex)) Stirrer speed8 rpm Cake capacity4000 l Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) With jacketcheck General Type16.900 L Mach.No.1998 Year of construction1988 Floorspace4,0 x 4,0 m Total height5,0 m Weight8.000 kgPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemica ...

Measuring and evaluation electronics: Rotor Test 505, balancing planes: 1/2, max. rotor weight: 300kg, max. rotor length: 4000mm, max. rotor diameter: 1400mm. Documentation available. An on-site inspection is possible.

A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible.

CMC Italia Q Finish Crater 20 Book Press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl CMC Italia Q Finish Crater 20 Book Press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines CMC Italia Q Finish Crater 20 Book Press Price: 8750 EUR Download PDF CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air. Ask About The Product Nam ...

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg

This 10-axis CMZ TTL66 turn-mill centre was manufactured in 2025. It features a maximum swing diameter of 800 mm and a maximum turning diameter of 515 mm. The machine is equipped with twin spindles and twin Y-axis turrets, allowing for simultaneous 4-tool machining capability. If you are looking to get high-quality turning and milling capabilities, consider the CMZ TTL66 machine we have for sale. Contact us for further details regarding this machine.

CMC Italia Gemini Gem 52 Case in gluer - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl CMC Italia Gemini Gem 52 Case in gluer Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines CMC Italia Gemini Gem 52 Case in gluer Price: 6000 EUR Download PDF CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Power supply: 380 V W ...

Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: Inclu ...

This 3-axis DMG MORI CMX 600V was manufactured in 2017. It features a spindle speed range of 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm, along with a table size of 900 x 560 mm. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 600V vertical machining centre we have for sale. Contact us for further details.

Used Revised Air Compressor CMC CWA11-800 40 bar General Features of the Used Air Compressor CMC CWA11-800 40 bar The Used Air Compressor CMC CWA11-800 40 bar delivers high performance as an oil-free, three-stage unit, ideal for industrial environments that require high-quality compressed air. CMC manufactured this model in 2010 for air compression systems operating at up to 40 bar of working pressure. Since the unit uses dry-running cylinders, it eliminates the need for internal lubrication. Therefore, operators can use it in critical applications where they must avoid any air contamination. Moreover, its robust design ensures long-term durability and operational consistency. Technical Operating Specifications The Used Air Compressor CMC CWA11-800 40 bar operates with three cylinders across two compression stages. It draws air at atmospheric pressure and functions in ambient temperature ...

This 3-axis CMS Smartline 2040 waterjet cutting machine was manufactured in 2023. It features an impressive X-axis stroke of 4,000 mm, Y-axis stroke of 2,000 mm, and a maximum cutting thickness of up to 220 mm. The machine includes a robust worktable size of approximately 4,150 × 2,080 mm and is equipped with a high-pressure intensifier pump. If you are looking to get high-quality cutting capabilities, consider the CMS Smartline 2040 machine we have for sale. Contact us for further details.

This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details.

x-travel: 2500 mm y-travel: 1200 mm z-travel: 1000 mm turning speeds: 20-1600 U/min spindle taper ISO: SK50 Table dimensions: 2700x1000 mm control: Heidenhain TNC 426 milling head -swivable +/-: 360 +/- ° Spindle capacity: 20 Kw Tool changer: 36 Pos. Power connection: kVA weight of the machine ca.: 18 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad wa ...

Manufacturer: CMZ Model: TC20-YS/800 Type of machine: Turning center with driven tools, CNC lathe Year of manufacture: 2010 Control: Fanuc 31iT HVi with manual guide i Spindle configuration: main and counter spindle Collet system: Axfix collet system C-axes: HS and GS fully functional C-axes Turret: 16-position BMT turret, all stations driven Bar loader: 1-meter short bar loader from LNS Rod opening: 65 mm Hours 86K is control time 16.5K is runtime 17.5K is processing time Tool holders: 2 VK25 external turning holders, 2 D40 internal turning holders 4 D25 internal turning holders 3 axial driven tools 3 radial driven tools Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: 03401 / 2010 Flow rate / operating pressure: 36 m³/h at 3 bar Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E., dimensions according to the Ideal 360” manual.

FOR NOW - This TOP NEW LOG CABIN CARPENTRY MACHINE from KRÜSI type. CMI 4 x4.. Year of construction 2018 - High equipment, price incl. all tools, accessories, swivel console, as well as dismantling. This is really a SUPER opportunity. Max. wood cross-section 245 x 250 mm - lengths 13 m. Fully functional, of course. New price approx. 256,000 euros gross. Sale as viewed ex site without warranty and guarantee. More details and your inquiry...

The Alfa Laval CMPX 213 XGP-74/4171-40 self-cleaning sanitary disc separator is used as a recovery and rework separator. Its function is to separate residual fat from the heavy phase, produce clarified wastewater, and recover approximately 10–40% of the fat, which is returned into the reprocessing of the line., Machine comes with the bowl, motor (18,5 kW), base plate with feet, water valves, all inlet/outlet pipes with pumps, service tools for maintenance and a big lot of spare parts., Additional features:, � ��Excluding:, - Motor cover., - Control panel., This separator is part of a butteroil production and purification process. The process flow is illustrated in the attached P&IDs and flowcharts., Butterfat is first melted and conditioned in the T100 proces ...

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070236 : September 2026, Zwischenv : Türkei : 6900 € : 133.17 € : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 € : 572.81 € : 0.4 - 3.5 mm : 200 mm : 700 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make CMC, Model Q-Joint, Year 1995, Working width 500 mm, Thickness up to 80 mm, Details Foot pedal operated, on request we can upgrade to adjustable temperature, on request we can upgrade to pneumatic operated activation, Working width: 500 mm, Thickness: up to 80 mm, Electric current: Single phase, 240V

Three knife trimmer - in-line, Serial: 05010048, Min untrimmed size: 178 x 127 mm, Min trimmed size: 148 x 100 mm, Max untrimmed size: 330 x 241 mm, Max trimmed size: 307 x 328 mm, Stack height: 51 mm, Min trim: 2.5 mm, Max trim: 152 mm, Speed: up to 400 cycles per hour in single stream mode, Memory: up to 99 set-ups, Change over time: Fully automatic within 20 seconds

CMC Lynx 75 BC, Year 2000, Size: 750 mm, glue types:, - cold PVA glue, - warm animal glue, 3 phases 380 volts, warm glue by heating from under the bin, the bin is a double wall water filled model, glue rollers have been grinded

General SKU226Y423 MakeFiltrox AG Serial9125248 TypeCMF Pilotanlage Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4435 (316L) General Year of construction2008 LocationBarneveld Floor space1,10x2,50 m Total height2,25 m Weight800 CEcheck Extra information pressure 8 bar, allowable temperature 100°C, with4x membrane filter, 2x 800 Nm and 2x 5 Nm,  Stainless steel vessel, 110 l., hot water vessel,  Alfa Laval heat exchanger, type M3-base, volume 1,5 l., 9 bar, temp max 105°C ETS heat exchanger, typ: GK10-40/1/1-K-14-V, 10bar, 100°C and 180°C centrifugal pump: hilge, typ: euro-Hygia 1, 1m³/h, 1,5kW centrifugal pump: hilge, typ: euro-Hygia 2, 8m³/h, 7,5kW Endress+ Hauser flow valves, Siemens touchscreen control, type Simatic panel, Yokogawa control. Powdered foodsGeneric medicinesOintment ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 € : 233.28 € : 0.4 - 2 mm : 100 mm : 200 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 900 mm z-travel: 620 mm Control: Heidenhain TNC 640 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Milling-turning machining center The machine is being sold in a defective condition. The rotary tilting table needs to be repaired. Spindle torque: 253NM / 12000min-1 / HSK 63 Travel paths: 800/900/620mm Control: Heidenhein TNC 640 Turning function: 4000Nm / 750rpm / diameter 800mm / max. 2000kg Pallet changer: 6-pos, Pallet weight max 1 ton (pallet + workpiece) Tool changer: 60 places (expandable to 120 places) incl. spare spindle incl. pallets optional: 4-jaw chuck SMW Autoblok Operating hours: 3469 h (Jan. 2025) X-axis travel: 800 mm Y-axis travel: 900 mm Z-axis travel: 620 mm X-axis rapid traverse: 50 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Torque: 253 Nm Control manufacturer: Heidenhein ...

Boring power: 16 mm table-size: 280 x 360 mm quill stroke: 120 mm total power requirement: 0,8 kW weight of the machine ca.: 350 kg - Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz - speed (stepless): 460 - 1840 U/min , 140 - 560 U/min - Table dimensions: 280 x 360 mm - Adjustment travel table: 540 mm - Holder: MK 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 € : 209.28 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CMP 100 TOPN ist eine Hydraulische Presse, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Arbeitsdaten: Gesamtabmessungen HxBxT 1700 x 2300 x 950 mm; Maschinengewicht ca. 600 kg. Technische Eckdaten: kompakte, stabile Bauweise für stationäre Belastungen. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 € : 248.64 € : 0.4 - 2 mm : 300 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 2019 CMA Machine Tools 3RD CNC 4506 is a high-performance machining center featuring an OMRON industrial 15.4 touchscreen Controller. With 3 (X/Y/Z) controlled axes and 3 (X/Y/Z helical interpolation) simultaneous axes, it offers a generous X-axis travel of 4500 mm, Y-axis travel of 600 mm, and Z-axis travel of 450 mm. The BT40 (MAS 403 BT) spindle delivers up to 4000 rpm, 13.1 kW power, and 125 Nm torque. Equipped with a 10-position rotary tool magazine and 4 bar coolant through spindle, this machine is optimized for structural parts. With only 692 spindle working hours, this CE-compliant unit includes an emulsion coolant system, chip conveyor, and advanced programming capabilities for efficient production.

DMG Mori CMX 600V CNC Bearbeitungszentrum (2018) Hersteller: DMG Mori Typ: CMX 600V CNC Bearbeitungszentrum Baujahr: 2018 Zustand: gebraucht, unter Produktion Einschaltstunden: 514h Spindelstunden: 142h Weitere Informationen folgen

CMC Q Cover Two LPA2 50-70 Hard Cover Maker - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl CMC Q Cover Two LPA2 50-70 Hard Cover Maker Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines CMC Q Cover Two LPA2 50-70 Hard Cover Maker Price: 15000 EUR Download PDF CMC Q Cover Two LPA2 50-70 Hard Cover Maker The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components:  ...

CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine Price: 22000 EUR Download PDF CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while  ...

turning diameter: 255 mm turning length: 500 mm control: FANUC 31i model B Drive tool: 18Kw spindle drive: 15/11 und 7,5/5,5 kW rapid traverse Z-axis: 20 m/min rapid motion - y-axis: 12 m/min rapid traverse X-axis: 16 m/min rapid traverse X-axis: 16 m/min spindle nose: A2-8/A2-6 bar material dia.: 66 mm centre distance: 639 mm Chip coveyor: swing dia.: 270 mm total power requirement: 65 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 2,85 x 2,2 x 2,05 m -Two 12-station turrets (24 positions total), each with 12 driven tool stations -Y-axes on both turrets -Sub-spindle travel: 635 mm -Sub-spindle rapid traverse: 30 m/min -Travel – X (Turrets 1 & 2): 190 mm -Travel – Y (Turrets 1 & 2): ±40 mm -Travel – Z (Turrets 1 & 2): 500 mm -Spindle speeds – infinitely variable (S1 / S2): 4,000 / 5,000 rpm -Spindle bearing diameter: 120 / 100 mm, C-axis: 0.001° -Turret 1 s ...

Roundo R4S 30 cm3 Dia rolls: 275 mm Dia of die mandrel: 105 mm Rotationspeed: 1 > 5 m/min Motorpower: 5,5 kW - 8,6 HP Length : 1250 mm Depth: 1250 mm Height: 1500 mm Weight: 3 ton

CMF 700L mixing vessel 2017, Stainless, 700L capacity, top mounted motor with agitator, 3.0Kw motor, side bottom discharge, with timer, on mobile frame, 3Ph

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 3,56 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDire ...

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsMaximum load (table centre)1000 KgDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsDrive power (40% DC)13 kWMax. torque83 NmTorque (100% DC)57 NmDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1400 x 560 mmWeight approx.6050 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 20 bar with chip conveyorProduction Package ...

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,6 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque121 NmTorque (100% DC)84 NmDrive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmMaximum load (table centre)1000 KgWeight approx.6200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Option  ...

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.6050 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 3 with Chip ConveyorProduction Package 3 Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarfPrep. 4th axis EA 510.L indirect (Heidenhain ...

GeneralUniversal Milling Centre; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal750 mmCross600 mmVertical520 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightWeight approx.8000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only! Type of Measuring system Direct measuring system Table surface Ø 800 x 620 mmMaximum load (table centre) 350 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) -10/+95 x 0,001 degreeMode for positioning only Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge ...