127,518 used machines on RESALE, but how to find them? Machine Search
CMG-MAM BLOWN FILM EXTRUDER for LDPE, extruder with screw diam. 80 mm., Production rate about 150 kg/h, die diam. 150 mm. on rotating head, haul off unit width 1.200 mm., corona treatment, winder mm.1.200, max reel diam. 1.200 mm., min/max film width 600/1200 mm
A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.
General SKU446W1488 MakeSymex Schröder &: Boos TypeCML 125 No.SY900794 Year of construction2003 Mounted on legscheck Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume125 Ltr. Motor6.5 KW Specified Features - Processing vessel Reactorcheck Capacity215 l. (netto 125l) Vessel sizesDia. 650x1500 mm OutletDN50 With jacketvolume 20l Max. temperature151,3°C Motor6,5 kW, 400 volt, 2495 rpm With jacketcheck Processing vessels Closed stirring vesselcheck Capacity215 l. (netto 125l) Vessel sizesDia. 650x1500 mm Dished bottomvolume 20l Dished top sidecheck With covercheck Top connectionscheck OutletDN50 With jacketVolume 20 l. Max. temperature151,3°C With anchor stirrerwith scrapers With paddle stirrercheck Motor6,5 kW, 400 volt, 2495 rpm With homogeniser ...
SPECIFICATIONS: Heating capacity: 928 kW - 800,000 kCAL/h Maximum operating pressure: 2 bar Fuel: wood waste Electrical power: 10.6 kW COMPLETE WITH: -Damper flap - Chip hopper - Safety thermostat - Operating pressure gauge - Motor variator - Combustion air blower - Spiral screw - Electrical control cabinet - Burner (EcoFlam MAIOR P 35 TL)
Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG
Used CMF microfiltration made by GEA. New: 2013. CMF membrane installation. Ceramic membranes: 1.2 microns. Capacity 22.000 liters / hour.
Engine Brand: CUMMINS, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 2500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/cummins-isb-cm550-cpl-2571 -new/551, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: ISB CM550 CPL 2571; Transport weight [kg]: 950
x-travel: 2500 mm y-travel: 1200 mm z-travel: 1000 mm turning speeds: 20-1600 U/min spindle taper ISO: SK50 Table dimensions: 2700x1000 mm control: Heidenhain TNC 426 milling head -swivable +/-: 360 +/- ° Spindle capacity: 20 Kw Tool changer: 36 Pos. Power connection: kVA weight of the machine ca.: 18 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad wa ...
• Brand: C.M.I, • Model: BF 4000, • Serial No.: 0046, • Year of construction: 2006, • Operating hours: approx. 4,500 h, • Weight: 62 t (without accessories), • No-load shaft speed: 3 rpm
Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Optima CMF: Packaging machine Application: For erecting and closing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics to precisely place products and accessories such as spatulas, brochures, or flip-flop sheets. Flexibility: Can also be designed for food and chemical products in other versions of the machine
Manufacturer: MEURER Type: CMK/M Angle welding machine + shrink tunnel Last used as a bundle packer for processed cheese (round cartons) El. Power: 8 kW Voltage: 380 V Condition: good, fully functional
Thicknesser planer CMC mod. SP350 - CE rules - S/N 531007 - Year 1998
Reconditioned 5 axis robot CMA mod. ROBY 5EX-G - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2025
Height=1.84 m, Overall length= 0.92 m, Overall width= 0.88 m, Net weight= 246 kg,
This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.
This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.
This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine.
This CMS ESYM M3 1350 was manufactured in 2019. A deburring machine featuring 3 stations, including 1 belt and 2 brush stations, with only 80 operation hours. Ideal for enhancing finishing processes, the CMS ESYM M3 1350 machine we have for sale is a noteworthy addition to any production line. Contact us for more information.
General SKU399W1241 MakeCMR Brevetti Ravinet (Ita) Type1 M2 Nutschefilter Mach.No.2016 Year of construction1989 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor4 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface1 m² Capacity1170 ltr Vessel sizesdia. 1200x800mm Plate sizesdia. 1200mm Top connectionsdia. 125mm (1x) dia. 50mm (6x) dia. 25mm (3x) Solids outletdia. 250mm Liquid outletdia. 50mm With jacket(26 ltr) Max. temperature-30/200°C With stirrercheck Motor4.0 kW, 400/690V, 1440 rpm Stirrer speed10 rpm Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) With jacketcheck General Mounted on framecheck LocationBarneveld Floorspace2,0x2,0 m Total height3,2m Weight± 3000 kg Extra Specificationsthis machine is delivered w ...
General SKU259N208 MakeHolmes Freres Ingenieurs TypeCMA 15/36 No.10/3301 Year of constructionUnknown Mounted on framecheck Main Features MaterialMild steel Motor30 KW Surface1 m2 Specified Features - Roll dryer Roll coolercheck Roll sizesø 360 x 915 mm Cooling mediumwater Feeding with pouring gaphopper inlet 1,0 x 0,7 m With knife dischargecheck Motor± 30 kW (400V, 1450 rpm) Roll speed± 500 rpm MaterialMild steel With jacketcheck General LocationBarneveld Floorspace+/- 2,2 x 1,2 m Total height+/- 2,0 m Weight1300 kg Extra SpecificationsChamber material stainless steelRoll dryersHolmes Freres IngenieursDryers > Roll dryersBrand > Holmes Freres Ingenieurs What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...
GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...
Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...
Geared motor, electric motor, electric geared motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, geared motor servo motor -Gearbox: Type KHF47/A 11 rpm i 131.87 -Motor: Type CMP71S/PK/RH1M/SM1 -Speed: 0 - 2000 rpm -Design: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205/H210 mm -Weight: 33 kg
Motor control, controller, converter, stepper drive, stepper motor control, frequency converter, motor controller, servo drive controller -Manufacturer: Festo, Motor Controller -Type: CMMS-AS-C4--3A G2 572986 -Number: 6 controllers available -Price: per piece -Dimensions: 310/60/H180 mm -Weight: 1.4 kg/pc.
gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg
Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank, compressed air storage -Compressed air tanks: compressed air storage -Type: CMBB container Ø 200 x 400 mm -Contents: approx. 12 L -Operating pressure: 11 bar -Technical data: see photo type plate -Dimensions: 500/270/H235 mm -Weight: 6.5 kg
This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information.
Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: SEW-Eurodrive, servo geared motor with brake -Type: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 -Motor: Speed: 4500 / max: 9000 rpm -Gearbox: i= 18.94 -Shaft: Ø 20 x 40 mm -Protection class: IP65 -Brake: 2.4 Nm -Technical data: see photo of the nameplate -Number: 7x geared motors available -Price: per piece -Dimensions: 455/180H170 mm -Weight: 10.5 kg/pc.
This 3-axis Bridgeport VMC600 22 digital was manufactured in 2000. Its a vertical machining center equipped with the Heidenhain T.N C 426 control system, ensuring precise and efficient milling operations. Ideal for a variety of milling applications, this machine represents a valuable addition to any workshop. If you are looking to get high-quality milling capabilities, consider the Bridgeport VMC600 22 digital machine we have for sale. Contact us for further details regarding this machine.
Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer -1-0-24 bar, unused, original packaging -Type: 1/BS 64/2 100Ø M20x1.5 -1-0-24 kp/cm² -Quantity: 1x pressure gauge available -Cardboard dimensions: 150/120/H60 mm -Weight: 0.6 kg
For Sale: Automated Film Wrapping and Strapping Packaging Machines 1. Film Wrapping and Shrink Packaging Machine — CMB 600 Manufacturer: CMB Model: 600 Description: Automated film‑wrapping and shrink‑packaging machine designed to wrap products in suitable plastic films, seal them, and optionally shrink them for stable, transport‑ready bundles, operating with multiple modules, safety systems, and format‑adjustment options. 2. Automatic Strapping Machine — RQ-8X Manufacturer: StraPack Corp Model: RQ-8X Automatic Strapping Machine Description: An automatic strapping machine that applies, tensions, and seals polypropylene straps around packages to secure them quickly and consistently. Benefits of Combined System Together, both machines serve to stabilize, protect, and prepare goods efficiently for storage or shipment through reliable wrapping and strapping processes. F ...
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...
Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer -1-0 bar, unused, original packaging -Type: 1/BM 20/2 160Ø -1-0 kp/cm² -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 200/180/H70 mm -Weight: 0.9 kg
Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer -0.4-0-0.6 bar unused -Type: Ø 160 -0.4-0-0.6 kg/cm² -Number: 8x pressure gauges available -Price: per piece -Dimensions: 200/160/H50 mm -Weight: 0.5 kg
Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible.
A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.
Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.
TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm
A double column cold mixing system Mixaco is available. Material: steel, usable volume: 800l, motor power: 30kW, mixing vessel: conical, mixing blades: dispersion blades, machine dimensions X/Y/Z: 2900mm/2850mm/3500mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible.
turning diameter: 815 mm turning length: 3000 mm control: ECS 2402 swing over bed: 815 mm centre distance: 3000 mm swing diameter over slide rest: 485 mm spindle bore: 137 mm spindle turning speed range: 1200 U/min rapid traverse: 5 m/min spindle motor: 28 kW tailstock quill diameter: 115 mm tailstock quill stroke: 250 mm total power requirement: 30 kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 5,87 x 2,10 x 2,10 m Equipment: CNC-control E.C.S. 2402 3-jaw chuck 4-jaw faceplate, diameter 700 mm 4-jaw faceplate, diameter 400 mm 3 Steady rests Chip Conveyor Without boring bar holder and boring bar. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible.
Various flat knitting machines with different gauges and Groz-Beckert needle sets are available. 1) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 2) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 3) Stoll CMS 303 TC, gauge: E12, nominal width: 1270mm, needle set: 12. 4) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 5) Stoll CMS 340 TC, gauge: E12, needle set: 12. 6) Stoll CMS 411, gauge: E10, needle set: 10. 7) Stoll CMS 422 TC, gauge: E12, needle set: 12. 8) Stoll CMS 422 TC, gauge: E12, needle set: 12. 9) Stoll CMS 422.6, gauge: E12, needle set: 10. 10) Stoll CMS 422.6, gauge: E12, needle set: 10. 11) Stoll CMS 422.6, gauge: E14. 12) Stoll CMS 422.6, gauge: E14. 13) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 12. 14) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 10. 15) Stoll CMS 4 ...
turning diameter: 120 mm turning length: 640 mm control: Fanuc 32iT total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
