cm used for sale

Manufacturer: Grundfos Type: CME 3-5 A-R-I-E-AQQE S-A-D-N Condition: as new (short in operation) Pump speed: 3480 1/min Nominal flow rate: 3.72 m³/h Nominal head: 49.62 m Number of wheels: 5 Ambient temperature: -20 .. 55 °C operating pressure: 16 bar Location: Homburg

bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 450 x 350 mm

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,82 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system ...

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDire ...

Control NCT ... 104 Clamping table surface ... 3100x1000mm Axis X ... 3000mm Axis Y ... 1200mm Axis Z ... 1000mm Spindle speed ... 0-4000 rpm The machine is in good condition, possible to test under electricity.

Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²

GRP - fan for conveying corrosive or aggressive gases. Due to the size the fan housing is dismantled at the moment.

This 3-axis DMG MORI CMX 800V was manufactured in 2020. It features an X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a robust table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 800V vertical machining centre we have for sale. Contact us for further details.

Manufacturer | Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz Type | Type: CMB 16 Pinole Lift | Quill stroke: 120 mm Speed (infinitely variable) | speed (stepless): 460 - 1840 rpm ; 140 - 560 rpm Dimensions table | Table dimensions: 280 x 360 mm Adjustment range table | Adjustment travel table: 540 mm Recording | Holder: MK 2 Connected load | Connection Value: 0.8 kW Total weight | Total Weight: 350 kg

Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...

Stock number: 3845 CNC BED MILLING MACHINE Manufacturer: CME , Type: MB-3000 FLEX Reconditioned spindle Year of construction: 2006 Specifications: Spindle speeds 2200 rpm Boring Spindle dia. 150 mm

This 3-axis DMG MORI MORI CMX 1100 V was manufactured in 2018. It features an X-axis travel of 1,100 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,400 x 560 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details.

This 3-axis DMG MORI CMX 1100 V was manufactured in 2019. It features an X-axis travel of 1,100 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1,400 x 560 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details.

Used Cincinnati conical twin-screw extruder model CMT 35. 2 pieces available: 1 pc. - new 1989 1 pc. - new 1990 Technical data: - drive: DC 9kW motor - heating zones: cylinder - 3, head - 3 - cylinder cooling - oil - vacuum degassing pump

Balemaster Year: 2006 Type: CMG 268 Waste compactor

WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :

Offer 24033 Specifications: - Tapping capacity M 3 - M 24 - Working range ( swivel radius ) 1800 mm - Infinitely variable speeds up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - Various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

This 3-axis DMG Mori Seiki CMX 800 V was manufactured in 2017. It features a travel range of 800 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a robust table size of 1,100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki CMX 800 V vertical machining centre. Contact us for further details.

CMA 5-axis painting robot mod. ROBY 5EX-R - used - N. 5 controlled axes - N. 3 supports - Wrist capacity 3 kg - Self-learning programming -Merry-go-round Number of arms 3 Single arm capacity 25 kg - Workpiece Wheel Servo movement controlled and synchronized - Complete with manual and CE declaration - RETROFIT 2024 (NEW OVERHAUL)

CNC teach-in lathe, CMT URSUS 250 PLUS, 250 center height, 1500 between centers, Under power in our warehouse in Gussago BS - Italy

Kreuzleger - Stacker CMC ROBOT 300 PMC Year 1994 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control

Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

Manufacturer: Vollmer, Type: CMS 13M, Year: 1994, Bore diameter: 5 - 50, Max. disk diameter in mm: 200, Min-max external diameter mm: 20 - 525, Min.-max. tooth pitch mm: 26 , Year :1994

KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE- marked Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely re ...

Five axis machining centre CME QUICK 200 CNC - 2000x1000x1300 mm, 18.000 rpm, CNC SELCA 4045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2100x850 mm, Longitudinal travel x axis: 2100 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1300 mm, Cnc: SELCA 4045 PD, Spindle motor power: 26 Kw, Spindle speed: 18000 rpm, Spindle taper type: HSK 63, Automatic tools change nr.: 20, Approx net weight: 18.000 kg, Accessories: Continuos round table 800 mm, coolant thrugh spindle 15 bar, electronic handwheel SELCA SILBOX 2, chip conveyor

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - .ucymachines/ Contact us at - sales@ucymachines

WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible.

CNC vertical machining center Type: CMX 600 V Manufacturer: DMG MORI Year: 2017 Control: Fanuc 0i-MF X: 600 mm Y: 560 mm Z: 510 mm Max spindle speed: 12000 rpm Max workpiece high: 630 mm Max workpiece length: 900 mm Max workpiece width: 560 mm Max workpiece weight: 600 kg Machine weight: 4700 kg The machine has automatic tool change, allows the use of program cycles Possibility of precise positioning of the spindle. In very good condition, worked few hours, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

CINCINNATI CMT 35 APC, twin conical screw extruder, 2x35 mm screws, Control panel, 7,1 kw drive, 57.000 working hours, installed power - used power in work: about 60-65% : 7,1, type: PVC

Manufacturer: MINIPAN Model: CMBY 0400X000.06 GIROPN Year of Manufacture: 2011 Type of Machine: Soft dough biscuit forming machine • Power supply: 400V • Power consumption: 3.2 kW • Backlit LCD display with touchscreen • Rollers for soft dough • Fixed molds with wire cutter • Rotating molds: guillotine that opens when the dough is placed and then closes for precise dosing without dripping • Sheet size: width 400 mm, Length: min. 600 mm, max. 800 mm • Sheet types: 2 internally inclined edges, magazine for up to 20 sheets • Dimensions: Length = 2600 mm Width = 990 mm Height = 1400 mm Weight = 530 kg • Sugar dispenser at the machine outlet • DÜBOR TSA 800/10 plate lubricator (, 2012) with 5 spray nozzles Find more here - .ucymachines/ Contact us at - sales@ucymachines

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table glue unit refurbished machine is cleaned and checked and in very good condition.

Offer 25118 Specifications: - Tapping capacity approx. M 3 - M 8 - Working range ( swivel radius ) approx. 1800 mm - Multi-position head - Speeds: 8 - 700 rpm - Quick-change tool mount size 1 dia.19 - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space requirement approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Useful cutting length 4,000mm Cutting thickness 4/7mm Adjustable blade spacing motorized backgauge with 1,000mm stroke programmer Adjustable cutting angle 250mm recess machine in good general condition visible in operation at our headquarters!

Zeiss Pro T advance 16/21 measuring machine

Lathe CMZ TTL 66 Year 2021 9500h Duty Cycle Hours

CMZ TTL-66-66-T1Y-T2Y+GL20II CNC Lathe GENERAL Project No.: 905769 Quantity: 1 pcs. Manufacturer: CMZ Type: TTL-66-66-T1Y-T2Y+GL20II Control: Fanuc 31i B Year of Make: 2021 Condition: Used machine Approx (hrs): 9050 DESCRIPTION TURN Max. turning diameter 220 mm Max. workpiece length 614 mm Max. circumferential diameter over bed cover 240 mm Max. chuck diameter 210 mm Max. distance between the two spindle lugs 800 mm Max. speed main spindle 4000 1/min Max. power main spindle at ED 10-40/100% 35.5/23.5 kW Max. torque main spindle at ED 10-40/100% 205/150 Nm Spindle aperture main spindle 72.5/66 mm Spindle diameter in the front bearing main spindle 110 mm Spindle flange size main spindle ASA 6 A2 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Stop device in the main spindle Coolant supply through the main spindle Max. s ...

OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse