cm used for sale

Interlinking unit ORSTA Type 3 TGL 10952/03 Nominal pressure: 32 MPa ( 320 bar ) for a pressure switch type COL, CML Thread: M27 x 1,5 cable connection: 2x M14 x 1.5 hole spacing mounting screws: 54 mm, 2x diameter: Ø 8.4 mm New ! Dimensions: 77 x 62 x 50 mm

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

Throttle valve, hydraulic valve ORSTA, EINSPRITZGERÄTEWERK AKEN AOS 8 TGL 10962 nominal pressure: 160 kp/cm² ( approx. 160 bar ) nominal diameter: 8 mm Flow rate max: 10 l/min pipe installation, without check valve, with adjusting pin 2x Connection thread: M16 x 1.5 Installation length: 90 mm used, tested ! Dimensions: 90 x 100 x 47 mm

Throttle valve, hydraulic valve ORSTA, EINSPRITZGERÄTEWERK AKEN AOS 13 TGL 10962 nominal pressure: 160 kp/cm² ( approx. 160 bar ) nominal diameter: 13 mm Flow rate max: 25 l/min Pipeline installation, without check valve, with adjusting pin 2x Connection thread: M22 x 1.5 Installation length: 104 mm used, tested ! Dimensions: 104 x 112 x 52 mm

Throttle valve, hydraulic valve ORSTA, EINSPRITZGERÄTEWERK AKEN AOS 20 TGL 10962 nominal pressure: 160 kp/cm² ( approx. 160 bar ) nominal diameter: 20 mm Flow rate max: 63 l/min pipe installation, without check valve, with control pin 2x Connection thread: M30 x 2.0 Installation length: 126 mm used, tested ! Dimensions: 126 x 142 x 60 mm

Axial piston pump, hydraulic pump DAIKIN INDUSTRIES LTD. V8A1RX-20 Vmax.: 8 cm3/U Pressure setting range: 8 - 70 bar shaft diameter: Ø 16 mm Wavelength: 32 mm Groove width: 5 mm Flange diameter: Ø 63 mm hole spacing: 100 mm 2x U-hole: Diameter: Ø 9 mm, Length: 15 mm New ! Dimensions: 205 x 145 x 135 mm

axial piston motor, hydraulic motor ORSTA 20/6,3 TGL 10857 Nominal pressure: 6.3 MPa ( 63 bar ) Pmax.: 80 bar Displacement volume: 20 cm3 Speed range: 10 - 1500 rpm Shaft diameter: Ø 18 mm Shaft length: 38 mm Groove width: 4 / 6 mm Flange diameter: Ø 90 / 150 mm bolt circle diameter: Ø 130 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 245 x 150 x 150 mm

Hydro accumulator, diaphragm accumulator, bladder accumulator, pressure accumulator HAWE AC 13-1/4-100 capacity: 0.013 l ( 13 cm3 ) Pmax.: 500 bar Hydraulic connection: 1/4 ( inch ) male thread New ! Dimensions: 76 x 44 x 44 mm

Hydraulic motor, axial piston hydraulic motor MW-HYDRAULIK, Maschinenwerke Frankfurt a. M.; , W. Ullrich GmbH HM 7 ( HM7 ) p: max. 100 bar q: 51.3 cm3/revolution M: max. 80 Nm at 100 bar n: max. 1000 rpm shaft diameter: Ø 22 mm Wavelength: 50 mm groove width: 6 mm Flange diameter: Ø 70 / 110 mm bolt circle diameter: Ø 92.5 mm 4x threaded hole: M8 x 1.25, depth: 25 mm Hydraulic connections: 2x 1/2 ( inches ), 1x 1/4 ( inches ) New ! Dimensions: 275 x 120 x 110 mm

Hydraulikpumpe ORSTA, VEB HYDRAULIK NORD Type: CA 0,CA 0,4 ( CA0.4 ) TGL 17-747404 Volumetric flow rate ( V ): 0.4 m3/h Discharge pressure ( p ): 1.0 MPa ( 10 bar / 10 kp/cm² ) Nominal speed ( n ): 1425 - 1450 rpm shaft diameter: Ø 10 mm Wavelength: 23 mm Groove width: 3 mm Pump base: 95 x 98 mm hole spacing (parallel to shaft): 70 mm hole spacing ( transverse to shaft ): 70 mm hole diameter: Ø 7 mm New ! Dimensions: 160 x 145 x 120 mm

Hydraulic motor, gear motor ORSTA 20/20.0-110 TGL 37070 ( TGL37070 ) Nominal torque: 57 Nm Speed range: 240 - 3000 rpm Nominal speed: 1500 rpm Nominal pressure: 20 MPa ( 200 bar ) Nominal displacement volume: 20 cm3 shaft: Ø 25 mm, with cone 1 : 10 Thread: M16 x 1.5 Flange: 156 x 132 mm New ! Dimensions: 205 x 135 x 160 mm

Hydraulic pump with motor, axial piston pump PARKER pump: PV080R1K1S1NPWS Pressure ( P max ): 420 bar Continuous pressure ( pd max ): 350 bar Flow rate ( Vg max ): 80 cm3 / U Speed ( n max. ): 2000 rpm Motor: ADDA Antriebstechnik Type: FCP225MT-4 45 kW 1475 rpm 380 / 660 V 3AC, 50 / 60 Hz IP55 used, tested ! Dimensions: 1300 x 800 x 800 mm

Hydraulic pump, axial piston pump PARKER PV046RIKITINFPG Vg: 46 cm3/U 8pd: 350 bar p max: 420 bar shaft: Ø 32 mm Flange: Ø 125 mm Dimensions: 310 x 230 x 180 mm

Specifications Maximum pressure: 16 tons Power supply: 400V / 4kW Press force: 1.66 kg/cm² B Year of construction: 2006 Bale size: 1200x800x800 mm Productivity:- Bale weight: approx. 200-300 kg Price: on request

Gear pump, hydraulic pump REXROTH, BOSCH AZPF-11-008RAB1MG 0510 425 044 ( 0510425044 ) Pressure: max. 2800 bar Volume: 8 cm3/revolution Speed: max. 400 rpm Shaft diameter: Ø 18 mm Shaft length: 30 mm Groove width: 6 mm flange: Ø 80 / 125 x 90 mm hole spacing: 100 / 72.5 mm New ! Dimensions: 127 x 90 x 125 mm

Hydraulic pump, axial piston pump PARKER PV080R1K0S1N-PRZ Vg max: 80 cm3/U < br />pd max.: 350 bar p max: 420 bar shaft: Ø 40 mm Flange: Ø 160 mm Dimensions: 460 x 220 x 400 mm

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994

Hydraulic pump with motor VICKERS 25V14A 1A 22R Vmax.: 45 cm3 / revolution pmax.: 170 bar engine: 18.5 kW 1450 rpm 220 / 380 V used, tested ! Dimensions: 870 x 410 x 350 mm

Double hydraulic pump with motor BUCHER HYDRAULIK QT62-100/43-025R 180 / 250 bar 100 / 25 cm3/U Motor: 30 kW 380 V IP54 New ! Dimensions: 1350 x 480 x 450 mm

Very well maintained SLM 280HL 2.0 (dealer demo machine) with approx. 1900 laser hours for sale., The system has been cleaned without powder and is ready for shipping. The system was professionally dismantled by SLM dealers., Direct link: https://www.maschinenmarkt.layerbylayer.de/angebote/4427000-bedarf-201 8-slm-solutions-slm-280hl-2-0-single, Installation: 2018, equipment: HRSH 050 L/W 5kW cooling unit, PSM 100 V3 vibrating screen station, SLM AMC 330 safety vacuum cleaner, BPH 280 handling device, Installation space in mm (x/y/z): 280x280x350, laser power: 400W, build speed: 35 cm3/Hour 35 cm3/Hour, practice layer thickness: 20-100μm, Min. track width / wall thickness: 180µm, Operative beam focus freely selectable: 100µm - 700µm, compressed air requirement: ISO 8573-1, 18l/ bar, Dimensions in mm (w x h x d): 1800 x 1900 (2400) x 1000, Weight in kg: approx. 1000, E-connect ...

Gear pump, hydraulic pump MARZOCCHI 0,25 D 24 ( 0,25D24 ) 26 cm3/U max. 190 - 230 bar max. 7000 rpm shaft diameter: Ø 6 mm sShaft length: 16 mm groove width: 2 mm shaft threaded bore: M6 x 1.0, length: 8 mm Flange: 80 x 50 mm hole spacing: 66 mm hole diameter: Ø 7 mm New ! Dimensions: 80 x 76 x 50 mm

Hydraulic pump ORSTA 10/20.0-110 TGL 37069 Nominal pressure: 10 MPa ( 100 bar ) Nominal displacement volume: 20 cm3 Nominal speed: 1500 rpm Flange: 115 x 105 mm New ! Dimensions: 160 x 105 x 115 mm

Laboratory balance, precision balance, beam balance CMK 50 - 1000 g Weighing pan diameter: Ø 145 mm Year of construction: 1987 used, tested ! still preserved ! Dimensions(Assembled): 500 x 170 x 450 mm

Manufacturer: FritschModel: FT 350/700With 7 pieces of cutting rollersBelts Dimensions: W: 350cm D: 65cm- Outer dimensions W.: 357 cm, D.: 73 cm, H.: 110 cmDetails see pictures

caliper, analogue workshop caliper with vernier Top/ Bottom MITUTOYO CM150 160-110 0 - 1500 mm Accuracy: ±0,10 mm scale division value: 0.02 mm internal measurement: from 20.1 mm ( own scale ) beak length: 180 mm with fine adjustment and locking screw in wooden box used, checked! forwarding goods, shipping costs on request ! Dimensions ( wooden box ): 1840 x 300 x 55 mm

Compressed air turbine vibrator, vibrator, external vibrator NICE VIBRATION NCT 55 ( NCT55 ) Working torque: 0,545 cmkg frequency: 11000 - 15760 1/min operating pressure: 2 - 6 bar air consumption: 386 - 918 l/min compressed air connection: 3/8 ( inch ) used, tested ! Dimensions (vibrator, without connectors): 160 x 73 x 100 mm

Pneumatic cylinder ORSTA ND6,3A 125x80 TGL 20744 stroke: 80 mm piston diameter: Ø 125 mm rod diameter: Ø 32 mm rod thread: M20 x 1.5, length: 40 mm nominal pressure: 6.3 kp/cm² ( approx. 6.2 bar ) 2x Flange: 156 x 156 mm per flange 4x threaded hole: M16 x 2.0, depth: 45 mm hole spacing: 120 mm New ! Dimensions: 355 x 156 x 160 mm

Directional control valve ORSTA 10-10.1 - TGL 20705 10-23 .3 - TGL 20705 16.018/1 - TGL 20710 Pn: 10 kp/cm² ( 10 bar ) NW 10 220 V AC 50 Hz used, tested ! Dimensions: 230 x 56 x 80 mm

Safeline Metal Detector / Mettler Toledo- is used- Exterior Dimensions W.: 130 cm, D.: 110 cmSee pictures for details.

Pneumatic cylinder ORSTA ND6,3A 40x160 TGL 20744 stroke: 160 mm piston diameter: Ø 40 mm rod diameter: Ø 13 mm rod thread: M8 x 1.0, length: 20 mm nominal pressure: 6.3 kp/cm² ( approx. 6.2 bar ) 2x Flange: Ø 36 mm / 57 x 57 mm per flange 4x threaded bore: M6 x 1.0, depth: 25 mm hole spacing: 40 mm New ! Dimensions: 315 x 58 x 58 mm

Pneumatic cylinder ORSTA ND6,3A 40x200 TGL 20744 stroke: 200 mm piston diameter: Ø 40 mm rod diameter: Ø 13 mm rod thread: M8 x 1.0, length: 20 mm nominal pressure: 6.3 kp/cm² ( approx. 6.2 bar ) 2x Flange: Ø 36 mm / 57 x 57 mm per flange 4x threaded hole: M6 x 1.0, depth: 25 mm hole spacing: 40 mm New ! Dimensions: 352 x 58 x 58 mm

Pneumatic cylinder, single-acting, spring-returning ORSTA ND6,3A 40x25 TGL 20744 stroke: 200 mm piston diameter: Ø 40 mm rod diameter: Ø 13 mm rod thread: M8 x 1.0, length: 20 mm nominal pressure: 6.3 kp/cm² ( approx. 6.2 bar ) 2x Flange: Ø 36 mm / 57 x 57 mm per flange 4x threaded hole: M6 x 1.0, depth: 25 mm hole spacing: 40 mm New ! Dimensions: 153 x 58 x 58 mm

Pneumatic cylinder ORSTA ND6,3A 40x80 TGL 20744 stroke: 80 mm piston diameter: Ø 40 mm rod diameter: Ø 13 mm rod thread: M8 x 1.0, length: 20 mm nominal pressure: 6.3 kp/cm² ( approx. 6.2 bar ) 2x Flange: Ø 36 mm / 58 x 58 mm per flange 4x threaded hole: M6 x 1.0, depth: 25 mm hole spacing: 40 mm New ! Dimensions: 235 x 58 x 58 mm

Pneumatic cylinder ORSTA ND6,3A 40x100 TGL 20744 stroke: 100 mm piston diameter: Ø 40 mm rod diameter: Ø 13 mm rod thread: M8 x 1.0, length: 20 mm nominal pressure: 6.3 kp/cm² ( approx. 6.2 bar ) 2x Flange: Ø 36 mm / 57 x 57 mm pro flange 4x threaded hole: M6 x 1.0, depth: 25 mm hole spacing: 40 mm New ! Dimensions: 255 x 58 x 58 mm

Pneumatic cylinder ORSTA ND6,3A 25x200 TGL 20744 stroke: 200 mm piston diameter: Ø 25 mm rod diameter: Ø 12 mm rod thread: M6 x 1.0, length: 15 mm nominal pressure: 6.3 kp/cm² ( approx. 6.2 bar ) 2x Flange: Ø 25 mm / 41 x 41 mm per flange 4x threaded hole: M5 x 0.8, depth: 15 mm hole spacing: 28 mm New ! Dimensions: 305 x 41 x 41 mm

Directional control valve ORSTA 6-01.1 - TGL 20705 2x 6-23.4 - TGL 20705 1x 6-38.3 - TGL 20705 2x 16.019/1 - TGL 20710 Pn: 10 kp/cm² ( approx. 10 bar ) NW 6 220 V AC 50 Hz New, with accessories ! Dimensions: 222 x 42 x 80 mm

turning diameter: 280 mm turning length: 380 mm control: FANUC Oi TD Spindle Bore:: 65 mm turning speed range - spindle: 4500 U/min feed range - turret / stepless: 1 - 12000 mm/min rapid traverse: 24/27 m/min : 1 Stück : 12 Stationen tool taper: Direktaufnahme spindle motor: 7,5 / 11 kW x-axis: 260 mm z-axis: 400 mm tailstock quill taper MT: 4 tailstock quill stroke: 100 mm spindle nose: A2-6 spindle bore: 73 mm total power requirement: 30 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2300 x 1850 x 1750 mm Multifunction lathe equipped with 3 axes - CNC control Fanuc CN Oi-TD with Turn Mate - C-axis - Tool turret 12 positions - Rotating tool speed 5000 rpm, 3.7 kW - Tailstock with hydraulic counter-tip CM4 - Chip conveyor - Collet device - Coolant system - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Directional control valve ORSTA 10-01.1 - TGL 20705 2x 10-23.4 - TGL 20705 1x 10-38.3 - TGL 20705 2x 16.018/1 - TGL 20710 Pn: 10 kp/cm² ( approx. 10 bar ) NW 10 220 V AC 50 Hz New ! Dimensions: 395 x 97 x 80 mm

Hydraulic pump BUCHER QX42-032/42-020R Pd: 210 / 210 bar Vg: 032 / 020 cm3/U Shaft: Ø 32 mm flange: Ø 105 mm New ! Dimensions: 400 x 270 x 175 mm

Directional control valve ORSTA 10-01.1 - TGL 20705 2x 10-23.4 - TGL 20705 1x 10-38.3 - TGL 20705 1x 10-40.15 - TGL 20705 2x 16.018/1 - TGL 20710 Pn: 10 kp/cm² ( approx. 10 bar ) NW 10 220 V AC 50 Hz New ! Dimensions: 395 x 97 x 110 mm

Key data: 1500 kN, 750 cm³

Plates 510x400 mm Clamping force 150 t max. injected volume 750 cm³ clear width 440 mm

Directional control valve ORSTA 10-01.1 - TGL 20705 1x 10-23.3 - TGL 20705 1x 10-38.1 - TGL 20705 1x 16.018/1 - TGL 20710 Pn: 10 kp/cm² ( approx. 10 bar ) NW 10 220 V AC 50 Hz New ! Dimensions: 395 x 97 x 80 mm

Directional control valve ORSTA 6-10.1 - TGL 20705 1x 6-23.3 - TGL 20705 1x 6-38.1 - TGL 20705 1x 6-45.15 - TGL 20705 1x 16.018/1 - TGL 20710 Pn: 10 kp/cm² ( approx. 10 bar ) NW 6 220 V AC 50 Hz New ! Dimensions: 200 x 54 x 100 mm

Directional control valve ORSTA 6-10.1 - TGL 20705 1x 6-23.3 - TGL 20705 1x 6-38.1 - TGL 20705 1x 6-45.15 - TGL 20705 Pn: 10 kp/cm² ( approx. 10 bar ) NW 6 New ! Dimensions: 122 x 53 x 64 mm

Directional control valve ORSTA 6-01.1 - TGL 20705 1x 6-23.3 - TGL 20705 1x 6-38.1 - TGL 20705 1x 6-40.10 - TGL 20705 Pn: 10 kp/cm² ( approx. 10 bar ) NW 6 New ! Dimensions: 152 x 53 x 64 mm

Hydraulic motor, oil motor, hydraulic pump -Power/torque: 19.3 Nm/bar -Speed: from 5 to 500 rpm -Max. Pressure: 315 bar -Swallowing volume: 1265 cm³/rev -Dimensions: 500/500/H550 mm -Weight: 246 kg

Directional control valve ORSTA 6-01.1 - TGL 20705 1x 6-23.3 - TGL 20705 1x 6-38.1 - TGL 20705 1x 6-40.15 - TGL 20705 Pn: 10 kp/cm² ( approx. 10 bar ) NW 6 New ! Dimensions: 148 x 53 x 64 mm

Pneumatic roller vibrator, pneumatic unbalance motor, vibration motor, shaker motor, shaker -Motors: unused -Type: R 120 -Working moment: 1200 cmkg -Rated frequency: 10140 to 11780 rpm -Centrifugal force: 6705 to 9100 N -Air consumption: 315 to 768 L/min -Switching level: 86 to 97 dB -Number: 3x motors available -Price: per piece -Weight: 4 kg

Directional control valve ORSTA 6-01.1 - TGL 5410 2x 6-23.4 - TGL 20705 1x 6-38.8 - TGL 20705 1x 6-40.15 - TGL 20705 Pn: 10 kp/cm² ( approx. 10 bar ) NW 6 New ! Dimensions: 178 x 53 x 64 mm

Short cycle press, short cycle press system, panel press, gluing press, veneer press, adhesive press, heating press, molding press, -Pressing area: 3810 x 1600 mm -Manufacturer: Wemhöner, heatable veneer press type VOF2-295/2 -Control: Siemens S5 -Drive: hydraulic -Number of press cylinders: 8 pieces -Pressure pressure: 295 t -Pressure: max. 60 N/cm² -Plate heating: gas burner heat exchanger via thermal oil (max. 130° degrees) -Infeed conveyor belt: 1600 x 5000 mm -Outlet roller conveyor: 1600 x 5000 mm