cm used for sale

Ref. no.: 17195 Hersteller: DEMAG Year of construction: 1996 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 400 x 400 mm Mould height min.: 250 mm Platen size (h x v): 580 x 590 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 3,9 × 1,4 × 1,9 m Machine weight: 3700 kg

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

Very well maintained SLM 280HL 2.0 (dealer demo machine) with approx. 1450 laser hours for sale., Installation: 2018, equipment: HRSH 050 L/W 5kW cooling unit, PSM 100 V3 vibrating screen station, SLM AMC 330 safety vacuum cleaner, BPH 280 handling device, Installation space in mm (x/y/z): 280x280x350, laser power: 400W, build speed: 35 cm3/Hour 35 cm3/Hour, practice layer thickness: 20-100μm, Min. track width / wall thickness: 180µm, Operative beam focus freely selectable: 100µm - 700µm, compressed air requirement: ISO 8573-1, 18l/ bar, Dimensions in mm (w x h x d): 1800 x 1900 (2400) x 1000, Weight in kg: approx. 1000, E-connection / consumption: 400 Volt 3NPE, 32 A, 50/60Hz, 6 KW/h, exposure speed: 15 m / s, Shielding gas consumption in the process: Ar/N2, 2,5l/min, Flood shielding gas consumption: Ar/N2, 1700l/min, mass: Approx. 1000KG Approx. 1000KG, Build chamber in mm  ...

SPECIFICATIONS: Installed power (hydraulic pump): 4 Kw Double pump GR2+GR2 14 cm³+14 cm³ Dimensions: 3500 x 1300 x 2200 mm Output per hour: 100 chairs/h Safety precautions

This injection molding machine from Dr. Boy is in good condition. The machine is from 2022 and has few working hours. – Brand: Dr. Boy – Model: XS – Year of construction: 2022 – Screw diameter: 18 mm – Shot volume: 15.3 cm³ – Closing force: 10 T – Working hours: < 25

clamping force: 800 kN injection volume: 78 cm³ screw diameter: 25 mm platen size: 570 x 552 mm Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN08 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm - Control: CC 90-A0 Injection unit: - Injection volume max.: 78 cm³ - Injection weight max.: 90 g - Screw diameter: 25 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 400 rpm - Injection flow: 87 g/sec - Injection flow (increased): 64 g/sec - Specific injection pressure: 2400 bar - Nozzle stroke:  ...

clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 570 x 552 mm Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN12 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm Injection unit: - Injection volume max.: 154 cm³ - Injection weight max.: 156 g - Screw diameter: 35 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 320 rpm - Delivery flow: 35 g/sec - Injection flow: 148 g/sec - Injection flow (increased): 107 g/sec - Specific injection pressure: 1600 bar ...

Airless and Aircoat mit neuen Packungen - Producer Wagner - Typ. Leopard 35-150 icebreaker - Übersetzung 35:1 - Baujahr 2017 - Wetted parts in stainless steel - Max. Eingangsdruck 8 bar - Flow rate, cm³/double hub 150 - Max. Materialdruck 250 bar - Pneumatische Hochdruckpumpe - Mit Hochdruckfilter - Ansaugschlauch, flexibel - Mit Wandhalterung - Machine number 2017-1179 - Standort: am Lager

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

Three-phase transformer, with rectifier, DC power supply, power supply SCHAD SINTEC ISK-D 10.3 0,25 kVA Prim.: 400 V 3AC ±5 % 50 / 60 Hz sec.: 24 V DC, 10 A IP00 Rectifier: SKD 25/02 spare part for lathe CMB TD35/250 ! used, checked! Dimensions: 365 x 160 x 310 mm

Three-phase transformer, isolation transformer, control transformer, control transformer JURA-ELEKTRONIK JDTUS 14 Art. No. T70.0639.2730 10 kVA Prim.: 400 V 3AC ±7 % sec.: 220 V 3AC, 26.3 A 50 / 60 Hz spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 365 x 160 x 310 mm

Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Control Panel, Machine Control Panel CMB TD35/250 2x Handwheel: PEPPERL+FUCHS Type TRD-J500-RZ Part No.: 15284 spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 485 x 400 x 125 mm

Pressure gauge GAUGE BEIERFELD 0 - 25 kp/cm² ( 0 - 25 bar ) Scale: 25 Mp Accuracy class: 1,,6 Pitch: 0.5 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 Material: Brass, Housing: Aluminium New ! Dimensions: 197 x 160 x 56 mm

Pressure gauge MESSGERÄTEWERK BEIERFELD 0 - 25 kp/cm² ( 0 - 25 bar ) Scale: 60 Mp Accuracy class: 1,,6 Pitch: 0.5 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 Material: Brass, Housing: Aluminum New ! Dimensions: 197 x 160 x 56 mm

Pressure gauge ELEKTRON KARDZHALI, PRESSURE GAUGE VARNA 0 - 0,0 - 0,0 6 kp/cm² ( 0 - 0.6 bar ) Accuracy class: 1.6 graduation: 0.01 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 Material: Brass, Housing: Iron New ! Dimensions: 210 x 162 x 56 mm

Electronic Module, Machine Control NUM S.A. Type 760T 1x Input / Output Module ( E/S ) 1x Expansion Module ( AUTO V3-24K ) 1x Control Module ( AXES V2 ) 1x Memory Module ( MEMOIRE 256/768 ) 1x Processor Module ( PROCES V2 ) with connection cable ! spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions: 485 x 260 x 300 mm

Hydraulic power pack with tank and radiator DUPLOMATIC IBERICA S. A. No. 68 p: 40 kg/cm² ( approx. 39,cm² 2 bar ) V: 13 l/min Tank: approx. 50 l Engine: SIEMENS 1LA5 090-4AA21 1,1 kW 1410 rpm 220 / 380 V 3AC 50 Hz 60 Hz - operation is possible ! IP55 spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 730 x 710 x 520 mm

Ref. no.: 18255 Hersteller: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009

Control Panel, Machine Control Panel CMB TD35/250 Type NUM 750 Monitor: NUM TFT8,4 35008995 Monitor is defective spare part for lathe CMB TD35/250 !, among others used, checked ! Dimensions: 485 x 400 x 125 mm

Control Panel, Machine Control Panel CMB TD35/250 Display Speed: 0 - 6000 rpm Display Current: 0 - 60 A instrument size: 92 x 92 mm spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions: 320 x 210 x 55 mm

73 cms cut off Hydraulic Infrarred security guards Digital program with 100 programs Touch screen Side tables Air table

Servo motor with brake, permanent magnet motor AMK DYNASYN DV5-2-4 DBF 0,69 kW 3000 / 10000 rpm 190 V IP54 Shaft diameter: Ø 19 mm shaft length: 40 mm groove width: 6 mm Flange diameter: Ø 95 / 110 x 110 mm bolt circle diameter: Ø 115 mm hole diameter: Ø 9 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 400 x 115 x 142 mm

Servo motor, permanent magnet motor AMK DYNASYN DW-8-4DF 1,5 kW 2000 rpm 190 V IP54 shaft diameter: Ø 25 mm shaft length: 50 mm groove width: 8 mm Flange diameter: Ø 130 / 143 x 143 mm bolt circle diameter: Ø 165 mm hole diameter: Ø 11.5 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 378 x 147 x 174 mm

Elektromotor AMK AE 8040/4 23 Watt 1400 rpm 380 V 50 Hz IP44 Shaft diameter: Ø 8 mm Shaft length: 28 mm Flange diameter: Ø 86 mm ( housing diameter ) with low-vibration mounting device Spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions (motor only): 140 x 91 x 104 mm

Servo motor, permanent magnet motor, with forced fan AMK DYNASYN DH10-45-4AF 6,5 kW 1300 rpm 190 V IP54 Forced fan: 220 V 0.1 A shaft diameter: Ø 32 mm wavelength: 60 mm V-belt pulley: Diameter: Ø 121 mm, groove width: 2x12 mm Flange diameter: Ø 180 / 190 x 190 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 14.2 mm spare part for lathe CMB TD35/250 ! bearing Motor shaft has noise. Bearing must be replaced! used, checked ! Dimensions: 595 x 196 x 250 mm

Clamping table, clamping plate, milling table, machine table CMB TD 35/250 Clamping surface: 500 x 400 mm < >Slot thickness: 40 mm Groove width: 12 / 18 mm Groove depth: 21 mm Bridge width: 98 / 178 / 98 mm Guide groove: Width: 50 mm, Depth: 18 mm ( bottom ) 5x slotted hole: Ø 12 x 60 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 500 x 400 x 40 mm

Clamping table, clamping plate, milling table, machine table CMB TD 35/250 Clamping area: 550 x 95 mm < br />Plate thickness: 50 mm Groove width: 20 / 31 mm Groove depth: 28 mm Bridge width: 30 / 45 mm Support surface (bottom): 550 x 97 mm hole spacing (mounting screws): 165 mm 4x bore with blind hole: Ø 10.5 / 17 mm, depth: 11 / 11 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 550 x 120 x 78 mm

Oiler, proportional standard mist lubricators FESTO series D LOE-D-MIDI 192576 Operating pressure: 1 - 16 bar Minimum flow rate for lubricator function: 8 l/min Oil capacity: max. 110 cm3 New ! Dimensions: 205 x 55 x 55 mm

-Camera-based code readers -Manufacturer: SICK -Type: ICR845-2E1020 -LED incident light illuminations -Manufacturer: CCS -Type: LDL2-74x30RD-M12 -Control box with control - Manufacturer: SICK -Type: CMC 400 -Cameras and controls come from a large conveyor system -Several cameras available -Price: per piece -Weight: 3.5 kg

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs

Hydraulic power unit ORSTA B.604.263 Discharge pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs

Circuit breaker, circuit breaker CMC Q3C40 three-pole 40 A 690 V 3AC New ! Dimensions: 91 x 74 x 98 mm

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs

Servo motor SANYO DENKI CM92L8-6A 100 V 150 W 7000 - 9000 rpm shaft Ø 12 mm New ! Dimensions 26x14x14 cm

Energy chain CMB TD35/250 Length: 700 mm Cross section ( inside ): 45 x 25 mm Cross section ( outside ): 60 x 45 mm Material: stainless steel, plastic, aluminum ( flanges ) spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions (packaging): 270 x 270 x 65 mm

Gap filter CI, CCCP, UDSSR Type 008?41 p: 63 kg/cm² (approx. 62 bar) Q: 8 l/min for pipeline installation New ! Dimensions: 90 x 85 x 190 mm

Energy chain, cable carrier, closed CMB TD35/250 Length: 1400 mm cross-section ( inside ): 42 x 40 mm cross-section ( outside ): 60 x 53 mm Material: stainless steel, plastic, aluminum ( flanges ) spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions (packaging): 380 x 340 x 65 mm

Pressure gauge ELEKTRON KARDZHALI, PRESSURE GAUGE MOVEMENT VARNA 0 - 0.6 kp/cm² (0 - 0.59 bar) Accuracy class: 1.6 pitch: 0.01 Case diameter: Ø 100 mm connection thread: M20 x 1.5 New ! Dimensions(single pressure gauge): 138 x 100 x 48 mm

Gear motor with brake ORIENTAL MOTOR 5GU12.5KB / 5RK90GU-CMF2 ( 5GU12.5KB/5RK90GU-CMF2 ) 1250 / 1500 RPM 200 V Dimensions 300 x 160 x 120 mm

Pressure gauge ELEKTRON KARDZHALI, PRESSURE GAUGE PLANT VARNA 0 - 10 kp/cm² (0 - 9.8 bar) Accuracy class: 1.6 pitch: 0.2 Case diameter: Ø 100 mm Connection thread: M20 x 1.5 New ! Dimensions(single pressure gauge): 138 x 100 x 48 mm

Hydraulic pump HYDRO RENE LEDUC VDP 040.059435 G 350 bar 40 cm3/U max. 2800 rpm New !

Pressure gauge ELEKTRON KARDZHALI, PRESSURE GAUGE PLANT VARNA 0 - 16 kp/cm² (0 - 15.69 bar) Accuracy class: 1.6 pitch: 0.2 Case diameter: Ø 100 mm Connection thread: M20 x 1.5 New ! Dimensions (single pressure gauge): 138 x 100 x 48 mm

Pressure gauge ELEKTRON KARDZHALI, PRESSURE GAUGE MOVEMENT VARNA 0 - 25 kp/cm² (0 - 24.52 bar) Accuracy class: 1.6 pitch: 0.5 Case diameter: Ø 100 mm Connection thread: M20 x 1.5 New ! Dimensions (single pressure gauge): 138 x 100 x 48 mm

Hydraulic pump with motor BUCHER QX22-006R119 Pd : 125 bar Vg: 6 cm3/U Motor SEW Engine: 2,2 kW 1410 rpm 400 V Dimensions: 780 x 350 x 260 mm

Hydraulic power unit, drive unit REXROTH U 11.0 R 3,8 - 20 P = 150 kp/cm² V = 2,73 cm3 engine: 1,1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm

Hydraulic pump TECHNOMETRA LC 25.01 P ( LC25.01P ) Vg: 105 cm3 Pn: 20 Mpa Shaft: Ø 39 mm Dimensions: 420 x 180 x 195 mm

Hydraulic power unit with air-operated hydraulic pump MAXIMATOR pump: G 15 - 2L ( G15-2L ) drive pressure: max.11 bar P: max. 320 bar Q: 62 cm3 Tank: approx. 100 l used, tested ! Dimensions: 645 x 540 x 955 mm

Hydraulic pump VICKERS VVB032R,FW20 CBW12 Vg: 32 cm3/U p max: 140 bar Shaft: Ø 32 mm Flange: Ø 120 mm Dimensions: 310 x 260 x 220 mm