cm used for sale

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

XEIKON CX-3 Digital Label Press from 2016 5 colours Very nice Xeikon digital label printer from 2016 – CMYK+ special colour Manufacturer: Xeikon Type: CX-3 Year of Production: 2016 Availability: Immediately Print technology Process LED-array-based, dry toner electrophotography Full rotary, variable repeat length Color configuration 5/0 simplex 5th color station for spot color security toner or opaque white Standard color sequence : white (5th), yellow, cyan, magenta, black (sequence can be altered for other applications) Off-the-shelf available: red, green, blue, orange, ExtraMagenta, Clear (uv reflecting), white, MatteSilver and PalladiumSilver In-line spectrophotometer Standard, automatic density control while printing In-line register control Standard, automatic register control while printing Toner Xeikon QA-CH (Cheetah-toner) Addressability 1200 x 3600 dpi with ...

Sale of Moog RKP 80 + Voith internal gear pump. Exact type of lashing pumps: Moog 2518218727 + Voith IPC / 5/50. The Moog pump has 80 cm3 and the Voith pump 50 cm3. The pumps run approx. They've spent 3,000 hours on pure oil, so they're new.

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...

pressure: 110 t punching cross-cut in cmm: stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maximum punching force: 1100 kn Maximum shear force: 1700 kN Punch projection: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down for the flat steel knife Square notcher The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Capacity: 0 t (1) horizontal / (2) vertical: 0   Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Clamping force: 150 to Stroke volume: 201 cm3 Ejector stroke: 150 mm Ejector force: 49 kN Pressure on material: 2218 bar Screw diameter: 40 mm from: 20 rpm up to: 300 rpm Mould heating: 20 kW Screw drive: 30 kW Machine´s weight about: 9000 kg Overall dimensions machine: Length: 5700 mm Width: 1650 mm Height: 2220 mm

automatic baler Manufacturer: PAAL Type: PACOMAT III 50 C Operating hours: approx. 1,750 hours Year of construction: 2014 Specifications: Press force: 485 kN (50 t) Specific pressing force: 6.4 kg/cm² System pressure: 315 bar only free kicks Drive power: 22 kW Total connected load: 92 kW, 175 A Throughput at idle: approx. 285 m³/h Throughput under operating conditions: approx. 125 m³/h Output at 35 kg/m³: approx. 4.4 t/h Capacity at 50 kg/m³: approx. 6.0 t/h Filling opening: 1,200 x 920 mm Duct format: 750 x 1,000 mm (H x W) Oil tank volume: 1,250 ltr. Control: Siemens S7-300 Machine dimensions: approx. 8,000 x 2,000 (4,100) x 2,460 mm (L x W x H) Machine weight: up to approx. 12 t

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

SHUZ TUNG CNC 50 BRM CNC tube and profile bending machine built in 2014 in Taiwan allows for fully automatic, serial production of complex spatial workpieces in 5 axes with simultaneous hole punching. Excellent precision and accuracy of bending are guaranteed by the reliable servo motors used in the machine, which are responsible for realising the main working movements, i.e. bending, rotation and material feed. The rest of the movements are driven by a central hydraulic system with electronic lubrication. The SHUZ TUNG CNC mandrel bending machine is operated via a control panel with an installed CNC controller with the option of saving an unlimited number of programmes. In addition, the automatic servo bending machine is equipped with several bending rolls, a high-quality mandrel and an actuator to support material feed. The 50 BRM automatic CNC mandrel bending machine weighs 3500 kg ...

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

fully automatic baler Manufacturer: BAUER Type: 500 Year of construction: 1993 specifications: Press force: 50 t Specific pressing force: 6.68 kg/cm² Channel format: 680 x 1,100 mm Bale weight: 450 - 550 kg, depending on material and bale length Filling opening: 1,600 x 1,020 mm Filling volume: 1.66 m³ Drive power: 2 x 22 kW Throughput: - Idle approx. 450 m³/h - under operating conditions approx. 200 m³/h Press services at: - 20 to 30 kg/m³ bulk density approx. 4 to 6 t/h - 35 to 50 kg/m³ bulk density approx. 7 to 10 t/h - 60 kg/m³ bulk density approx. 12 t/h - 100 kg/m³ bulk density approx. 18 t/h Machine weight: approx. 21 t Optionally with chain conveyor belt according to pictures. Subject to accuracy of technical data.

Vertical tank made of stainless steel with a useful capacity of 750 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1998 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 750 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 1020 mm Body height 1050 mm

automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.

Code: 0533 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 1/C 3000 - CE Standard Automatic wide belt sander with mobile head 3000 mm for wood, panels in general, plywood, truck beds, camper vans, caravans, prefabricated houses, shipbuilding, aeronautical industry, composite materials and various - CE Standard - Year 2005 Technical data: Working width mm 3000 Max working height mm 100 Min working height mm 2 Variable belt feed speed m/min 5/25 with inverter - Motor Kw 4 Calibrating/sanding steel roller - Diameter mm 400 - Belt development mm 2620 x 3050 - Motor Hp 50 (Kw 37) - Rpm 1465 Front and rear brackets for holding pieces Oscillating blowers for cleaning front and rear belt l/min 2000 Automatic head lifting Rotating blowers for cleaning output panels - 2 suction mouths diameter 160 mm Numerical control Syel for working group management Emergency safety bar Suc ...

Codimag viva 340 waterless offset 8 colors Electrical equipment and control panel. Longitudinal cutting device with 4 knives. Plate bending device for waterless plates Base with register trolley with flexographic printing unit for varnishing including varnish pump and anilox roller (angle 60°, grid width 80L/cm, volume 9 cm³/m²) Magnetic cylinder for Flexowerk Stork screen printing units each with base and register carriage including ink pump and automatic ink level control UV drying 8 statons Make IST, type M40-8x1-MBS-G-Co-CMK-SLC4 printing units à 120 Watt 4 printing units each 160 Wat (printing unit, varnishing unit, 2xscreen printing) Air-cooled spotlight unit including CMK reflector, telescopic slide and SLC stepless power control Hot foil stamping unit with servo drive incl. -1Hot foil stamper -Foil saving circuit -Special base with register trolley -electronic e ...

Parallel lathe NILES DLZ 400 IV Between points: 1000 mm Maxi Ø on bench: 420 mm Maxi Ø over saddle: 225 mm Spindle diameter: Ø 52 mm Spindle speed: from 45 to 2240 RPM 3-jaws chuck Ø 250 mm (interchangeable jaws) Threadings: Metric + Whitworth Tailstock: CM5 Rapid on X Lubricant pump Voltage: 380 V Length: 3000 mm Depth: 1500 mm Total height: 1600 mm Weight: approx 2,5 T

TYPE : G6200 S 190 N8 SP - SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING 8 COLOR, WITH STAUBLI DOBBY 2617 WW : 190CM SERIAL NO. : 1056 ACCESSORIES : CREEL WITH 192 POSITIONS , BY CMG , YOC 2010 DUST SUCTION UNIT 4 FRAMES 4 PREWINDERS IRO ORION BATCHING MOTION

Gas stove with electric ovenMKN type 2163403-02 with 4 burners, 2 large, 2 slightly smaller. Is used and functional. Oven inside Dimensions: W.: 53 cm, D.: 50 cmOutside dimensions W.: 80 cm, D.: 70 cm, H.: 88 cm

LIQUIDATION. Automatic hamburger forming machine, GASER brand, model R2000. SPECIFICATIONS Can be attached to any stuffer (30 mm outer diameter outlet). Place cellophane paper on both sides automatically and cut it in the same way as the hamburger or straight (depending on request). It produces 50 to 75 burgers/minute, depending on the speed of the stuffer and the type of dough. 108 mm round shaped burgers. Weight of the burgers from 70 to 130 grams (thickness adjustable by moving a screw). Consume cellophane coils. Pneumatic operation at 6 Kg/cm2. Air consumption 100 liters/minute. Electrical power 100 watts. Easy to clean. Dimensions: 850 x 580 x 1,300 mm. Machine weight (without conveyor belt): 70 Kg. Constructed of stainless steel. The simplest, most effective and economical technique. The machine is ready to plug in and work with. Burger Former, Hamburger Making  ...

GAS FIRED STEAM BOILER : MAKE : AMF / CALLENS YOC : 10/1995 CAPACITY : 2.240.000 kcal 2605 kw Pressure : 12,24 kg/cm2 12 bar • With a water supply temperature of 100°C, the steam production should be about 4 tons/hour

? Product:? Used? Checked? To gut? Manufacturer: Jako? Type: EKM? Year: 2009? Power supply: 400 V, 0.1 kw? Outside dimensions W.: 54 cm, D.: approx. 40 cm, H.: 63 cmSee pictures for details.

The Benhil Microfix rationalises the processing and packaging of cold store butter. The machine reduces the time it takes to defrost butter, it improves the quality of the butter by creating the finest water dispersion and improves the spreadability of the butter. Microfix 8471 butter homogeniser Capacity: up to 1.400 Kgs/Hour Rotor motor power: 20 HP Feed worms motor: 3.8 HP Manual included Length: 200 cms Width: 90 cms Height: 170 cms Weight: Approx. 900 Kg Made in : Germany

Sheeting machine Seewer Rondo SSO 62Manufacturer : Seewer RondoType : SSO 62Belt length right : W 130cm D: 62cmBand length left : W 160cm D: 62cmTotal, maximum dimensions WxDxH approx.: 305 x 115 x 120 cmmovable, with brakeswith safety switchDetails see picture

Feeding puller DAUB Heuft Hein thermal oil stovePuller with trolley DAUB thermal oil stoveTotal external dimensions: W.: 159 cm , D.: 89 cm , H.: 196 cmPull-off dimensions: W.: 75 cm , D.: 158 cm , H.: 4 cm4 pieces we have in stockDetails see picture

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 20-1/1 Electric model with 20 shelves GN 1/1 New is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The super-fast intermediate and self-cleaning keep your device squeaky clean. It is a young used combi steamer from 01/2023. The RRP is € 25,520 net Availability: available directly from stock in week 09/2024 The indicated price is gross incl. 19% VAT. Service: We would be happy to provide you with a certified Rational customer service from master craftsmen, within a radius of approx. 100 kilometres from our location (postal code: 35418) Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether S ...

This is a CM(P) 61 combi steamer from the premium manufacturer Rational, in electric version, built in 2018. The device has undergone an extensive inspection in our in-house workshop and is fully functional. Specifications: • W x D x H: approx. 847 x 776 x 782 mm • Power supply: 400 V / kW: 11.0 / 50-60 Hz • Capacity: 5x1/1 GN • Weight: approx. 103 kg • Serial number: E61MI18072681386 • Year of construction: 2018 Used, fully functional. 6-month warranty on electrical parts. Warranty condition: Please note that devices with a three-phase connection (400V), water connection and/or gas-powered devices may only be connected by a specialist company certified by the manufacturer! Only the submission of the commissioning protocol entitles the holder to warranty claims The price quoted is net plus 19% VAT. Service: We are happy to advise you on all types of device ...

Deck oven- used- bakery condition- manufacturer: quail- Type: Piccolo 1-5- 5 shelves- per shelf 1x 60x80 cm trays or 2x 60x40 cm trays- with proofing cabinet- Control: DMS 2 Master 100 Timer- Year of manufacture: 08/2009- electric. Connected load: 26.9 kW- Voltage: 400V AC/3Ph/N/PE/50 Hz- External dimensions W.: 98 cm, D.: 132 cm, D.: 208 cm- Floors Dimensions W.: 60 cm, D.: 86 cm, H.: 16.5 cmSee pictures for details.

eference ID PP-40000 Category Label Printer Manufacturer - Model 3300 Year Built 2015 Color 4 Impression- Working Hours - Speed 19.2 m/min Max. Size 200 - 330 mm Min. Size - Condition Good Location Europe Availability - Machine Description process: LED-array-based, dry toner electrophotography full rotary operation color configuration: 5/0 simplex In-line density control: standard in-line register control: standard toner: Xeikon FA toner, Pantone® calibrated (pending) - CMYK, spot colors, opaque white or security toner pre-printed stock functionality: standard web-fed: SA label (paper, PP, PET, vinyl, co-extruded film), unsupported film, paperboard, paper media width: 200 - 330 mm (7.9" - 13.0") media weight: 40 - 350 gsm (27 lb text to 122 lb cover) Media Caliper: 40 - 350 μm (1.6 mil - 13.5 mil) Web Speed: 19.2 m/min (32.0 cm/s; 63.0 ft/min) (Paperboard 9.6 ...

Reference ID PP-39952 Category 6-Colors Manufacturer Heidelberg Model CD 102-6+LX2 Year Built 2015 Color 6 Impression 118 Working Hours - Speed 15000 sheets/h Max. Size 710 x 1020 mm Min. Size 340 x 480 mm Condition Good Location Europe Availability Immediately Machine Description 6 colors and varnish Prinect Press Center Compact - control console Preset Plus feeder All cylinders use new technology of special compact bearings Digitally controlled Alcolor thin-film dampening unit Chambered blade system with features that enable replacing anilox rollers with One Anilox roller: 10 cm3/m2 (120 lines/cm), Chrome-plated blanket cylinder with a 3.2 mm undercut, Chrome-plated double-diameter pressure cylinder, Preset Plus X2 delivery Device for automatic washing of rubber blankets (brush system), pressure cylinders (brush system) and inking rollers CombiStar Compact Dr ...

Immersion bath for sheet metal cleaning? Product? Manufacturer: unknown? Condition: used, not tested, baker's condition? Material: stainless steel? Suitable for cleaning sheet metal? On wheels, drivable? Inside Dimensions: W.: 130 cm, D.: 49 cm, H.: 80 cm? Outside Dimensions: W.: 141 cm, D.: 77 cm, H.: 107 cmSee pictures for details.

Kemper Kneading Machines Kettle 90 cmW90cm D 48cm2 pieces we have in stockBakery condition Details see picture

Welding cell from Reis for sale due to conversion to laser cell Inspection possible Test welding possible still in operation technical data - Year of construction 2002 - Welding unit Fronius VR7000-CMT 4R/G/W/F - second hose package available - software version V2.0 19 05.1999 - Robiarm sturdy design - 2 turntables /4 welding stations - Contact for service and maintenance can be arranged

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Pressure on the material: 2380 bars CLOSING UNIT Closing force: 2500 kN Mold thickness Mini / Max: 300 mm Passage between columns: 630 x 630 mm EQUIPMENT EUROMAP robot socket 2 Cores

Deck shop oven continuous oven quail PiccoloProduct description:- used- Manufacturer: Wachtel- Type: Piccolo 1-5- Control: DMS 3 Master Timer- Year of manufacture: 04/2011- elek. Connected load: 23.4 kW- Voltage: 400V AC/3Ph/N/PE/50 Hz- Continuous oven with proofer- Shelves Dimensions W.: 63 cm, D.: 90 cm, H.: 1x 20 cm, 4x 16 cm- External dimensions W.: 103 cm, D.: 220 cm, H.: 237 cmSee pictures for details.

pressure: 11 t punching cross-cut in cmm: diverse stroke: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic punching press With 3 punching tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

 Decking machine Drautz RD 100 Manufacturer : DrautzType : RD 100Technical data:Connected loads: 0.6 KW 220/380 VMaisle at rest without extractor, infeed conveyor folded downLength: 70 cmWidth: 85 cmHeight: 112 cmLength in working mode depending on fume hoodLength: approx. 350 cmWidth: 85 cmHeight: 112 cmTank volume: 35 lSee pictureShipping costs please inquire

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Deck Oven Bakery Oven Continuous Oven Quail Piccolo 1-5Product Description:- Used- Bakery Condition- Manufacturer: Wachtel- Type: Piccolo 1-5- Control: DMS 3 Master Timer- Year of Construction: 04/2011- Electric. Connected load: 23.4 kW- Voltage: 400V AC/3Ph/N/PE/50 Hz- with proofer- can be worked from both sides- Floors Dimensions W.: 63 cm, D.: 90 cm, H.: 1x 20 cm, 4x 16 cm- Outside dimensions W.: 103 cm, D.: 220 cm, H.: 237 cmSee pictures for details.

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Pressure on the material: 2426 bars LOSING UNIT Closing force: 3300 kN Opening stroke: 675 mm Mold thickness Mini / Max: 330/710 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Pressure on the material: 2040 bars CLOSING UNIT Mini /Max Mold Thickness: 300-650 mm Passage between columns: 570 x 570 mm

Screw diameter: 28 mm Calculated injection volume: 92 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure on the material: 1500 bars Plastification capacity PS: Kg/h Screw speed: 300 RPM Hydraulic motor torque: Nm Hydraulic motor power: HP Nb Temperature zones: 3 N

Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Bale size: 770x600x500 mm Bale weight: - Power supply: 400 V/4 kW Year of construction: 1997 Productivity: - Price: on request

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.