closed used for sale

Electricity: Single phase 230v / 5kVa / fuse 25 A / wires 4 mm 50/60 hz The electricity consumption for an 8 hours shift is approximately 2500W x 8h = 20kWh. Cooling water: Since the cooling unit (stainless steel) is a closed water-circuit, there is no water consumption (after a one-time fill). Minimum pressure: 1 bar (15psi) Maximum pressure: 3 bar (45psi) Temperature: between 13°C and 18°C Quality: lime free and reusable Inlet Connection: inch Outlet Connection: inch Compressed Air: Typical consumption of compressed air is 200 Nm / h (120 cfm), with a maximum consumption of 450 Nm / h (300 cfm). Minimum pressure: 6 bar (90 psi) Maximum pressure: 10 bar (145 psi) Quality: iso 8573.1 air quality standard Connection: 1.5 inch

General SKU394U1132 LocationBarneveld MakeAlthammer No.TA1146209 Year of construction2014 Pressure Working pressure0.49 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume6000 Ltr. Pressure0.49 Bar Vacuumcheck Specified Features - Vertical tank Closed vertical tankcheck Notified bodyTüV Capacitybruto 7280 ltr, (netto 6000 Ltr.) Vessel sizesDia. 1800x2580 mm Dished topcheck Manholecheck DN600 Top connectionscheck DN150,DN100, DN40 Outletcheck DN100 Max. temperature-40ºC/+150ºC Internal heating spiralcheck 2,0 kW (400Volt, Ex) Max. temperature0/+70°C MaterialStainless steel 1.4404 (316L) Information Mounted on legscheck Floorspace1,8 x 2,1 m Total height3,85 m Weight1550 kg ATEX compatiblecheckVertical tanksAlthammerTanks > Vertical tanksBrand > Althammer What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

General SKU394U1131 LocationBarneveld MakeAlthammer No.TA1146210 Year of construction2014 Pressure Working pressure0.49 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume6000 Ltr. Pressure0.49 Bar Vacuumcheck Specified Features - Vertical tank MaterialStainless steel 1.4404 (316L) Closed vertical tankcheck Notified bodyTüV Capacitybruto 7280 ltr, (netto 6000 Ltr.) Vessel sizesDia. 1800x2580 mm Dished topcheck Dished bottomcheck Manholecheck DN600 Top connectionscheckDN150,DN100, DN40 Outletcheck DN100 Max. temperature-40ºC/+150ºC Internal heating spiralcheck 2,0 kW (400 Volt, Ex) Max. temperature0/+70°C Information Mounted on legscheck Floorspace1,8 x 1,8 m Total height3,83 m ATEX compatiblecheckVertical tanksAlthammerTanks > Vertical tanksBrand > Althammer What you can expect from Foeth: -- Machine is in working condition -- At a r ...

General SKU211W133 LocationBarneveld MakeFryma TypeVME250 No.F70.6085/6 Year of construction1982 Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume250 Ltr. Motor5.5 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity250 Ltr. Vessel sizesDia. 830x800 mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionsDia. 32 mm (2x) OutletDia. 50 mm, 40 mm, 20 mm With jacketcheck 46Ltr. Max. temperature138°C With gate type stirrercheck witch scraper 1,5kW, 220/380Volt, 1400/20 rpm With dissolver stirrercheck 5,5 kW, 380Volt, 1440rpm With homogenisercheck Motor5,5 kW, 380Volt, 2885 rpm MaterialStainless steel 1.4401 (316) Information With switchgearcheck Total height2,5 m Weight2100 kg Floorspace3x1,5 m Extra Specificationshis processing vessel is equipped with, among ot ...

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

sheet width: 2520 mm plate thickness: 15.0 mm pre-bending capacity: 12.0 mm upper roll diameter: Ø 295 mm lower roll diameter: Ø 295 mm bending speed: 5.2 m/min work height max.: 1200 mm total power requirement: 15.0 kW weight of the machine ca.: 10900 kg. range L-W-H: 3250 x 2100 x 1700 mm Furnishing: - robust electro-hydraulic 3-roller round bending machine - electro-hydraulic folding storage for removing closed pipes - swiveling control unit, front right - Machine is designed for cone bending with parallel rollers max. bending strength at 2.500 mm .. 7.0 mm steel - electro-hydraulic delivery rollers - electro-hydraulic rotating/rolling movement - Digital position display of the rollers - hardened rollers SAE 1050 CK 45 - Connection cable + plug - original instruction manual + plans Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9401271 The  ...

Key data: 600 mm, 450 mm, 450 mm

Hermle C 600 V, Built in 2005, Control Heidenhain iTNC 530, Travel X/Y/Z 600/450/450 mm, Spindle speed up to 16,000 rpm, Recording HSK 63, Ww 30 speed, rigid table 800 x 465 mm, electr. Handwheel 3D touch probe, Heat compensation, coolant device, Chip pan, closed canopy,

Semi-hermetic refrigeration compressor Bitzer 6FE-40Y-40P Ecoline. Comes from a closed real market, was probably delivered just before closing. Still packed on pallet. Original price approx. 8000,- net.

Key data: 650 mm, 1300 mm, 1 U/min

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

General SKU391U1101 LocationBarneveld MakeEsco-Labor TypeEL1 (glas) No.635/1 Year of construction1993 Pressure Vacuum possiblecheck Main Features MaterialGlass Volume1 Ltr. Motor0.75 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity 1 liter Vessel sizesDia. 120 mm x 150 mm Dished bottomcheck Flat top sidecheck Top connectionscheck Outletcheck With jacketcheck With anchor stirrercheck Motor65 W (3500 rpm) Speed mixing shaftmax 540 rpm With homogenisercheck Motor750 W (2800 rpm) MaterialGlass, Stainless steel Information Mounted on legscheck With switchgearcheck Weight40 kg Floorspace1 x 0,5 m Total height0,75 mProcessing vesselsEsco LaborProcessing vessels > Processing vesselsBrand > Esco Labor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any  ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

SINGLE SHAFT SHREDDERS SPECIAL FOR PLASTIC SCRAPS, form 600 mm to 2.000 mm wide rotor., Adjustable counter-knives, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti-vibration, Machine prepared for discharge by conveyor belt, Bolted and hardened rotor shaft on gear box side (ant ...

Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Sp ...

Manufacturer : Stephan Model: UM44 Year : 2001 Type : Cutter Application: mixing, reducing, cutting, kneading Total volume: 44 L Useful volume: max. 35 L Max. temperature: 95?C Drain: manual through lid or tilting. Power: 2.2 / 4 / 5.5 kW Dimensions (closed): 525 x 800 x 1200 Display: T?C / Time / Speed Documentation available.

Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop devi ...

Availability: as of now Condition: fully functional Performance/Speed: 40 cartons per minute It is an inline machine that closes the top flaps and lids of boxes that have been previously filled. The CLI closing machine is NOT equipped with a glue unit since the box was closed with a hook.

Stainless steel trolley for trays 60 x 80 3 sides closed front with door Cabinet mobile Used appliance cleaned More TOP stainless steel furniture in stock!

Simple proofer / heating oven Model: Fermentation mobile 4060 longitudinal Thermal double glass door with soft closed LED easy control with timer Temperature adjustable from 30 to 90°C Humidity adjustable from 60 to 95% Stainless steel, convection Capacity: 20 trays 400x600 mm lengthwise LED Lighting Connection 230 V, 2.7 kW New device, mobile Weight: 166 kg 3/4 inch water connection Dimensions: 650 x 875 x 2020 mm, WxDxH with 12 months warranty Option: 60x40 transverse rack Brita Filter Many more TOP bakery machines in stock!

DMS DSE141 Flake Ice Maker used Production in 24h approx. 135kg Power: 510W Voltage: 230V Refrigerant: R449a Year of construction: 2018 Weight: 128kg Appliance comes from a real market, which has been closed and is supplied with descaler Very good condition, should still be cleaned thoroughly before use Video about test run and more pictures available

Hobart AMXS-10A hood dishwasher used, from real market, which was closed. Machine is untested and should be thoroughly cleaned before use.

CNC milling machine ADF 0230Pro is designed for high-speed cutting and milling of aluminum profiles and any other non-ferrous metals. All-welded frame of the machine, with vibro annealing Fully enclosed and protected working area, visual contact with the cutting area • Processing zone X, Y, mm - 3003200 • Z axis stroke, mm - 240 • Fixation of the workpiece – Pneumatic clamps – movable along the guides, 4 pcs. • Feed mechanisms - helical rack along the X and Y axis mod. 1.25, ball screw gear 2005 – Z • Drives of linear movements - Servo motor, 750 W • Positioning accuracy, mm – 0.05 • Spindle – 7.5-9 kW air cooling • Automatic tool change function, 6 tool holders - ISO30 • Professional control, NC Studio V15 (Lambda-4S control board, increased processing performance) • Planetary gearbox • Spindle revolutions, rpm - up to 24,000 • Collet  ...

General SKU354T1395 LocationBarneveld MakeUnknown (missing type plate) Year of constructionunknown Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume400 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity400 ltr Vessel sizesDia: 800x1300 mm With covercheck 720x320mm Conical bottomcheck Top connectionssmall SIP connection Outlet50 mm With jacketcheck Without motorcheck MaterialStainless steel 1.4429 (316 LN) Information Mounted on legscheck Floorspace1,1x1,1 m Total height1,8 m Weight340kgVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...

- Demonstration machine - Frame and work table made of stainless steel - Liquid circuit for continuous use up to 90⁰C - Filling head fully closed by security glasses,  - Automated cycle start, automated tap removal, automated capping - Multifunctional coloured display, with touchscreen - Supply voltage: AC220V/50Hz±10% - complies with the Machinery Directive 2006/42/EC Video: https://www.youtube/watch?v=BDoyMhHtzIg Capacity depends on bag type 3 l bag – approx. 400/420 per hour 5 l bag – approx. 345/370 per hour 10 l bag – approx. 260/295 per hour  15 l bag – approx. 210/245 per hour 20 l bag – approx. 175/210 per hour More then 300 machines new and second hand on our seema .de

Mohrbach lid closer Each box has to be closed before transportation. Our lid closers are the perfect completion of your packaging line. Precision, flexibility and reliability, these are the demands at lid closing. The lid has to be in exact position, a multitude of closing features is required and at the same time the lid closer has to work efficiently in production. We understood. Depending on the application, we offer the following working principles: More then 300 machines new and second hand on our seema .de

Aluminium angled conveyor belt incl. substructure horizontal area 1,500mm Rising area 2,100mm Angle in bend 35° Feed height: 200mm Discharge height 1,500mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm Centrally welded T-40 cleats - approx. 400mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm Accessories: Design for the suspension of the overbelt magnetic separator Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300 ...

Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...

Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm (customizable) Rising area 5,000mm (customizable) Angle in bend 35, 40 or 45° Feed height: horizontal (individual) Drop height individually adjustable Construction: height-adjustable (to be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Propulsion: Motor 1.1KW ( adjustable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 cleats - 400mm pitch 2-ply particularly transversely stable Permanently mounted overbelt magnetic  ...

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 2z2p7f Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy) tieflochbohrmaschine, taradeuse trous profonds

Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.

Permanent Overbelt Magnetic Separator TYPE DMPM800 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite mag ...

Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Permanent Overbelt Magnetic Separator TYPE DMPM1200 1.800 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Multilayer filter Manufacturer : Didier Filtertechnik GmbH Eisenberg Capacity: 170 liters Technical data : Stainless steel filter Double Coat Operating pressure interior 6 bar Indoor operating temperature 200 °C Interior capacity 170 liters Operating pressure double jacket 6 bar Operating temperature double jacket 200 °C Capacity double jacket 12 liters Equipment: closed system, complete emptying, hydraulic pressure of the filter layers Throughput from 1 to 10 m³/h Filter area from 0.28 m² to 2.8 m²

Description: rated power: 5,5 kW air flow: 800 l/m working hours: approx. 3297 hrs. working hours under load: approx. 1029 hrs. max.working pressure: 8.5 bars time left to regular maintenance: approx. 3000 hrs. regulary maintained service manual: unavailable  , energy-saving performance the efficiency of a machine depends on the total costs incurred throughout the equipment’s entire service life with compressors, energy costs account for the lion’s share of total expenditure KAESER therefore designed its SX series compressors with optimum energy efficiency in mind. refinements to the energy-saving SIGMA PROFILE airend rotors and the use of premium efficiency IE3 motors have significantly contributed to the increased perfor mance of these versatile compressors the addition of the SIGMA CONTROL BASIC internal controller and KAESER’s unique cooling system have help ...

Cutting machine from roll to sheet. Technical details Model: FMHZ-400A Power voltage: 220V / 1.2 kw Cutting length: 0.1----- 9999.9mm Cutting width: 0.1 -----400mm Cutting speed: 36m/minute max. Cutter material： SKD11 Bearing: Imported SOO6Z Panel material: Stainless steel Feed roller: PUR, 48mm diameter, plastic hardness upper 35° and lower 75° Cutter motor: Reducer motor 250W Feeding motor： Stepping closed loop motor (high accuracy and less error) Rear feeding motor: speed regulating motor Double pull rod cutting mode Spring gear simple brake Feeding bearing: ≤130KG Unwinding diameter: 40≤OD≤1000mm Weight: around 200KGS Dimension: 2850(L ) x 980(W ) x 10500 mm(H) Machine is as good as new. China Flyingman. It can be seen running and tested any time. Attached some photos and video.

Product: Mung bean seedlings, Entry temperature product: 10 – 15° C, Initial product temperature: 80 – 85° C, Perfomance: 1,000kg/hour, Determination: Blancheur is for the process of thermal treatment of vegetables, and fruit definitely, Working principle:, The product is fed in by the operator. The operator ensures an even, Distribution on the band. Blanching is done by spraying with warm water, Connection of the required belt speed. To maintain and improve the, To ensure the quality of the water, the circulating water is permanently cleaned using a stainless steel filter sieve., Technical specifications:, Total length: approx. 5,000 mm, Height: approximately 2,500 mm, Width: approx. 1,500 mm, Band width: 800 mm, Performance: up to 1 000 kg / h, Drive: 1.5 kW, Steam consumption: approx. 150 - 250 kg/t product, Blancheur consists of the following components:, · modular transportin ...

automatic sheet metal storage tower, FMG, – used - : Price from location: only 59.500.-€ (net) plus dismantling etc.! Dismantling: at the expense of customers (building must be opened and closed) Manufacturer: FMG Type: GBLK 15/3ß Year of Make: 2007 Number of storage locations: 333 pieces Load capacity per cassette: max. 3,000kg Number of towers: 6 pieces Total storage capacity: 999,000kg Stations: 4 (another 2 were planned) Speed: 16m /min. Condition: good Available from: immediately Location: Switzerland

Grinder Mill with Blades for Sale Brand: Prat Cutting Chamber: 500x320 mm Closed Rotor Without: Motor, Electrical Panel and Hopper For more details or to make an enquiry, please contact us.

General SKU391U1097 LocationBarneveld MakeFryma TypeVME-20/C No.47818/92 Year of construction1998 Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume37 Ltr. Motor5.5 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity37 Ltr. Vessel sizesDia. 360 x 400 mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionsDia. 20mm Outlet20 mm With jacketcheck volume 6 Ltr. Max. temperature120°C With anchor stirrercheck with crapers Motor1,1/ 1,4 kW, 230/400 volt Speed mixing shaft39/78 rpm With homogenisercheck Motor5.5 kW, 380 volt, 2880 rpm Information With switchgearcheck Total height2,0 m Weight950 kg CEcheck Floorspace1,90 x 0,90 m Extra SpecificationsMounted on wheels. hydraulic unit for lifting vessel. v ...

General SKU297N387 LocationBarneveld Makeunknown, manufacturing tag is missing Main Features MaterialStainless steel Volume10 Ltr. Motor0.75 KW Specified Features - Stirring vessel With covercheck With jacketcheck With motor0,75 KW, 2220/380 Volt Stirring vessels MaterialStainless steel 1.4552, Stainless steel 1.4829 Closed stirring vesselcheck Capacity10 l Vessel sizesdia.240x200mm Dished bottomcheck Flat top sidecheck Top connectionscheck With jacketcheck Half coil jacketedcheck Max. temperature300°C With anchor stirrercheck Motor0,75 kW (380 V, 174 rpm) Speed mixing shaft85 -175- 350 rpm Information Mounted on framecheck With switchcheck Floorspace1,0 x 0,8 m Total height1,4 m Weight250 kgStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

General SKU297N386 LocationBarneveld Makeunknown, manufacturing tag is missing Main Features MaterialStainless steel Volume10 Ltr. Motor0.75 KW Specified Features - Stirring vessel MaterialStainless steel 1.4552, Stainless steel 1.4829 Closed stirring vesselcheck Capacity10 l Vessel sizesdia.240mm x200mm Dished bottomcheck With covercheck Top connectionscheck Half coil jacketedcheck Max. temperature300°C With anchor stirrercheck Motor0,75 kW (380 V, 174 rpm) Speed mixing shaft85 - 174 - 350 Information Mounted on framecheck With switchcheck Floor space1,0 x 0,8 m Total height1,4 m Weight250 kg Extra Specificationswith electric heatingStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

Description: Working width: 15-350/900 mm Maximum working length: 2500 mm Maximum milling tools diameter: 160 mm Maximum milling tools height: 180 mm Shaft diameter: 35 mm Feeding speed: 1 - 15 m/min Working inclination: 0° - 10° Milling motors power: 7.5 Hp Abrasive belt motors power: 4 Hp INCLUDED: CLOSED CABIN ON 3 SIDES, WITHOUT CEILING serial number: 1,498, Approx. Onsite Dimension. (l x w x h): 9,600 x 4,000 x 2,400 mm, weight approx.: 6,000 kg

General SKU233W252 LocationBarneveld MakeDürr TypeN0850 0043 No.P702 278-26 Year of construction2005 Main Features MaterialStainless steel Volume1000 Ltr. Motor0.55 KW Specified Features - Stirring vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselcheck Capacity1075 l (netto 1000 Ltr.) Vessel sizesDia. 1300 x 950 mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionscheck Outletcheck With propellor stirrercheck Motor0,55 kW (380 V, 1410 rpm) Speed mixing shaft151 rpm Information Mounted on legscheck With switchcheck Weight350 kg CEcheck Floorspace1,30 x 1,30 m Total height2,05 mStirring vesselsDürrStirring vessels > Stirring vesselsBrand > Dürr What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to i ...

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

- length of the conveyor when closed : mm. 800 - length of the conveyor when completely open : mm. 3000 - width : mm. 500 - standard working height : mm. 620/900 - metal wheels Ø mm. 48 - castors Ø mm. 80 with brake - stop ending device - connecting plates More then 300 machines new and second hand on our seema .de

The kit includes: 1) 2-station steel strip 2) Base for Microsart® @ filter 250 funnels 3) Fluid diaphragm pump - Liquiport 4) Silicone hose for pump 2-STATION FILTRATION APPARATUS Producer: SARTORIUS Catalog number: A / 447 / S / 2.01 Year of production / purchase: 2017 Current condition: new, unused PERISTALTIC PUMP Producer: KNF FLODOS AG Catalog number: E / 458 / O / 2.01 Year of production / purchase: 2017 Current condition: practically unused (like new) Description: The pump is used for pumping neutral and aggressive media. The parts in contact with the medium are made of chemical-resistant materials: PP pump head, PTFE-coated diaphragms, FFPM valves. Pressing power adjustable by a knob with LED indication (range 10-100%). Self-priming. They do not require maintenance. The offered equipment was purchased in an accredited laboratory, which was closed and due t ...