We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,887 used machines on RESALE, but how to find them? Machine Search
used
PU timing belt, flat timing belt, timing belt, 3 pieces ATOTECH SYNCHROFLEX AT10/1700 length: 1700 mm 1x width: 25 mm 2x width: 32 mm profile: AT10 pitch: 10 mm tooth width: 7. tooth width: 7.7.00 2 mm Tooth height: 2.5 mm Material: PU ( polyurethane ), closed made New ! Dimensions( packaging ): 250 x 250 x 150 mm
used
PU timing belt, flat timing belt, timing belt, 4 pieces ATOTECH SYNCHROFLEX AT10/810 length: 810 mm 1x width: 16 mm 3x width: 20 mm profile: AT10 pitch: 10 mm tooth width: 7,7,00 mm 2 mm Tooth height: 2.5 mm Material: PU ( polyurethane ), closed made New ! Dimensions( packaging ): 200 x 200 x 50 mm
used
Timing belt, flat timing belt, 2 pieces PAGUS AT10/1700 length: 1700 mm width: 32 mm profile: AT10 pitch: 10 mm tooth width: 7.2 mm tooth height: 2.5 mm closed New Dimensions( Packaging ): 200 x 200 x 50 mm
new
1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...
used
Suction control valve, control valve, normally closed, pneumatically controlled HOERBIGER HDKG160 23-561582-1200 Control cylinder: ZAED40 2323 -559795 Pipe inner diameter (inlet): 160 mm Pipe outer diameter (inlet): 200 mm Pipe inner diameter (outlet): 200 mm Flange diameter (outlet): Ø 380 mm New ! Dimensions: 560 x 440 x 380 mm
used
Metal diaphragm valve, pneumatically actuated, closed at rest GEMÜ Type 695 25D 17345E11/N 88260119-00 DN25 PN16 Installation dimensions: 120 mm Control pressure: 5,5 - 7.0 bar valve body material: stainless steel (1.4435) diaphragm material: PTFE New ! Dimensions ( valve ): 130 x 130 x 180 mm Dimensions ( packaging ): 220 x 175 x 130 mm
used
Plastic diaphragm valve, pneumatically actuated, closed at rest GEMÜ Type 690 15D 7715E11/N 88250713-00 DN15 PN10 Installation dimension: 110 mm Control pressure: 5,110 mmbr /br /Control pressure: 5,5 - 7.0 bar valve body material: PP diaphragm material: PTFE New ! Dimensions ( valve ): 130 x 130 x 180 mm Dimensions ( packaging ): 220 x 175 x 130 mm
used
Metal diaphragm valve, pneumatically actuated, closed at rest GEMÜ Type 695 25D 17345E11/N 88260119-00 DN25 PN16 Installation dimensions: 120 mm Control pressure: 5,5 - 7.0 bar valve body material: stainless steel (1.4435) diaphragm material: PTFE New ! Dimensions ( valve ): 130 x 130 x 180 mm Dimensions ( packaging ): 180 x 175 x 115 mm
used
Metal diaphragm valve, pneumatically actuated, closed at rest GEMÜ Type 615 15D 17345211/N 88066737-00 DN15 PN16 Installation dimensions: 110 mm Control pressure: 5,0 - 7.0 bar Valve body material: stainless steel (1.4435) diaphragm material: PTFE New ! Dimensions ( valve ): 110 x 70 x 105 mm Dimensions ( packaging ): 150 x 115 x 70 mm
used
Metal diaphragm valve, pneumatically actuated, closed at rest GEMÜ Type 615 15D 17345211/N 88066737-00 DN15 PN16 Installation dimensions: 110 mm Control pressure: 5,0 - 7.0 bar Valve body material: stainless steel (1.4435) diaphragm material: PTFE New, with documents ! Dimensions ( valve ): 110 x 70 x 105 mm Dimensions ( packaging ): 150 x 115 x 70 mm
used
Vacuum valve, vacuum angle valve VAT 24436-QA41-BCF1 PLV63011 nominal diameter: DN 63 ( 2 1/2 ) Pressure range: 1•10-7 mbar - 4.0 bar (abs) drive: pneumatic actuator with position detector with control valve, single-acting, spring-closed approx. 0.4 m Connection cable material (valve body): Aluminium used, tested ! Dimensions: 215 x 205 x 125 mm
used
Plastic diaphragm valve, pneumatically actuated GEMÜ DN65 DA75 PN10 Installation dimensions: 305 mm closed in rest position used, tested ! Dimensions: 420 x 305 x 260 mm
new
1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...
used
SEnergie CHP G 4.12 TI Electricity and heat generators from 2009 with 64,692 operating hours, complete, closed unit in good condition 1 available 50 KWel x 1,500 rpm, 400 V/50 Hz AC synchronous generator Leroy Somer LSA 43.2L8 C 6/4 with 63 KVA
used
faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm Control: Siemens 840 D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Equipment: CNC control Siemens Sinumerik 840 D Direct measuring system C-axis with extension of the workpiece measurement Hydrostatic guidance of the linear axes Workpiece measurement Tool measurement Tool and process monitoring ARTIS CTM system Workroom surveillance with video camera (at the support) Processing heads with automatic tool clamping UWFK 500 Nm, +/- 90° manually pivotable Various tool holders, type 300.2 Tool magazine 24 to 72 Platu magazine pick-up plate Loading crane for the tool magazine, load capacity 500 kg Loading device with HSK, capto-, KM tool holder Machine protection device Automatic cover of the chip chute Working area protection completely closed Preparation for installing a ...
used
Grinding wheel dresser, swivelling with angle adjustment Dressing diamond for surface grinding machine Diamond dressing device for grinding wheels Manufacturer: ABA Werke Aschaffenburg Working stroke: 28 mm Diamond mounting hole: 8 mm Angular rotation on the base plate: +/- 90 Base plate: 145 x 145 mm Center height: 115 mm- Reducing sleeve in the mounting hole 6 mm to 8 mm- without dressing diamond Closed height: 140 mm Net weight: 9.6 kg very good condition; used
new
turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...
used
Related document 3v-cogeim-plan-drawing.jpeg Technical description 316L stainless steel Closed cartridge filter Working pressure : -1 / +6 Bar. Working temperature : -10 / +140 ?C Capacity : 1130 L Atex unit : Ex II 2G IIB Equipments on the equipment : Input for level indicator Wash nozzles x 16 Wash balls x 2 Top air wash nozzles with Novaseptic Valve Membrane X3 Window x 2 Filter Cartridges ?5 ?m? x 12
new
turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...
used
Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: Witt & Sohn, mushroom hood type PK wd 500 x black. vz -Hood opening: can be closed mechanically, hand wheel -Bolt circle Ø 550 x 12 mm -Number: 2x hood available -Price per piece -Total dimensions: Ø 905 x 820 mm -Weight: 89 kg/pc.
used
Directional control valve, solenoid valve, normally closed PNEUMATICS ATLAS D223DBKG 7250P G 11/4 ( inches ) Pn: 0,, 5 - 16 bar 24 V DC 14 W installation length: 140 mm Material: Brass, NBR used, tested ! Dimensions ( directional control valve ): 175 x 97 x 145 mm
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm
used
Wittig Compressor ROL 65 Pressure generator from 2000, complete (closed module) 1 available 357 m3/h, 8 bar. Manufacturer: Wittig GmbH Model: ROL 65 Type: piston compressor Serial Number: 920171/17 Flow rate [m3/h]: 357 Pressure outlet [bar]: 8 Power [kW]: 37 Year of construction: 2000 Running hours [h]: – Weight [kg]: 1.071 Dimensions LxWxH [cm]: 111x90x180
used
Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Condition of the scre conveyor: very good -Execution: stable -Drive motor: hydraulic motor -Speed: 150 rpm -Diameter of the screw conveyor 200 mm -Small wing thickness: mm -Length of the screw conveyor: 4470 mm -The pitch of the screw conveyor: 95-195 mm -Opening can be closed hydraulically (dosing screw) -Number: 2x conveyor screws available (outlet different) -Price: per piece -Transport dimensions: 4470/435/H450 mm -Weight: 302 kg/piece
used
Refrigerated compressed air dryer from 2004, complete (closed model) 1 available 1100 m3/h, 12 bar Manufacturer: Arctic Star Zander Model No.: AS1100 Type: Refrigerated compressed air dryer Serial Number: 2794660001 Volumetric flow rate [m3/h]: 1,800 Pressure inlet [bar]: 12 Power connection [KW]: 3 Year of construction: 2004 Weight [kg]: 208 Dimensions LxWxH [cm]: 92x97x112
used
CURSAL automatic unloader, for fast miter saws with Working direction from right to left, consisting of: - motorized roller conveyor, useful length 2 mt, roller width 320mm - 4 motorized catenaries for translation of pieces cut at 90° - 3 support supports pieces, for storage on lifting table - BOLZONI lifting table 1500x800mm, capacity 1000 kg, pneumatic lifting, table height closed about 130mm - touch-screen control for line automation, on separate panel - perimeter protections with light curtains - overall dimensions about 2.5 x 4 meters Machine to CE standards, in excellent condition
used
Demag Compressor 080IIH Pressure generator from 1986, complete (closed module) 1 available 505 m3/h, 6 bar. Manufacturer: Mannesmann Demag Model No.: 080IIH Type: piston compressor Serial Number: 920 501 / 78 Capacity flow rate [m3/h]: 505 Pressure outlet [bar]: 6 Power [kW]: 45,5 Year of construction: 1986 Running hours [h]: – Weight [kg]: 1.978 Dimensions LxWxH [cm]: 246x122x143
used
Hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm
used
Butterfly valve with pneumatic actuator, vacuum valve, normally closed M&S M-304L M-304L/1.M-304Lbr /M-304L/1.4307-DN32-G0903 M-304L/1.4307-DN32-H3276 DN32 pneumatic actuator: PAMS1 Operating pressure: 4.8 - 8.0 bar Air consumption: 1.2 - 2.0 l/stroke Material: stainless steel (1.4307) used, tested ! Dimensions: 300 x 90 x 95 mm
used
LIQUIDATION of automatic injector, manufactured by RUHLE model IR112. Used equipment completely revised, with guarantee and in prefect condition. The 112-needle injection system represents a novel state-of-the-art machine construction that meets all requirements. Offering a contact surface of 700 mm, as well as 60 injection strokes per minute, the IR 112 achieves a maximum performance of up to 7,000 kg per hour. You can attach a detenderizer (equipment not available). Machine measurements: 2240 mm high closed covers, 2430 mm high open covers, 1850 mm long x 1280 mm wide, tape width 700 mm. Practically new re-release team. Reviewed and guaranteed.
used
Cone valve, pharmaceutical design Manufacturer: Visval AG Type SoliValve 100 Year of construction August 2018 Suitable for the powder transfer industry. It allows the transfer and dosing of powder under the best containment conditions. It is suitable for operation within OEB5. Fully automatic and closed of solids in bags, bottles, drums (1L to 700L). The opening is controlled by a high-precision stepper motor and a backlash-free ball screw, which enables opening steps with an accuracy of up to 0.1 mm.
used
Stop limit FESTO SVK-3-PK-3 12146 Operating pressure: -0.0.9 to 8 bar normal nominal flow: 50 l/min nominal diameter: 1.5 mm valve function: 3/2 closed monostable Actuation type: mechanical Construction: Ball seat Reset type: mechanical spring Overall length: 56 mm thread: M12 x 1.0, length: 32 mm 2x nut, wrench size: 17 / 19 mm New ! Dimensions (packaging): 60 x 25 x 25 mm
used
Timing belts, timing flat belts BRECO BRECOFLEX® 32AT10/1410 Art. -No.: 144919 MARPOSS - Item no.: 1 F4448351420 Length: 1410 mm Width: 32 mm profile: AT10 pitch: 10 mm tooth width: 7.2 mm tooth height: 2.5 mm closed New ! Dimensions( Packaging ): 300 x 160 x 35 mm
new
1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...
used
Alfa Laval Plate Heat Exchanger M15-MFM heat exchanger from 2007, complete (closed model), 1 available. 94 L, 10 bar Manufacturer: Alfa Laval Model No.: M15-MFM Type: Plate Heat Exchanger Serial Number: 30106-27946 Capacity [L]: 94 Pressure [bar]: 10
used
TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...
used
The Hurco VMX 60i is constructed from a heavy-duty ribbed frame made of fine-grained, high-quality cast iron. Double nut ball screws, pre-tensioned, are secured at both ends for increased precision and rigidity. The double-wound spindle provides the required cutting power. Optimum machine performance is dependent on site installation conditions such as power supply, air supply and ambient air. Information subject to change without notice. Additional features help increase productivity. An efficient closed cooling system ensures reliable cooling of the tool. Machining center: 4-axis, pictured manual (not for sale)
used
Alfa Laval Plate Heat Exchanger T20-BFG heat exchanger from 2008, complete (closed model), 1 available. 221 L, 10 bar Manufacturer: Alfa Laval Model No.: T20-BFG Type: Plate Heat Exchanger Serial Number: 30106-36399 Capacity [L]: 221 Pressure [bar]: 10
used
Trumpf TruFlow 5000 CO2 Laser Cutting Machine Table size : 1500 mm x 3000 mm Power : 5 kw All maintenance has been done regularly by Trumpf Machine has Lift Master Compact for loading and unloading Chip Conveyor - Closed machine frame with integrated laser unit - Motion unit for high precision processing - Torque drive in combination with direct linear drives - Enclosed beam delivery system - Single cutting head strategy - Chiller - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 5000 - Maintenance-free radial turbine blower - Radio-frequency excitation - Laser control TASC 3 - Laser power control - Logbook function laser Cutting head - Lens cutting head with 250mm focal length - Universal quickchange device for cutting head (UTI) - LensLine with status check - ...
used
Directional control valve, solenoid valve, normally closed PNEUMATICS ATLAS 249DVFG 8250P G 1/4 ( inch ) Pn: 0 - 13 bar Without control solenoid !Without control solenoid ! for a control solenoid with core diameter: Ø 15 mm, length: 30 mm installation length: 38 mm Material: brass New ! dimensions (directional control valve): 63 x 38 x 20 mm
used
Sondex Heat Exchanger S44A-IG16 Plate heat exchanger from 2018, like new, complete (closed model), 1 available. 232 KW, 25 L, 10 bar Manufacturer: Sondex Model No.: S44A-IG16 Type: Plate Heat Exchanger Serial number: SD 32444 Capacity [L]: 25 Pressure [bar]: 10 Year of construction: 2018 Weight [kg]: 410
new
Code: N0200 Brand: TOMAR Model: COMO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 450 Max distance between uprights mm 3150 Length of arms per side mm 700 Useful gap between arms mm 120 N° 22 Pvc-coated shelves Load capacity kg 300 N° 4 swivel wheels for handling (2 with blocking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 750 x 1900 h - Trolley max opening mm 1500 x 3350 x 1900 h Overall dimensions for transport: mm 1500 x 750 x 1900 h Weight kg 115
used
Roders RXP600 DSH Precision High Speed ââCNC Milling Center Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm Distance from spindle nose to table: 515 mm Tool magazine: 28 positions Overall dimensions in transport position: W 2300 à D 2800 à H 2920 mm. Total weight: 10200kg. Spindle Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany) Power: 14 kW, 3000-42.000 rpm Tool holder HSK 40: Maximum tool diameter: 16 mm. Desktop Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis. A-axis tilt range: +/- 115 degrees. C-axis tilt range: +/- 360 deg. Workpiece weight: 200 kg. T-slot table size 340 à 340mm (ø400) Groove width: 12mm. Distance between grooves: 45 mm. Linear motors: all axes Cooling of the main a ...
used
BOY 55 silicone injection moulding machine. Top condition used for technical service lab and never used in production. Description Features of the Boy 55A Procan CT Procan CT control Boy configured from factory for silicone. Hydraulics, closed loop with 35mm radius shut off nozzle. Clamping unit. 42 mm LSR silicone plasticising unit. 2 station Air ballast. Anti vibration mounts. Watercooler for barrel available Perfect condition. Used for lab samples only. All offers considered. Purchaser collects.
used
A new CTX 1250 TC turning / milling machining center with a milling spindle, counter spindle and bar feeder is on sale. The cost of the machine is discussed and indicated taking into account delivery to the enterprise, it is possible to provide a guarantee up to 6 months, commissioning and training. Basic machine B-A7255 CTX beta 1250 TC Universal lathe The maximum workable length is 1250 mm. - Main spindle: integrated motor spindle ISM 76 - Main AC drive 25/34 kW (100/40% ED), 5000 min-¹. - Open jig (hydr.) With an inner diameter of the draw tube of 67 mm. Clamping force 68 kN at max. P 45 bar. - C-axis with spindle brake (hydr.) - Cross slide with integrated milling and turning motor spindle with hydraulic clamping for turning operations, HSK-63A taper according to DIN 69893 - Y-axis ± 100 mm - B-axis ± 110 ° pneumatic clamping - Disk tool magazine for ...
used
PROMASS EPS moulding machines model PS1710 Selling 4 PROMASS EPS moulding machines model PS1710 with automatic mould change. They were manufactured and purchased in 2005 for the opening of a plant that was closed in 2009, so they had been in operation for a little less than 3 years and a few cycles of use. They were disconnected in full performance and perfect condition and some spare parts are being changed and reviewed for their set-up. Price per unit
used
Line for plastic coating of metal profiles. It has HEADS FOR PLASTICING closed steel profiles with mouthpieces of dimensions 40mm x 60mm and 60mm x 60mm. Mouthpieces can be of any shape for D100mm pipes and 80x100mm profiles But you can cover any profiles. Capacity 45 kg of plastic per hour. Feed rate depends on the profiles, max 45 kg/h. year of construction 2015. Unused, still packed. Steel pipe PVC Coating production line 1 SJ55/25 single screw extruder 2 Coating Mould 3 Steel straighter pipe feeder 4 Water tank 5 Haul-off (2 claws) 6 stacker SJ55/25 single screw extruder Output capacity: max. 45kg/h Screw : Diameter of screw: Ф55mm L/D: 25/1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.6 ~ 0,8mm, Polishing Max. rotating speed: 50rpm Barrel: Material of Barrel: 38CrMoAlA Inner processing: Nitride with thickness: 0.6 ~ ...
used
Biosan microplate washer. Scrubber purchased in 2017, efficient, not used, turned on once to check if it works. The Inteliwasher 3D-IW8 microplate washer is designed to wash a variety of standard 96-well microplates, split plates such as Flat Bottom, U-shaped and V-shaped FastFrame (rectangular well) microarrays. The washer is a fully programmable device to perform multi-stage work. It operates in a single point in a hole, two points in a hole or cyclically (in a circular or rectangular path), liquid dispensing mode, and washing and rinsing mode (in cycles of both functions). The fluid dosing system allows dosing each of the three independent channels for buffers separately. The 4-CHW recorder connected to the washer provides automatic control of the volume of washing solutions and beakers. Shows the volume of reagent in each bottle (in percent) and alerts you when the fluid is runn ...
used
Pure C-810 / C-815 Flash are advanced, powerful flash systems which allow more purification in less space thanks to their compact design. They ensure safety on the highest level and can be operated outside of a fume hood, as they are equipped with a closed fraction collector bay. Also, they are furnished with leak and pressure sensors as well as with a remote control to reduce exposure to the lab environment. Pure C-815 is additionally equipped with integrated ELSD that is dedicated to flash chromatography and exhibits the lowest sample loss in the market. The Pure Chromatography Line by Buchi Labortechnik AG embodies flash and prep HPLC instruments in one system, easy to use for any flash or prep HPLC application. Typical Applications: Purification after synthesis, preparative isolation of a compound from a formulation, purification of APIs after organic synthesis, screening o ...
used
DLyte 10 is a metal surface finishing equipment using dry electropolishing technology, It is suitable for companies with medium production volume. It is designed for high value, very small, fragile and delicate parts that require high finishing requirements, as well as for research and development purposes. and for research and development purposes. Its automatic, one-step process reduces the complexity of todays multi-step finishing processes, while improving profitability and repeatability. repeatability. This machine does not require a closed system to recycle water and sludge. water and sludge treatment, reducing space, labor and permitting space, labor and the environment. It is suitable for rooms with a working volume capacity of 140 Ã mm x 75 mm and a maximum weight of 2.5 kg.