closed die used for sale

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer. , See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 785; Engine: Rehlko KDI2504TM-40; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 100

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer., See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 953; Engine: Rehlko KDI3404TM; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 100

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer. , See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 756; Engine: Rehlko KDI2504TM-30; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 100

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer., See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 640; Engine: Rehlko KDI1903M; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 66

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer., See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 510; Engine: Rehlko KDW1404; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 50

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

This genset is equipped with DSE 8610 MKII and motorized breaker applicable for net synchronization., , Surplus Unused 2023 Generator., Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch; Gross weight [kg]: 7250; Engine: Baudouin 6M33G660/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1100

Key data: 200 KW, 250 kVA, 400 V

Olympian Caterpillar Diesel generator in good condition. It has the following specifications: Power: 200kVA/ 200kW Year: 2009 Hours: 7000 approximately. Soundproof chamber with control panel. Video of operation available upon request

diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100

diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000

diameter range 6 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 600

diameter range 5 mm shaft length under head 70 mm max. cut-off length 88 mm output pieces/min 500

with washer assembly diameter range 6 mm shaft length under head 80 mm max. thread length 62 mm output - pieces/min 450

diameter range 4-12 mm shaft length under head 150 mm max. thread length 130 mm output pieces/min 85-220

vibratory feeder diameter range 3-8 mm shaft length under head 150 mm max. thread length 80 mm output pieces/min 400

diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 58 mm output - pieces/min 250-480

vibratory feeder diameter range 10 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 400

vibratory feeder diameter range 6-12 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 100-330

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

diameter range 1,6-4 mm shaft length under head 50 mm max. thread length 30 mm output pieces/min 300-750

vibratory feeder diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

diameter range M8-M12 number of dies 4 number of stations (incl. cut off) 7 max. thread length 75 mm shaft length under head 20-125 mm cutting length 30-150 mm max. width acros flats 22 mm press power 1500 kN

bushing cut-off , PKO diameter range 10-22 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 200 mm shaft length under head 160 mm output - pieces/min 60 max. thread length 95 mm max. width acros flats 32 mm

bushing cut-off , PKO , IFO diameter range 6-10 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 75 mm shaft length under head 50 mm output - pieces/min 285 max. width acros flats 17 max. thread length 50 mm

Closed cutter , IFO , PKO , with thread roller and pointer diameter range 6-16 mm number of dies 4 number of stations 7 cutting length 340 mm shaft length under head 65-300 mm output - pieces/min 60-90 max. thread length 65-150 mm press power 150 to

bushing cut-off diameter range 16-27 mm number of dies 4 number of stations 7 cutting length 50-240 mm shaft length under head 30-180 mm range of thread length 95 mm max. width acros flats 24-41 mm output - pieces/min 84

bushing cut-off diameter range 6,5 mm number of dies 8 number of stations (incl. cut off) 9 cutting length 6-10 mm plane of stroke 123 mm output - pieces/min 150

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

bushing cut-off diameter range 5 mm number of dies 6 number of stations (incl. cut off) 7 cutting length 35 mm shaft length under head 25 mm output - pieces/min 400 press power 15 to

bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 190 mm shaft length under head 175 mm output - pieces/min 120 press power 220 to

diameter range 8 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 65 mm shaft length under head 54 mm output - pieces/min 350 press power 56 to

bushing cut-off , PKO , Forma packs diameter range 11,8 mm number of dies 5 number of stations 6 cutting length 3 - 45 mm shaft length under head 50 mm output - pieces/min 85 - 255 press power 50 to

bushing cut-off , PKO , IFO , Slug feeding possible diameter range 16-34 mm number of dies 5 number of stations 6 cutting length 210 mm shaft length under head 180 mm output - pieces/min 55-80 press power 450 t

bushing cut-off diameter range 8-22 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 6-140 mm output - pieces/min 125 press power 250 to

bushing cut-off , PKO diameter range 14 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 127 mm shaft length under head 90 mm output - pieces/min 200

bushing cut-off , PKO diameter range 16 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 160 mm shaft length under head 125 mm output - pieces/min 150

bushing cut-off diameter range 8-18 mm number of dies 5 number of stations (incl. cut off) 6 shaft length under head 120 mm cutting length 140 mm output - pieces/min 60-170 press power 100 to

bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 175 mm shaft length under head 130 mm output - pieces/min 86 - 130 press power 220 to

diameter range 10- 18 mm number of dies 4 number of stations 5 cutting length 155 mm shaft length under head 125 mm output - pieces/min 90 press power 200 to max diameter of the head 35 mm

bushing cut-off , PKO diameter range 16-30 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 235 mm shaft length under head 180 mm output - pieces/min 90 press power 380 to

bushing cut-off , PKO , IFO diameter range 6-14 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 280 mm shaft length under head 220(260) mm output - pieces/min 40-75 press power 100 t