clip 6 rm used for sale

Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 600 mm -Length: 2290 mm -Thickness: 2 mm -Transport dimensions: Ø 100 x 600 mm -Weight: 2.6 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm -Weight: 10.6 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm -Weight: 6.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 36/47 kW -Type: 6SN1145-1BA02-0CA1 -Dimensions: 310/200/H480 mm -Weight: 15 kg

Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed frequency converter .. Please ask if needed Features: Construction year: 1999 condition: good (used) Conveying length in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,7 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hör ...

Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800

Drive gear for hot forging press K8548 6300T Weight, kg 15 700

Driven gear for hot forging press 6300T Weight, kg 1300

Clutch hub for hot forging press K8548 6300T Weight, kg 7100

Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

description: Here we offer a Siemens Simatic Coros OP25 panel. The panel is still packed in its original packaging, unused and in a perfect condition. After delivery / pickup, you have the right to return the panel without giving reasons, within 4 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as  ...

Several transformers for sale: Here is a 630KVA 20-0.4KV Hermetic Home Converted to plug-in bushings and completely resealed, insulating oil is as good as new due to reprocessing Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) There are 2 identical buildings available We have many more transformers in stock, also some 10,000-1000V transformers are available

Internal Device TACCHELLA 612 complete with spindle, dressing unit, Information about technical data are not binding., Machine available subject to prior sale.

Spare parts Siemens 810 GA2 CNC numerical control + Simodrive 611 power supply and drives It can be inspected in our warehouse in Gussago BS Mimu Machine Tools

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

The Projet 660Pro full-color 3D printer from 3D Systems is for sale. The machine is in excellent condition and has been recently serviced according to the manufacturers specifications. Several models are available.

Age 2004, Consisting of:, Base Machine is a OMSO DM44N 2-Lane Lid Machine without the Print Heads and UV-Tunnel, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumalator as well 2 x Denesting unist each with a Vertical Magazine with Universal Helical Screws with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Label Dispenser, Label dispensers, with PLC Controls manufactured by Fuji Seal, Switzerland Outfeed Conveyor to 2-Lnae Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Vision System to monitor the Color and positioning of the Labels 400 V, 3 phase, 50 Hz, Max. Lid dimensions: [Round Lids]: Dia. 125 mm, Height: 25 mm. [Rectangular & Oval Lids]: 125 x 150 mm, Height: 25 mm, Single L ...

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered AS IS, WHERE IS., price options: as is, checked, lightly reconditioned, totally reconditioned

Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width

2025 BIG backhoe bucket 60cm with Martin M3 attachment

2025 BIG backhoe bucket 60cm with MS01 Symblock attachment, Technical specifications:, - Weight: 80 kg, - Recording width: 60 cm, - Contents: 95 liters, - CAT 2 - suitable for 1.9 - 2.7 t excavators

BIG backhoe bucket 65cm working width with Atlas attachment, with welded cutting blade and teeth, Dimensions of the mount:, Bolt diameter: 100 mm, Rear locking bolt: 40 mm, Handle/mounting width: 250 mm, Bolt spacing [Center - Center]: approx. 350 mm, suitable for 6-12 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

In Stockroom at the warehouse in Blomberg! The KR BM 600 is a profile spraying machine of the latest Kama generation. The machine is equipped with a wide cabin, a conveyor belt transport system with paint recovery and belt washer system. Automatic loading and unloading systems are available as an option. SPRAY ARMS, PART DETECTION 4 spray arms, adjustable in height, inclination and angle, are installed as standard. adjustable in height, inclination and angle. On these arms the 4 spraying can be used. By means of part recognition at the inlet of the spraying machine the individual spray guns are controlled. Optionally, additional guns and pumps can be installed or a version with a double booth can be selected. CONVEYOR AND BELT CLEANING SYSTEM WITH PAINT RECOVERY SYSTEM The paint that is sprayed onto the 600mm wide polyolefin conveyor belt is automatically squeegeed off and can be reus ...

- Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %

Pneumatic can opener, make Edlund, type 625 M, powerful compressed air operated lid punch, (crown punch),, industrial can opener for large cans,, self-sufficient can opener for industrial use,, Output: approx. 2,000 cans per day, Characteristics:, completely made of stainless steel, for thorough cleaning can be hosed down from top to bottom, IP 65,, Suitable for opening cans of almost any size thanks to the height adjustability, Two - hand - operation, Compressed air requirement: 56.6 l / min at 6 bar,, format range:, minimum box height: 40 mm,, max. box height: 300 mm,, max. can diameter: 230 mm,, Info:, - Existing punching crown for can diameter 153 mm, - Additional punching crown optional, - With magnetic lid remover

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schad Sintec, transformer type ISK-ST 630 -Input: 400V / 1.7A / 50-60Hz -Output: 230V / 2.74A / 630VA -Technical data: see photo nameplate -Dimensions: 130/120/H155 mm -Weight: 10.1 kg

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: FA061-8EA.6F.1 -Power: 0.36 kW / 680 rpm -Number: 1x fan available -Dimensions: Ø 610 x 160 mm -Weight: 14.9 kg.

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece

VECOPLAN VAZ M-K-T- 1600, 1.600 mm long rotor, rotor diameter 370, rotor rpm 200, HI-TORQUE a.c.motor 110 kW, n.42 cutting pieces 60x60 mm, screen size 60 mm (or different), horizontal ram, hydraulic pack, Electric cabinet, Total dimensions : LxWxH mt.4,315 x 2,885 x 1,600, Total weight kg.7.200 ca, Machine offered totally reconditioned, Our offer includes a MTA chilling unit, installed power - used power in work: about 60-65% : 110 kW, working width: 1.600 mm, conditions: reconditioned, type: Single shaft

Martin Miniline 616, - Vacuum feeders, - Max.Speed: 24,000 Sh/h, - Max.Size: 600x1600 mm, - Year 1974/1991, - 2 Color Flexo, - Slotter, - Rotary die cutting, - Folding gluing, - Counter Ejector, Year 1991

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

price only for filter frame Plates maximum: 150 Plate formats: 600x600 dimension ca. 310x90x220 cm Distance between first plate and spindle approx.140cm

Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph General machine features This Machine integrates efficiently into low and medium capacity bottling lines. GAI manufactured this unit in the year 2012 and configured it to operate at a nominal speed of 1200 bottles per hour. Therefore, this output makes the machine suitable for operations that require flexibility, reliability, and compatibility with various container formats. In addition, its design supports a wide range of production environments. Capsuling unit configuration The capsuling unit rotates in a clockwise direction and uses rotary motion to handle capsule application. Specifically, the machine includes two independent heads. One head applies heat shrink or poly capsules for still wine. The other head applies tin or polylaminate capsules for sparkling wine. As a result, this dual head configuration allows ope ...

Used SMI SK 600F shrink wrapper 21600 BPHTechnical Specifications & Performance DataThe SMI SK 600 F Shrink Wrapper is an automatic packaging machine designed for high-efficiency bundling with shrink film in beverage production and industrial packaging environments. Manufactured by SMI engineering, this second hand machine delivers reliable performance and versatile pack configurations for PET, glass, and aluminum can containers. Optimized for integration into a used bottling line, it supports applications across water, CSD, milk, oil, beer, wine, and spirits.Manufacturer: SMIModel: SK 600 FYear of construction: 1998Maximum speed: up to 21,600 units/hour (approx. 60 bundles/min with 3×2 of 1.5L)Current format: 1.5L, 3×2 bundleContainer materials: PET, Glass, Aluminum cansPackage type: Shrink film (trayless)Max container height: 380 mmMachine pitch: 545 mmWorking height (table): 125 ...

Horizontal batch mixer with 630 l. gross content, pneumatic outlet flap (new cylinder), 37 kW engine, Flender gearbox (N2 = 58.58 UPM) and carbide-armoured mixing tools. Workshop overhauled in 2016; very good condition.

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Pressure 6.3 to. ub 450 mm, extension 200 mm, pushing speed 3.5 m/min, installation height 700 mm, table size 360 x 320 mm, table height 750 mm, total power 2kW, weight. 900 kg

Cylinder head F/BFL912/913 Net= 165,- Cylinder head FL812W Net= 345,- Cylinder head FL812D Net= 345,- Cylinder head FL712 Net= 345,- Cylinder head FL612 Net= 395,- (all cylinder heads kpl.with valves ready for replacement available) Piston+female 712/812 Net= 245,- Piston+female 912 Net= 100,- Head screws 912/913 Net= 15,- Head screws BFL913 Net= 15,- Head screws FL712/812 Net= 36,- Head seal kit F/BFL912/913 Net= 9,- Head seal kit FL712-812 Net= 25,- Nozzle insert FL912-913 Net= 30,- Nozzle insert BFL913 Net= 30,- Nozzle insert BFL913- P-nozzle Netto= 45,- all prices subject to change,price changes reserved per piece plus geseinfo@miw-zeven.dtzl.Tax email=

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

Valmet/Sisu Engine Type=612 DSE-135KW, Factory Repaired Engine with starter+alternator.New TOP-MOTOR ! info@miw-zeven.de

SISU/Valmet engine type=612DSE,135KW,6-cylinder series with turbocharger. Motor is complete with starter+alternator,factory repaired. 1 year warranty info@miw-zeven.de

1 used shrink tunnel, made ZVT (now KHS), type ST/II-600DG. Built in 1995. With belt braiding tape (for untabivalent products such as PET bottles). Total length 6,000 mm. Passage 570 mm High x 400 mm wide. E-connection 415V (x5%) / 50 Hz. Top condition (belt recently renewed!). Operator side: right or left. (2 machines available).

Deutz cylinder heads in exchange complete with new valves, seat rings+guides Head screws FL712/812 = Net 36,-/piece Head seal kit FL712/812 = Net 25,-/set all prices per piece plus. law.Tax.Price changes reserved. info@miw-zeven.de

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen. info@miw-zeven.de