clip 6 rm used for sale

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 600 mm -Through hole: Ø 136 mm -Hole circle: Ø 170 mm -Weight: 111 kg

ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens/Landis & Staefa, air damper actuator -Type: SQN75.6K4A11 -Voltage: 110 V -Number: 2 pieces available -Price: per piece -Dimension box: 155/110/70 mm -Weight: 0.4 kg/piece

crankshaft standard Hours with class Part No 746673 Part No 146673

Handtmann VF 608 Filling - Portioning - Turning Off Year of construction 2008 Price on request

Kolloplex pin mill type 630 Z, Drive : 55 KW Weight : 1100 kg; --> Stifscheiben diameter housing and door side : 630 mm;

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Lenze, braking resistor -Type: 100 Ohm 0.6 kW -Dimensions: 640/90/H115 mm -Weight: 3.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 600 mm -Piston rod: Ø 22 mm / M16 -Dimensions: 800/75 / H70 mm -Weight: 11 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Siemens, Simodrive -Type: 6RB 2101-2A-Z -Overall dimensions: 300/460/H240 mm -Weight: 18 kg

PLC control, electronic module -Manufacturer: Siemens -Type: Simatic S7/6ES7 -Modules: see photos -Dimensions: 160/105/H75 mm -Weight: 0.5 kg

Automatic vegetable cutting machine Material: Stainless steel Dimensions: 13006001100mm Net weight: 100kg Voltage: 220V/380V Frequency: 50Hz Capacity: 200-700kg/h Diameter: 250 mm Power: 1500w Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

for self-adhesive Tesa adhesive tape, Carton adjustable in height and width, Space requirement:1250 x 800 x 1600 mm high Weight 180 kg from location warehouse

Connection line, connection cable, data line, bus cable, signal line -Manufacturer: Siemens signal cable in original packaging -Type: 6FX8002-2DC20-1ABO -Quantity: 1x available -Price: piece -Dimension packed: 245/190/H30 mm -Weight: 0.2kg

Wet acceptance system, swimming / sinking system, swimming / sink container with discharge belt, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Type NA 650 Filling height approx. 2 m Funnel approx. 2.4 x 1.9 m Depth to the band approx. 1.2 m Bandwidth approx. 600 mm Drive via infinitely variable gear motor Total dimensions: approx. 4 x 2.1 x 3.1 m The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Underfloor engine for Mercedes model OM 447 HLA / MTU 6R183 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1127 mm -Width: 14 mm/height: 58 mm -Price: per pair (left right) -Weight: 2.9 kg

Siemens Sinumerik 3G, 6FC 3741-OMA-Z Not checked for functionality. Sold only to traders! All information without guarantee

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1131 mm -Width: 13 mm/height: 56 mm -Price: per pair (left right) -Weight: 2.9 kg

Faceplate, faceplate chuck, four-jaw chuck -without: screw-on jaws Manufacturer: Forkardt -Mouth size: Ø 610 mm -Cone holder short cone: 8 (139 mm) -Weight: 121 kg

Code 101237 Description Universal Cylindrical Grinder Make WMW Heckert Model SA 5 U x 630 Serial No. 3115 Year 1981 Grinding length, max. 630 mm Grinding diameter, max. 275 mm Centerheight 140 mm Max. Weight workpiece 125 kg Table tilting angle - 5° till + 11,5° Diam. Grinding wheel 500 mm Width Grinding wheel, max. 100 mm Motorpower grindingwheel 5,5 kW Speeds workpieceholder 31,5 – 710 rpm Total power 12,5 kVA 380 Volts Machine size L x W x H 3,9 x 2,3 x 1,6 meter Weight 4800 kg Accessories coolant with magnetic some tooling Condition Machine is in good condition

Volume : 618 ltr. Material : areas in contact with the product in stainless steel Working pressure : 3 bar Working pressure jacket : 3.5 bar temperature: 145°C Temperautr jacket : 148 ° C Vacuum drum : 50 mbar;

screw size: 115 mm injection shot weight in Polysterol: 3915 g/PS closing pressure: 6600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -Manufacturer: FXMeiller, hydraulic cylinder / tilt cylinder stroke 670 mm -Piston rod: Ø 45 mm / holder Ø 40 mm -Recording cylinder: Ø 50 x 45 mm -Cylinder: outside Ø 102 mm -Dimensions: 1055/210 / H180 mm -Weight: 50 kg

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: IDM 100/30.6013/2 -Power: 40 W -Speed: 1380 rpm -Shaft: Ø 9 x 8 mm -Design: B5 -Protection class: IP 22 -Dimensions: 165/135/H160 mm -Weight: 4 kg

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, ET 200S Compact -Type: 6ES7 193-4DL00-0AA0 TM-C120C -Dimensions: 120/170/H45 mm -Weight: 0.5 kg

Balancing valve, shut-off valve, ball valve, ball valve -Manufacturer: Castel, ball valve, unused, original packaging -Type: 6590/M12 -Connections: 12 mm ODS -Cardboard dimensions: 130/85/H40 mm -Weight: 0.3 kg.

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, mounting plate -Partial mounting plate: 500 x 700 mm -with: fastening material -Dimensions: 700/500/H20 mm -Weight: 8.6 kg

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling machine Brand: Flott Type: 6STW Technical data: Drill chuck holder: B12 Drill chuck stroke: 40mm Distance from column to drilling area: 180mm Thickness of the column: 50mm Worktop: 180x260mm Motor: 0.9 kW Speed: 1250-8000 rpm Weight: approx. 20kg Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 132 teeth -Number: 19x saw blades available -Price: per piece -Weight: 10,1 kg/piece

Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg

Loading caterpillar Hanomag D 600 functional, top engine

Lamination Machine

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

Clamping plate, welding table, welding table, straightening plate -Mounting plate is: steel -Width: 650 mm -Length: 650 mm -Height: 845 mm -Plate thickness: 40 mm -Plate is: on steel frame -Transport dimensions: 650/650/H845 mm -Weight: 203 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 15 mm -Height: 57 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 2.7 kg

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: Heidenhain TNC 430 total power requirement: 26 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill -Nominal input: 740 watts -Max. drill bit: Ø 13 mm -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Side door -Dimensions: 1980/635/H40 mm -Weight: 26 kg

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.