cleaner used for sale

Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible.

Cold water high-pressure cleaner with 4 kW power 170 bar pressure and 14 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High-pressure jet pipe with nozzle Optional (additional cost): - Hose reel with 15 m hose The images c ...

Manufacturer: Cleanfix Type: RA 660 Navi L50 Year of manufacture: 2018 Condition: good (battery replacement and software update necessary)

For sale is a used low-pressure cleaner, from the manufacturer System Cleaners. The LEDA 5 comes from a prototype plant and is only 50 operating hours. Year of Make: 2011 Type: LEDA 5 FF Max. temperature: 70°C l/min. max.: 120 Voltage: 3 x 400 V Frequency: 50 Hz Dimensions (L x W x H): 1700 x 800 x 540 mm Weight: 150kg Grundfos Vertical Pump: CRNE5-14 J-CA-GI-E-HQQE incl. installation and maintenance instructions Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

Floor cleaners, floor preparation products, floor coating -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: cleancraft, industrial vacuum cleaner type wetCAT 131 IRH -Connection: 230 volts -Power: 2.4 kW -Dimensions: 500/470/H1100 mm -Weight: 10 kg

Manufacturer: Turbo Clean Type of Machine : Parts cleaning machine Model : T10-400 Year of manufacture: 2007 Machine Weight: 550 kg Maximum Fill Volume: 18 L Maximum Load Weight: 15 kg Installed Power: 7.0 kW Mains Voltage / Frequency: 3 x 400 V / 50 Hz Pneumatic Connection: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details.

This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details.

.

Used capping machine Clean Pack up to 2500 bph Machine Specifications Firstly, the CLEAN PACK brand capper features a single-head configuration, specifically designed for applying T-caps. Importantly, this technical choice allows for precise cap placement, which is essential for ensuring the integrity of the bottled product. Moreover, the cap distribution system operates through vibration mechanisms, an effective method for sorting and feeding caps to the capping device without interruptions. Speed Adjustment of the Used capping machine Clean Pack up to 2500 bph Secondly, the production speed of the capper is adjustable via an inverter. This allows fine control of the capping rate, tailored to the desired production rhythm. Consequently, this adjustment capability proves particularly useful in dynamic production environments, where requirements can quickly change. Configuration and Safet ...

Used CLEMENS FIAMAT filling monoblock 1800 BPHTechnical Specifications & Performance DataThis mobile filling and corking monoblock from the Fiamat range is designed to combine bottle filling and natural cork application in one compact unit. Built by Costral / Clemens Bottling Group in 1987, it is configured for Bordeaux and Burgundy glass bottles in the 0.75L format. Its compact, wheeled construction supports flexible positioning within a used bottling line or a dedicated small-scale beverage production area.Production capacity: up to approximately 1,800 bottles/hourFilling system: siphon/gravity fillingFilling nozzles: 16Corking system: vacuum corking head with 4 jawsContainer format: 0.75L Bordeaux and Burgundy bottlesOutfeed: rotating accumulation table, 450 mm diameterConstruction: fully stainless steelAdvanced Automation & Control SystemsThe filling circuit is supplied from above an ...

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Clextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam out ...

Used Used 2019 Sleever Clever 12.000 bph: Year: 2019 Condition: As Is Used 2019 Sleever Clever 12.000 bph: Year: 2019 Speed: 12.000 bph Steam Tunnel Bottle rejection system Safety protections Code: EA 643 More details: https://bottlingscout.com

General SKULX013 MakeClextral TypeEV 29/32 High Torque Mach.No.TD 4 004 427-0020 EN Year of construction2002 Specified Features - Double screw extruder Double screw extrudercheck L/D36 Number of heating zones:8 Electric heating(8 × 1.8 kW = 14.4 kW total) Water cooling(2 m³/h, 4–6 bar, 11 kW) AC-motor(14 kW, 2000 rpm) Screw speed1200 rpm (max) Number of temperature controllers:8 (for each heating zone) With jacketcheck General LocationBarneveld With switchgearcheck Weight2000 kg Extra SpecificationsLubricating unit Power: 0.3 kW Water flow: 0.13 m³/h Thermic power: 0.75 kW &:nbsp:Hydraulic unit for barrel drive Power: 0.37 kW Oil capacity (ISO HV 46): 5 L Setting pressure: 187 bar &:nbsp:Barrel cooling (extra details) Type: Electrovalve Number of cooling areas: 9 &:nbsp:Water pump Manufacturer: Clextral – DKM Type: SPK PP12 Flow: 19 L/h Maximum pressure: 10 ba ...

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion

SLEEVE APPLICATOR CLEVER GS 602. performance on PET/Glass bottles: 45000 b/h : 0,4-0,5 L 24000 b/h : 1,5 L 22000 b/h : 2 L

Cleansorb for chemical binding of the process gas H2S Type: CS200BS Built: 2010

Used labeling machine made by Clever, model GS 602. New 2010, sleeve labels. Performance: 45,000 b / h (0.4l, 0.5l) 24,000 b / h (1.5l) 22,000 b / h (2l) work surface height 1200 mm (950 mm standard) electric consumption 22 kW low voltage 24 V supply voltage 400 V 5x25 mmq wiring recommended air consumption 180 l / min pressure 6 Bar weight 4500 kg.

Cold water high-pressure cleaner with 7.5 kW output - 270 bar pressure and 15 l/min. Including Hotbox 300bar Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protect ...

Cold water high-pressure cleaner with 4 kW output - 170 bar pressure and 14 l/min. Including hotbox up to 200 bar. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink p ...

Cold water high-pressure cleaner with 2.2 kW output - 150 bar pressure and 8 l/min. Including hotbox up to 200 bar. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): -  ...

Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Used labeling machine, sleeve applicator with a shrink tunnel made by Clever Machines, model GS 321. New in 2005.

Clever titulator with steam tunnel. 2 pieces available Year of construction 2004 and 2005 Type: GS 501 Capacity: 11,000 fl./h > 18,000 fl./h

FISH FOOD / PET FOOD EXTRUSION LINE CAN HAVE MANY APLLICATIONS FROM PET FOOD TO FISH FOOD was used to produce dog food output till 2 / 3 tonnes according to formulas Extruder was well maintained MODEL BC 82, TWIN SCEWS, has rails allowing to open totally the extruder to clean screw and barrels Extruder main electric cabinet coming with the line Conditionner Wenger , stainless, model 7 DCC , new in 2000 used for 2 years extruder main electric engine new in 2000, Continuous current LAK 4180 DA 400 volts, used for 2 years pelleting device, sieve, scale, buffer bin, STOLZ coater, STG 500 with vacum pomp the cooler (STOLZ RCC SEP 22X22F ) is not any included in the line many accessories, pomps, valves are coming with the line The line is partialy diassembled, plans could be provided Visits can be planned, enquiries for further details are welcome

Cleveland KGL40 kettle stainless, 40gallon, jacketed cooking kettle, adjustable temperature controls, steam jacketed, 1Ph

Cleveland TKET-6-T Twin cooking kettle 2009, stainless, steam jacketed twin vessels, 2 x 25L vessels, adjustable temperature controls, 3Ph

Respiratory protection filter -Clean AIR: basic 2000 -P SL R Art. No.: 80 00 10 -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece

Screws, hexagon head screws, socket head cap screws, Allen head screws -Hex bolts: M27 267 kg -Sizes/Quantity: M27 x 120 / M27 x 140, see photo parts list -Grade: 8.8 galvanized -Manufacturer: Cleff -Price/Sale: complete -Total weight: 267 kg

Manufacturer: Cleveland Model: GAPU-5 A/M Diamond Discs: - Maximum Diameter: 200 mm - Minimum Diameter: 180 mm - Maximum Width (with double disc): 100 mm Note: The supplied grinding wheel guard is designed for a maximum diameter of 200 mm and a minimum diameter of 180 mm. Workpiece Spindle: - Speed Range: 400 – 4500 rpm Planing Unit: - Swivel Range: 190° - Oscillation Stroke: 70 mm - Oscillation Speed: Infinitely adjustable - Spindle Speed: 1400 or 2800 rpm Planing Grinding Disc: - Diameter: 200 mm - Width: 20 mm - Bore Diameter: 32 mm Machine Dimensions: - Length: 1250 mm - Width: 1000 mm - Height: 1100 mm - Weight: 450 kg Noise Emission: - Standard Operating Sound Level: 83 dB(A) - May be lower in individual cases Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2-10 A DC Operating temperature: -20 to +70 °C Humidity: 0-90% without condensation You can also find the corresponding screw control in our shop!

Brand: CLECO Series: MPRO400GC Voltage: 230 V AC Frequency: 50/60 Hz Rated current: 2 A Power: Typical 250 VA Degree of protection: IP42

The Cleanfix RA430 is a robust scrubber dryer designed for medium-sized floor areas in commercial and industrial environments. Here are the key specifications and features: Key Specifications • Working width: 43 cm • Capacity: Up to 1,700 m²/h cleaning performance • Water tank: 33 liter capacity • Brush pressure: High for optimal cleaning results • Drive: The machine pulls itself forward by the rotation of the brush • Wheels: Large wheels ensure vibration-free operation and good obstacle handling Additional Features • Suitable for use in schools, hospitals, offices, and factories 12.1.203

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces

Clean Air System AOP Desktop, type DT 500 DeskAir PHI, For your workplace, whether in the office or in the home office, cleans the air and improves the indoor climate., - Length of the UV-C tube: 5 but has the, - power of 2.5, - Flow rate of the integrated fan:, - without blower, - Voltage: 230 V incl. voltage converter, - (integrated in the desktop) and 12 V plug, - Power: 12 volts 1 amp, - Case material: polymer, -, power: Room volume/ capacity: 74 m³ in 24 h, Dimensions / weight: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg, The machine has 40 stone removing plates, each with 50 holes.: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg

General SKU411T126 MakeClextral Framatome TypeEV 32 Mach.No.B 101 Year of construction2000 Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwclextral C0 Number of temperature controllers:8 MaterialStainless steel 1.4306 (304L) General LocationBarneveld With switchgear(as is) Floorspace4,3x1,42 m Total height3.26 Weight3460 kg CEcheck Extra Specificationsmachine comes with k-tron Feederspecifications:Type LWF D5/ Type K2-ML-T35/DRDia: 400mm feeder inletOutlet: 110mmPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersClextralIndustries > F ...

A Cleveland dressing and profiling machine for machining diamond and CBN grinding wheels is available. Dressing process: dry, max. single wheel dimensions X/Y: 400mm/30mm, max. wheel package dimensions X/Y: 150mm/150mm, grinding spindle diameter: 80mm, wheel flange bore: 32mm. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/2000mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.

A fully automatic Cleveland CNC cut-off and face grinding machine for carbide and HSS bars is available. Grinding spindle speed: 2000rpm, max. cut-off wheel diameter: 200mm, workpiece diameter range: 3mm-32mm, max. workpiece length: 500mm, length accuracy: +/-0.02mm, face runout accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 1900mm/1200mm/2400mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible.

Description Item # 9265 - EXTRUDER Manufactured by CLEXTRAL Model EV32

used Palettenetikettierung

Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 high-pressure gun with quick coupling and swivel joint in the input - Double jet tube with nozzle 065 and low pressure nozzle Optional (additional cost): - Hose reel - 30 m high pressure hose The images contain additional options. Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

New industry-standard hotbox for up to 400 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.