clean used for sale

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums -Manufacturer: Nilfisk, Industrial vacuum cleaner type GB 726 -Connection: 380-415 V 50 Hz -Power: 1.9 kW -Number: 3x industrial vacuum cleaners available -Price: per piece -Dimensions: 820/600/H1150 mm -Weight: 87 kg/unit

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -Manufacturer: Debus, industrial vacuum cleaner type DDS 605 7 31 M -Operating pressure: 6 bar -Air requirement: 2.6 m³/h -Suction performance: 7.8 m³/h -Dust container: volume approx. 110 liters -Dimensions of container total: Ø 640 x 730 mm -Dimension aggregate: 1330/620/H1360 mm -Total weight: 153 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: Wap, Industrial vacuum cleaner, 2-motor wet/dry vacuum cleaner -Type: turbo M2 -Connection: 220...240 volts -Power: 1400...1600 W -Dimensions: 700/600/H1070 mm -Weight: 30 kg

Manufacturer: Holtkämper und Adoplh, Type: Reinraum Spritzkabine, Year: 1996, Schleifraum m²: yes/, Lackierraum m²: yes/, Trockenraum m²: yes/, Zuluftfilterdecken: 2, Wet splashback: 2, Length max mm: 4000 X 2100, Sliding doors: yes, Number of spray booths: 1, Number of evaporation booths: 1, Underfloor exhaustion: yes, Hand spraying stations: 2, Radialventilatoren: 5, Exhaust air device: yes, Ex-installed lamps: yes, Air entry ° C: 12, Air exit ° C: 28, Supply air fan:: 3, Engine power kW: 7,5/3/1,1, Heating medium hot water: yes, Ceilings for incoming air: 2, Sliding doors: yes, Year :1996

Klinger bottle washing machine also for swing-top bottles. Machine can be planned and set up by us. We can also supply additional conveyor technology

Krones bottle washer built in 2001 676-039 6000 bottles/h 0.2l-1.0l bottles Machine will be available in December 2026

Air Pollution Control Equipment - Camfil Multiple air pollution control units from Camfil, one of the worlds leading manufacturers of air filtration and clean air solutions. This lot includes items comprising a range of air filtration and pollution control devices. Additional units sourced from Trox Technik and Ziehl-Abegg , both respected names in air handling and fan technology. Electrical cabinets from Thalassa are also included . Air Humidity Control Equipment - Fisair A complete set of air humidity control units from Fisair,providing a range of humidification capacities suitable for controlled environments, pharmaceutical facilities, aboratories,and clean rooms. Industrial Chiller - Trane Sintesis Advanced One Trane Sintesis Advanced industrial chiller , a high-performance cooling unit from Trane, a globally recognised leader in HVAC and cooling technology. The Trane Sintesis  ...

Semolina plastering machine MIAG DK 30 drive left, lighting, aluminium frame, 1 spare frame.

GENERAL Project No.: 905713 Quantity: 1 pcs. Manufacturer: GEORG RENDER Type: W 90 TH4 WSKAT PLC Control: Siemens SIMATIC HMI Year of Make: 2017 Condition: Used machine PARTS CLEANING Cleaning medium: Water-based Front loader Max. weight per load 120 kg GENERAL TECHNICAL DATA Total power requirement 26 kVA Machine weight approx. 750 kg NOTE We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.

An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible.

Sheet metal cleaning machine KD Putz Tubur 600 for 2 edge trays - Sheet metal cleaning machine with brushes - Manufacturer: KD Bakery Equipment - Type: Tubur 600 - 1.1 kW

A top-loading batch cleaning system Render is available. Pump capacity: 140l/min, cleaning bath fill volume: 130l, max. operating temperature: 130°C, load capacity: 120kg, connected load: 16kW, machine dimensions X/Y/Z: approx. 1350mm/1200mm/1350mm, weight: approx. 350kg. Includes a transport cart. Documentation available. An on-site inspection is possible.

Cleaning machine, Fabr. GM Gera, Type: Arcade, for 24,000 bph, control range 7,600 - 26,400 bph, 25 bph, cage pitch 95mm, chain pitch 140mm, with Siemens S7 control

Pressure washer, Nilfisk Food Ecolab XP Foamer F&B, for, foaming, disinfecting and rinsing, year of construction 2022, for wall mounting, without hose and spray lance, Connection 230V, dimensions LxWxH approx. 60x50x25cm, weight approx. 38kg, good used condition, fully functional

Cleaning machine, Fabr. GM Gera, type: Arcade GEK2.1RV1, for 4,000 bph, 9 b/row, with 0.5 lt NRW bottle, cell pitch 95mm, with pre-soak, caustic bath 1+2, hot water bath 1+2, cold water and fresh water spraying, year 2007

Cleaning machine Fabr. Krones, Lavatec type: KES-2-2-212/22-80, built in 1999 for 0.33 lt Vichy, 0.35 lt. AFN bottle, 0.5 lt NRW and EURO bottle with Siemens Simatic Touch Panel

Cleaning machine, Fabr. PAC, type: CB 16-1 R-7,5 LII, for 6,000 bph, up to 1 lt. bottles, 16 b/row, year 1994, L: 7350mm x W: 2800mm x H: 2800mm Weight approx. 8 to, disassembled, for sale.

Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used

A continuous-flow washout machine Glunz & Jensen for washing out and simultaneous gumming of chemistry-free offset printing plates is available. Brushes: 2, max. working width: 851mm, min. plate width: 231mm, min. plate length: 300mm, max. plate length: 1100mm, plate thickness range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1100mm, weight: approx. 130kg. The machine has been cleaned, dismantled and is stored in a dry warehouse. Documentation available. An on-site inspection is possible.

Spout-hand wash combination, stainless steel

Manufacturer: BvL Model: Rotocleaner RC 1950 RW 2T Year of Manufacture: 2008 Type of Machine : Cleaning System Operating hours: approximately 18,505 hours Key Features - Dual-tank system: separate wash tank and rinse tank for superior cleaning results - Wash basket diagonal of 2319 mm, allowing cleaning of large and small components - Maximum usable length: 1545 mm - Maximum usable width: 1545 mm - Maximum usable height: 1000 mm - Load capacity: 750 daN (approximately 750 kg) - Operating voltage: 3 x 400 V, N+PE, 50 Hz Wash Tank Specifications - Tank capacity: 825 litres - Electric heating: 24 kW - Spray pressure: 4.5 bar - Wash pump: FHE 40-200/75 GLRD SiC/SiC-Viton, 7.5 kW - Level control: LIQUIFANT FTL 260 - Coarse filter: 2 mm - Detergent dosing: Membrandosierpumpe Alpha 1001 Rinse Tank Specifications - Tank capacity: 825 litres - Electric heating: 18 kW - Spray pressure: 3 ...

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! incl. Clean room - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm  ...

AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible.

Linomat LN2 washer with filler, 2 active cleaning heads, Fully automatic, fully electronic KEG interior cleaning and filling machine, for different KEG sizes 15-50 L KEG, for containers 20 ltr. - Performance 35 -40 containers / h The Keganlage runs on Schlankkeg- basket fitting. Build in 1992, very good condition and fully functional, tested by Seegräber GmbH

Powerful spray cleaning for a wide range of parts Also for heavy workpieces From lightly oiled to heavily soiled Further data on request

Clean air extraction HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -geAir filtration by means of filter bags, cleaning motorized, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 250 mm, nominal volume flow: 4,241 m³/h, minimum volume flow: 3,534 m³/h, number of bags: 3 pieces, motor: 4 kW, dimensions (LxWxH): 2,500x1,280x2,500 mm, weight: 630 kg

Cleaning medium: perchloroethylene, treatment chamber dimensions: 690x740x277mm, basket holder dimensions: 400x620x410mm, max. loading weight: 80kg, basket speed: 2-4/min, usable volume tank 1/2: 270/160l, solvent capacity: 450l, compressed air connection: 6bar, control: Siemens SIMATIC OP17, length: 2550mm, width: 1900mm, height: 2500mm, weight: 3.2t, with documentation. An inspection on site is possible.

An HGH ultrasonic cleaning system is available. Chamber dimensions X/Y/Z: 600mm/500mm/400mm, basket dimensions X/Y/Z: 570mm/470mm/290mm, usable volume: approx. 120l, tank volume: 160l, ultrasonic power: 1200W. Documentation available. An on-site inspection is possible.

Washing system for trolleys and rack trolleys ELIONA / CERTEL, type: WR100.125.190 -in good condition- - For frames max. 1,000 x 1,250 x 1,900 mm - Boxes max. 600 x 400 x H 360 mm - Steam, hot water - Heating type: electric - El. Connection: 3x 400 V + N + PE, 50 kW Visits and test runs are possible by arrangement.

Clean air extraction ALKO Power Unit 200P -used air filtration by means of filter bags, cleaning pneumatic, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 200 mm, nominal volume flow: 2,261 m³/h, max. vacuum: 2,174 Pa, number of bags: 2 pieces, motor: 3 kW, compressed air connection: 6 bar, dimensions (LxWxH): 2,300 x 850 x 2,050 mm, weight: 470 kg

A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.

Sheet metal cleaning machine AWS Reini R60L Automatic Feed For sheet metal dimensions 98 x 58 cm For 2, 3 and 4 edge trays Dry cleaning Dimensions LxWxH: approx. 80 x 60 x 105 cm High output with up to 200 sheets/hour Easy operation, care and maintenance Movable on castors (with hold-up)

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h, Additional title: Bottle washing machine, Capacity: 39000 Bottles/h, Length: 12700 mm, Width: 4700 mm, Height: 3500 mm, Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW, Operation / Control: Simatic S7-300, Position: free standing, Base construction: Single-end machine, self-supporting housing on dome feet, Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station, Layer patterns: 22 bottles per basket row

Cleaning machine used Visually and mechanically good condition Fully functional Without warranty _ Purchased as seen Video in operation can be sent on request. Payment of the machine at pick-up or in advance by bank transfer Invoice Amount plus VAT

Cleaning system ROLL RSB 0060-028-0540-03, year of construction 2017, S/N K05385, aqueous cleaning agent, cleaning cell, 2 rinsing cells, drying cell, circulating belt (vacuum pump missing)

Mobile hygiene station / high-pressure cleaner Nilfisk ALTO Food ECOLAB HYBRID TYPHOON KOMPLET REAL Typhoon is a complete mobile hygiene station for professional foam cleaning for the food industry. Year of construction 2019 400 V connection, flow rate 50 l/min, max. 25 bar, max. 70 °C. Fully functional and tested Foam cleaning system for food industry/butchery/dairy Hoses and spray gun included neat condition Stock machine, immediately available! Condition see original pictures.

WE HEBBEN 46 KEER: EuroScaffold rolsteigerframe 75 × 28 × 7 × 6 keer EuroScaffold steigerplatform 190 cm met luik X 2 KEER EuroScaffold leuningframe AGS Pro 190 cm x 1 keer EuroScaffold horizontale schoor 190 cm x 4 keer EuroScaffold diagonale schoor 190 cm x 6 keer Steigerwiel Ø200 mm met stalen as, 500 kg, nylon X 4 TIMES Steiger telescopische stabilisator 200 cm x 2 keer EuroScaffold aluminium kantplankenset X 1 TIME Leuningklemmen X 8 KEER TOTAAL Gewicht: 153 KG x 46 = 7000 KG EN Verstelbare stabilisatoren 200 x 92 keer TOTAAL Gewicht: 9 kg x 92 = 828 kg

A complete Krones bottle cleaning and filling line is available. Throughput: 8000bottles/h, carousel pitch: 161mm, carousel diameter: 1800mm, filling valves: 50. This is a complete rinser and filler monoblock for glass and plastic bottles. Documentation available. An on-site inspection is possible.

WIRBEL K 855 HP 7,5 Industrial Dry Vacuum Cleaner -CE - Identifier -Mint condition -Motor power 5.5 KW -Filter area 1.2 m2 -Tank volume 60 liters -Air flow rate 135 L/sec -Vacuum (vacuum) approx. 300mbar -Suction hose -Connection cable Dimensions: LxWxH 1.2x0.6x1.3 meters / weight 125 kg

A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible.

basket dimensions: 0 control: 0 total power requirement: 0 kW weight of the machine ca.: 0 t dimensions of the machine ca.: m heating capacity: kW ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power (W) 8 ...

Clean air extraction ALKO 200 with FU -used air filtration by means of filter bags, cleaning pneumatic, dust-tested, mobile collection container, frequency converter, pressure transmitter for demand-based control---------- Technical data ----------extraction nozzle: 200 mm, nominal volume flow: 2,261 m³/h, max. vacuum: 2,446 Pa, number of bags: 2 pieces, motor: 4 kW, compressed air connection: Max 8.5 bar, dimensions (LxWxH): 2,280x1,010x2,050 mm, weight: 470 kgQuality info: - complete Basic inspection - complete

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph, Additional title: Single-ended machine, Capacity: 21000 bo/h, Bottles each row: 16 bo/row, Length: 8,64 m, Width: 4,47 m, Height: 1,92 m, Weight: 17900 kg, Formats: 0,5 l NRW-Bottle, Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank , Periphery: S5 controll (HMI Lauer)

Cleaning tank, ultrasonic cleaning basin, ultrasonic cleaner, ultrasonic bath -Manufacturer: Zender, stainless steel ultrasonic cleaning tank with heater, mobile -Basin internal dimensions: 2200/315/H280 mm -Temperature control range: 30 to 110°C -Operating temperature: max. 70°C -Ultrasonic generator: Zhangjiagang Zhongnuo type JYD -Individual components: see photos -Dimensions: 2530/315/H700 mm -Weight: 150 kg

Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main

workpiece weight: 500 kg 0: 65 °C heating capacity: 54 kW 0: 2x300 l total power requirement: 84 kW weight of the machine ca.: . t dimensions of the machine ca.: . m No. 407 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.