clean in place used for sale

70x VKBA3501 SKF 11x VKBA625 SKF 1x VKJC3548 SKF 3x VKJC3960 SKF 13x VKPC84215 SKF 715x OW-4230-825D INA and more

2 servo motors technical data see pictures Condition: unchecked (6)

FAG, SKF and SNFA - Batch of industrial bearings 282KG including super precision bearings

Dematic incline belt conveyor 10300-500-400 RA2347 Conveyor length (FL): 10300 mm (800 mm forward run, 8400 incline segment and 1100 mm arch) Outer width/nominal width (NB): 500 mm Outer width/nominal width with motor: 750 mm Belt width (GB): 400 mm Profile height: 135 mm Climbing belt with curved section Infeed conveyor with overdrive Arched section with 2 adjustable bends Rubberized drive drum Drive: SEW 400 V 0.55 kW Optionally available supports side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) Conveying length in mm: 10300 (800 + 8400 + 1100) Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung  ...

SKF, FAG, INA, NACHI, IKO, NSK, RHP, TIMKEN - Batch of bearings and industrial parts

FAG / IKO / NTN - Batch of various industrial bearings

Measuring table Table size 140 x 130 mm Table height 100 mm max. measuring height 230 mm max. projection 115 mm Column diameter 50 mm Weight approx. 13.5 kg

Product is unused in the original packaging

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Table size 400 mm Table height 410 mm Table adjustable horizontally – vertically Tilt range 0 to 90 degrees Manual angle adjustment. Load capacity Vertical : Up to 8.000 kg Horizontal: Up to 1,500 kg (freestanding) or 4,000 kg with counterbearing Drive table AEG M42953-10 Permanent Magnet DC Servo Motor

SKF / FAG / INA / CR - Batch of various industrial bearings and oil seals

Please note! Without the shelf rack; only the content;

Schaeffler / SKF - Batch of industrial components with grease & lubrication units 190KG

Batch of new industrial mechanical shafts / spindles

FAG / SKF - Batch of industrial bearings 354KG

42 lattice boxes with spare parts for two-wheelers, motorcycles and e-bikes with a total net retail price of approx. 65,000 €. The lattice boxes are also part of the auction! The spare parts are originally for two-wheelers of the Sachs/SFM brand, but some are also suitable for other common brands. Some high-quality engines enclosed and much more. You can find a list in the pictures. Loading free truck

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

Centering device CENTRICATOR Scanning range inside 6 to 220 mm Scanning range outside 0 to 150 mm Scanning range plan 90 to 280 mm Clamping Shank SK 40 Weight approx. 2.4 kg

FAG, SKF, INA - Batch of industrial bearings & components 267KG

In pvc storage case Complete with 2x battery and 1x battery charger

SKF TIH 070m/230V Induction Heater

SKF, FAG and INA - Batch bearings and linear technology 225KG

2008 KRAUSS MAFFEI 420-700-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

Measuring column Length - height 3,000 mm Diameter 190 mm Special steel - hard chrome plated - piston rod of a hydraulic cylinder Support leg - 2,500 mm Weight approx. 560 kg

With footswitch

Product is unused in the original packaging

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

26x 33281/Q SKF 40x FRB12/160 SKF 44x PCM15015580F SKF 100x UL36-000426 SKF 67x FR130/10 FAG 30x HJ2318 FAG 3x 3215B. TVH. C3 INA 71x F-110488 INA 57x F-45398 INA 220x F-45914 INA and more

Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate.

For sale is a Wagner WAC 70 circular saw in excellent condition, including a bundle loader. This high-quality machine is ideal for precise cutting and efficient handling of wood and workpieces in wood processing. Type: Circular saw Model: Wagner WAC 70 Additional equipment: Bundle loader Features of the Wagner WAC 70: Precision: The WAC 70 offers precise cuts for a wide range of wood types and formats. Performance: Robust construction for a long service life and high performance. Efficiency: The integrated bundle loader enables fast and efficient material feed, which significantly speeds up the production process. Operating Voltage: - Main: 400V, 50Hz - Control Voltage without transformer: 230V - Control Voltage with transformer: 25V Rated Current: 23A

KASTOwa C7 + Brio EB702 + Motoman YR-UP130 Upgrade your manufacturing capabilities with this comprehensive industrial automation package featuring the KASTOwa C7 bandsaw, Brio EB702 , and Motoman YR-UP130 industrial robot. This powerful combination is designed to enhance efficiency, precision, and productivity in your operations. Two complete sawing systems, consisting of bundle loader, saw body, buffer magazine, end processing, measuring table (length measurement, concentricity measurement, wall thickness measurement for pipes and marking unit, as well as a robot for loading containers onto the roller conveyor also included (see concept) A sawing system consisting of bundle loader and saw body including parts chute A chip conveyor from Mayfran Motoman Robot Details: Payload: 130 kg Mass: 700 kg KASTOwa C7 Machine Details: Weight: 980 kg Voltage: 400 V, 50 Hz, 3 Ph Power: 11  ...

Rippert HL9-630/1070-Bex Extraction system Type : HL9-630/1070-Bex Position : LG 0 Volume : 27,500 m³/h Pressure Increase : 3,750 Pa Density: 1.2 kg/m³ Power Input : 39.0 kW Temperature max: 40°C Temperature Medium: 40°C Motor Capacity : 45.0 kW Speed : 1,450 1/min (RPM) Max. Speed: 1,450 1/min (RPM) Special Speed: 1,450 1/min (RPM) Capacity: 100,000 m³/h Filter hoses: 462 pcs., 4190x140 mm Ø, PE – needle felt 400 g/m², antistatic, calendered, with test certificate class M, the filter hoses were only completely replaced in 12/2022 Support type: Spiral springs for hanging in tabs of the filter hoses Find more here - / Contact us at -

Windsor Klöckner W2700 - 27780 Injection Molding System Wittmann handling system included Injection Volume: - Strock volume: 20300 cm³ Clamping Force: - Schließkraft: 2700 kN Injection Pressure: - Einspritzdruck: 1360 bar Main Connection: - Network 1: - Voltage: 500 Volt - Frequency: 50 Hz - Total Power: 418 kW Cooling Water: - Volume: Not specified - Max Temperature: 32°C Weight: - Total Weight: Not specified Find more here - / Contact us at -

Printed circuit board 734 QI (PCB) / control PC with integrated touch display on the insert, for Bobst Alpina 110 II matic. PCB Printed circuit boards 734 QI / control PC with integrated touch display on the feeder, for Bobst Alpina 110 II matic. Manufacturer numbers and replacement numbers: BSA07230000BW / BSA07230000BT / BSA07340000TH

Measuring tripod - heavy duty version Measuring height 290 mm Measuring range transverse arm 260 mm Diameter of measuring column 40 mm Cross arm diameter 28 mm Base plate 500 x 235 mm Base plate thickness 35 mm Weight approx. 38 kg

Machine name: Inversion system for liquid polymers Manufacturer: Reiflock Type: Reifomat 500 Year of Make: 1999 Conveying / Dosing of: Liquid Polymers Capacity: Polymer flow: 0.12 - 2.5 l/min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Curb weight: Approx. 120 kg 2Ygvwomvc Tech. Documentation: Yes Note: Achievable flocculant concentration: 0.07 – 2.5 % Electrical connection: 380 V / 16 A connected load: approx. 2.2 kW Condition: Used Price: On request

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

Caterpillar C9.3 - Unused - 340 kW - NGH

Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will  ...

A curing injector from Günther is sold Type: PI 17 Year of construction 2016 Capacity: approx. 300 to 500 kg/ hour Equipped with 17 needles in 2 rows, needle size (standard) approx. 4.0 mm The injection quantity is infinitely variable from 2 to 25 % Machine is in very good condition and ready for immediate use Price from stock 6000€ net

MAX DIAM 200

Key data: 700 kN, 132 g/PS, 35 mm

Injection moulding machine Arburg 370S-700-290 Item number: 232 Availability: In stock Year of Make: 2008 Brand: Arburg Specifications Injection weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tiebar spacing: 370x370 mm Clamping plate size: 510x510 mm Tool installation height min.: 200 mm Plate spacing max: 600 mm Control: Selogica Language: German Power: 23.9 kW Hours: 67848 h Weight: 3300 kg Dimensions: 3.8x1.5 m Funnel: No Euromap: Yes Air Valve: Yes

Kuka KR 16-2 Year of Make: 2010 Payload: 16 kg Reach: 1611 mm Control: KRC2ED05