clean in place used for sale

optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

Machine type: Tumbler Manufacturer: Inject Star Model: Tumbler 2200 liter Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: 170x285x190cm Electrical power: 4.5kW

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Transformer, converter, inverter, three-phase autotransformer -Indramat: Transformer DST/S 2.5 -Primary: 440/415/380 V -Secondary: 220 V - 10.5 A -Power: 2.5 kVA -Dimensions: 235/120/230 mm -Weight: 15 kg

Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm

Tank made of 316L stainless steel with a capacity of 400 liters. Top bottom klopper welded to the body with two tubulatures with flange. Two tubulatures with flange on the sides for visual level placement. Bottom klopper welded to the body with flange for discharge from the tank. Mounted on 2 posters. General characteristics: Maker STAINLESS STEEL BOILERMAKING Material Stainless steel 316L Year of manufacture 2000 Specifications: Volume 400 l approx. Background type Klopper Envelope 2 posters Outer diameter body 614 mm Body height 1500 mm Body height + backgrounds (total: 2200 mm)

Boiler tank made of iron by INDUSTRIAS IBAIONDO. Air charge pressure: 0 bar Maximum temperature: 40 ºC General characteristics: Maker INDUSTRY IBAIONDO Guy Conventional hydropneumatic accumulator Material Iron

Measuring device for speed or frequency, tachometer, cutting speed measuring device, hand tachometer, revolution measuring device -Manufacturer: Jaquets Indicator 100REVs 10 m -Accessories: see photo -Case: original case -Dimension box: 120/85/H30 mm -Weight: 0.3 kg

Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg

Control amplifier, servo motor control -Manufacturer: Indramat -Type: TRM3-W23-E0/523 -Module: TSS8/532 -Number: 1x controls available -Price: per piece -Dimensions: 305/145/H310 mm -Weight: 7.1 kg/piece

Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

PLC control, machine control, module -Number: 3x available -Price: per piece -Dimensions: 190/130/H20 mm -Weight: 200 g

Plant number 701-246; medium used radionuclide Krypton 85 Type: X1114 Specifications: Connection voltage: 40V +/- 10%, 3 phases, 50 Hz, N, PE Basis weight measurement: measuring range 30-600 μm PA; Measurement accuracy +/- 2; Sigma range (+/-0.4% but maximum +/- 0.4 μm), Measuring gap 10 mm Traverse: maximum useful width 1970 mm, traverse speed 0-10 m/min Ambient temperature: sensors 0-50°C, traverse 0-50°C, control cabinet (control) 10-35°C Humidity max. 90% without condensation

PLC control, machine control, module -Manufacturer number: 1125 -Serial number: 109-178-4201 -Dimensions: 190/130/H30 mm -Weight: 0.3 kg

PLC control, machine control, module -Number: 3x available -Price: per piece -Dimensions: 190/130/H20 mm -Weight: 200 g

PLC control, machine control, module -Make number: 2529 and 2530 -Serial number: 109-998-4201b-2 -Dimensions: 190/130/H20 mm -Number: 2x available -Price: per piece -Weight: 200 g

PLC control, machine control, module -Product number: 5638 -Serial number: 109-264-4201b-1 -Dimensions: 190/130/H20 mm -Weight: 200 g

Premix Scale INOX 100 kg with underbuilt rotating flap and 6 premix cells INOX diameter 500 mm, height 2000 mm as a package price 1.800,- €

Centrifugal pump manufactured in stainless steel.

Stainless steel centrifugal pump manufactured by INOXPA.

Crank winch, Dunkraft, diamond jack, steel winch -Hexagon socket: 32 mm -with: counterweight -Dimensions: 730/400/H110 mm -Weight: 9.8 kg

Video camera -aus: warehouse liquidation -Color camera -Dimensions: Ø 24 x 75 mm -Weight: 120 g

Video camera -from: Warehouse clearance -Color camera -Dimensions: Ø 24 x 75 mm -Weight: 100 g

Hydraulic pump, oil pump, gear pump -Internal gear pump -System: Trochocentric -Operating pressure: 175 bar -Delivery rate: 25 cm³/rev -Dimensions: 180I168/H135 mm -Weight: 6 kg

USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: dividing head -with: hand crank -Dimensions: 390/400/H200 mm -Weight: 28 kg

Hydraulic unit, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs ZSMV/2 pivot beater -Max. Pressure: 70 bars -Motor: 1.5 kW 1405 rpm -Number: 1x available -Dimensions: 465/260/H520 mm -Weight: 58kg

Control amplifier, servo motor control -MDC 9.20B -10V/1500 -Number: 3x controls available -Price: per piece -Dimensions: 310/140/H265 mm -Weight: 6.8 kg/piece

Control amplifier, servo motor control, programming module -MDC 9.20B -10V/1500 -Number: 1x controller available -Price: per piece -Dimensions: 310/140/H265 mm -Weight: 6.8 kg/piece

scoring head, glass cutting table, glass cutting table, glass cutting machine -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Computer monitor, control unit, control unit, keyboard, screen, control -Manufacturer: INONET -Type: Radiance-15 -Dimensions: 400/300/H45 mm -Weight: 3.5 kg

Circuit board for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS -Type: ZSB circuit board Impala 6x -Weight: 0.1 kg

Precision bending beam for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS S100-5N -Type: NJ Y123/101 -Weight: 0.1 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø 35 mm -Number: 1x motors available -Price: per piece -Dimensions: 670/206/H245 mm -Weight: 50 kg/piece

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -max. speed: 1500 rpm -Shaft: Ø mm -Quantity: 1 piece available -Dimensions: 670/206/H245mm -Weight: 51 kg/piece

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor, Permanent Magnet DC Servo Motor -Max. Speed: 2000 rpm -Shaft: Ø mm -Number: 1x motors available -Price: per piece -Dimensions: 685/142/H190 mm -Weight: 31 kg/piece

Inauen Maschinen AG Diptank Model: VC999 Stainless dip tank, chamber size 600mm L x 400mm W x 300mm H, digital temp control, mobile, 3Ph

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 10 kW -Max. speed: 6000 rpm -Shaft: Ø 42 mm -Protection class: IP 23 -Number: 1x motor available -Dimensions: 880/380/H320 mm -Weight: 136 kg

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Manufacturer: ifm -Type: Interface AC1375 -Number: 4x stations available -Price: per piece -Weight: 0.4 kg/piece

INTENSIVE Nozzle Filter JC 20/1-2 BS 22.6 Filter Area Attachment filter without funnel 20 baskets ø 160 x 2250, control unit S 6022-220 V Diaphragm and solenoid valves new, filter bags new Housing approx. 1.35 m x 1.35 m x 3 m Space requirement horizontally to change hose approx. 1.8 m

Laser Prima Industrie mod. Platinum 1530 Year 2008 CNC Primach P20L Working hours about 25.000 Visible running.