135,571 used machines on RESALE, but how to find them? Machine Search
Lift table with hydraulic power unit Operating pressure 110 bar IP 55 Auction-ID: A1-50529-17
without hydraukikaggreget without electrics The device is therefore sold as defective Auction-ID: A1-50529-19
Blade thickness: 35mm. Not included the goods on the welding table Auction-ID: A1-49889-207
Blade thickness: 50mm. Not included the goods on the welding table Auction-ID: A1-49889-200
Blade thickness: 40mm, equipped with 3 steel trestles, length: 2990mm. Not included the goods on the welding table Auction-ID: A1-49889-203
Top thickness: 20mm, equipped with 2 steel supports, length: 2500mm. Not included the goods on the welding table Auction-ID: A1-49889-202
1x work table (300x125x96cm) with steel top; 1x work table (120x100x82cm) with wooden top Auction-ID: A1-49889-37
Blade thickness: 35mm, equipped with 3 steel supports, length: 2500mm. Not included the goods on the welding table Auction-ID: A1-49889-199
What's Included? A luxury; one off; high quality; bespoke and purpose built to order from new, mobile coffee bar/cart/station (designed to match it's espresso machine). It's on wheels for transportation and onsite placement. Fabricated in steel and powder coated in plain white, with a stainless steel work surface and polished steel mid section wrap around. It's in very good condition, with only some signs of wear & tear. It can be left plain white or be branded. It has an optional tall lollipop light (see photo) and built in lights for work surface and ambiance. On the work surface, it has a built in sink (cold water). Bar Dimensions Height 1m (excluding tall lollipop-style light. With tall light 2.2m ) x Width 1.6m x Depth 0.68m La Marzocco 2EE, 2 Group Linea classic espresso machine
This is the "Comfort" version that has a 2m long sliding table and outrigger that can handle 8x4 sheet material. Connects to 16A (blue plug) 240V single phase supply. Clean used condition showing normal signs of workshop use, all functions fully working. Used in a home workshop only by one person so has been looked after. The spindle moulder has been used once only. Comes with the following; 1. Spanners and allen keys as original supply. 2. Hammer boxed set of spindle moulder tooling 3. Hammer heavy duty clamp for work holding on the sliding table. 4. 8 saw blades of various tooth counts. Hammer and Bosch brand. One blade has carbide tip damage but you might want to get it repaired, the others will benefit from sharpening. 5. used planer knives that may have some life left in them, I was going to try honing them. 6. Printed Manual 7. Digital readout for the thicknes ...
Consisting of: 1 whey drain table, 17 moulds, 1 whey drain tray Auction-ID: A1-50564-26
sliding table length: 3200 mm; cutting width at the fence: 1350 mm; cutting width at the cross cut: 3200 mm; cutting depth: 125 mm; scoring unit: ja; sawblade diameter: electric; tilting adjustment sawblade: electric; adjustment fence: manuell; readout sawblade tilting: Scala; read out sawblade height: -; read out fence: Scala; read out crosscut stop: Scala; sawblade diameter: 400mm; number of speeds: 3000 / 4000 / 5000 U/min; motor power: 7 kW; motor brake: yes, automatic; suction connection: 80mm und 120mm; machine length: 3400mm; machine width: 2000mm; weight: 900kg;
sliding table length: 3000 mm; cutting width at the fence: 1000 mm; cutting width at the cross cut: 3200 mm; cutting depth: scoring unit: ja; height adjustment sawblade: manuell / Kurbel; tilting adjustment sawblade: manuell / Kurbel; adjustment fence: manuell; readout sawblade tilting: Digital; read out sawblade height: -; read out fence: Scala; read out crosscut: Scala; sawbladediameter: 450 mm; number of speeds: 4000 U/min; motor power: 4 kW; motor brake: ja - automatisch; suction connection: 80 mm und 120 mm; machine length: 3000 mm; machine width: 2100 mm; weight: ca. 1100 kg;
sliding carriage length: 3200 mm; cutting width with rip fence: 1200 mm; cutting width at the cross cut: 3450 mm; Schnittiefe: scoring unit: yes; height adjustment: manual / crank; tilt adjustment: manual / crank; rip fence adjustment: manual; display saw blade tilt: digital; display saw blade height: -; display rip fence: scala; display at the cross cut: Scala; saw blade diameter: speeds: 3200 / 4200 / 5000 U/min; motor power: 5 kW; motor brake: yes - automatically; suction connection: 80 mm and120 mm; machine length: 3350mm; machine width: 1800 mm; weight:
sliding table length: 3300 mm; cutting width at the fence: 1000 mm; cutting width at the cross cut: 2800 mm; cutting depth: 170 mm; scoring unit: nein; height adjustment sawblade: hydraulisch; tilting adjustment sawblade: hydraulisch; adjustment fence: manuell; read out sawblade tilting: Scala; read out cutting height: Scala; read out fence: Scala; read out crosscut: Scala; sawbladediameter: 500 mm; sawblade speeds: 2800 / 4000 / 5500; motorpower: 5,5kW; suction connection: 80 und 120mm; machine lenght: 4000 mm; machine width: 2200 mm; weight: ca. 1300kg;
Manufacturer: FERMAT Model: WFC 10 CNC Year: 2020 Condition: Used Stock number: 9555 Control System: FANUC Series Oi-MP Operating hours: 1100 h Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 5000 kg Maximum spindle speed: 3000 1/min X-axis travel: 1250 mm Y-axis travel: 1250 mm Travel travel Z-axis: 1250 mm Cone: ISO 50 Spindle diameter: 100 mm Machine height: 3308 mm Machine length: 3822 mm Machine width: 5883 mm Machine weight: 17735 kg
Operating terminal for Fette tablet press Manufacturer Greases Ident No. 2138599 Series No. 4502990047/009
Underfloor circular saw, cut-off saw, miter saw, panel saw, table saw, circular saw, construction site circular saw -Manufacturer: Hanning, table saw, construction site circular saw -Type: HTK 315/2-Q62 -Motor power: 2.2 kW / 2720 rpm -Voltage: 380 V / Connector pole-changing -Saw blade: max. Ø 315 mm -Cutting height 75 mm -Stop holder: without stop -Dimensions 890/720/H900 mm -Weight: 43 kg
including accessories electric high/low Auction-ID: A1-50076-1072
Consisting of wooden desk with leather-look upholstery with dimensions 210 x 93 x 76 cm complete with 2x office chair 2x wooden wall unit with leather-look upholstery with 1x size 184 x 47 x 75 cm and 1x size 183 x 47 x 56 cm Wooden conference table with leather-look upholstery with dimensions 180 x 95 x 75 cm complete with 5x ditto conference chair And 2x various drawer unit Except content, issued according to instructions Auction-ID: A3-50009-1020
Exercise Bikes - ProSprinter Exercise Bike with Tablet - Quantity: 1 unit - Condition: Brand new Technical specifications - Dimensions: 109 × 56 × 107 cm - Maximum user weight: 120 kg - Adjustable seat and handlebar height - Adjustable resistance level - Bottle holder included Tablet features - Processor: MT6592, 8-core - Operating system: Android 5.1 - Memory: 16 GB - Battery: 4000 mAh - Resolution: 1280 × 800 px - Connectivity: Wi-Fi, Bluetooth - Built-in speakers - USB and headphone ports - Internet access for videos, apps, and browsing Functions - Displays time, speed, distance, and calories - Integrated multimedia and connectivity features Auction-ID: A7-50653-8
RAU EDP table 1023 mobile / mobile workstation trolley Mobile IT and workstation table from RAU Arbeitsplatzeinrichtungen with robust worktop made of wood-based material. Due to the working height of approx. 1,100 mm, the table is particularly suitable as a standing workstation, e.g. for PC workstations in the workshop, assembly, production, warehouse or quality assurance. Equipped with an open storage compartment, lockable base cabinet with two doors, side document storage made of metal mesh and four swivel castors for flexible use. Technical data: Manufacturer: RAU Arbeitsplatzeinrichtungen Designation: EDP table 1023 mobile Product no.: 07 1023F.11 FA number: 485388 Year of manufacture: 02/2016 Dimensions (L × W × H): 1,100 × 800 × 1,100 mm Colour: light grey / RAL 5010 gentian blue Worktop: Engineered wood Base cabinet: 2-door, lockable Storage Compartment: Open ...
Exercise Bikes - ProSprinter Exercise Bike with Tablet - Quantity: 1 unit - Condition: Brand new Technical specifications - Dimensions: 109 × 56 × 107 cm - Maximum user weight: 120 kg - Adjustable seat and handlebar height - Adjustable resistance level - Bottle holder included Tablet features - Processor: MT6592, 8-core - Operating system: Android 5.1 - Memory: 16 GB - Battery: 4000 mAh - Resolution: 1280 × 800 px - Connectivity: Wi-Fi, Bluetooth - Built-in speakers - USB and headphone ports - Internet access for videos, apps, and browsing Functions - Displays time, speed, distance, and calories - Integrated multimedia and connectivity features Auction-ID: A7-50653-6
Exercise Bikes - ProSprinter Exercise Bike with Tablet - Quantity: 1 unit - Condition: Brand new Technical specifications - Dimensions: 109 × 56 × 107 cm - Maximum user weight: 120 kg - Adjustable seat and handlebar height - Adjustable resistance level - Bottle holder included Tablet features - Processor: MT6592, 8-core - Operating system: Android 5.1 - Memory: 16 GB - Battery: 4000 mAh - Resolution: 1280 × 800 px - Connectivity: Wi-Fi, Bluetooth - Built-in speakers - USB and headphone ports - Internet access for videos, apps, and browsing Functions - Displays time, speed, distance, and calories - Integrated multimedia and connectivity features Auction-ID: A7-50653-10
Exercise Bikes - ProSprinter Exercise Bike with Tablet - Quantity: 1 unit - Condition: Brand new Technical specifications - Dimensions: 109 × 56 × 107 cm - Maximum user weight: 120 kg - Adjustable seat and handlebar height - Adjustable resistance level - Bottle holder included Tablet features - Processor: MT6592, 8-core - Operating system: Android 5.1 - Memory: 16 GB - Battery: 4000 mAh - Resolution: 1280 × 800 px - Connectivity: Wi-Fi, Bluetooth - Built-in speakers - USB and headphone ports - Internet access for videos, apps, and browsing Functions - Displays time, speed, distance, and calories - Integrated multimedia and connectivity features Auction-ID: A7-50653-7
Exercise Bikes - ProSprinter Exercise Bike with Tablet - Quantity: 1 unit - Condition: Brand new Technical specifications - Dimensions: 109 × 56 × 107 cm - Maximum user weight: 120 kg - Adjustable seat and handlebar height - Adjustable resistance level - Bottle holder included Tablet features - Processor: MT6592, 8-core - Operating system: Android 5.1 - Memory: 16 GB - Battery: 4000 mAh - Resolution: 1280 × 800 px - Connectivity: Wi-Fi, Bluetooth - Built-in speakers - USB and headphone ports - Internet access for videos, apps, and browsing Functions - Displays time, speed, distance, and calories - Integrated multimedia and connectivity features Auction-ID: A7-50653-9
RAU EDP table 1023 mobile / mobile workstation trolley Mobile IT and workstation table from RAU Arbeitsplatzeinrichtungen with robust worktop made of wood-based material. Due to the working height of approx. 1,100 mm, the table is particularly suitable as a standing workstation, e.g. for PC workstations in the workshop, assembly, production, warehouse or quality assurance. Equipped with an open storage compartment, lockable base cabinet with two doors, side document storage made of metal mesh and four swivel castors for flexible use. Technical data: Manufacturer: RAU Arbeitsplatzeinrichtungen Designation: EDP table 1023 mobile Product no.: 40990017 F.11 FA number: 000581515 Year of construction: 09/2018 Dimensions (L × W × H): 1,100 × 800 × 1,100 mm Colour: light grey / RAL 5010 gentian blue Worktop: Engineered wood Base cabinet: 2-door, lockable Storage Compartment: ...
Width of the workbench: 1350mm, equipped with vice and a side table equipped with assembly stand, make: chalice Auction-ID: A7-50677-216
Width 56 cm Year of construction 2017 Inclined roller table for alignment Height adjustable H version with round plug Delivery date: Immediately
used
GeneralUniversal Milling Centre; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal750 mmCross600 mmVertical520 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightWeight approx.8000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only! Type of Measuring system Direct measuring system Table surface Ø 800 x 620 mmMaximum load (table centre) 350 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) -10/+95 x 0,001 degreeMode for positioning only Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge ...
used
GeneralUniversal Milling Centre; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal750 mmCross600 mmVertical520 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightWeight approx.8000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only! Type of Measuring system Direct measuring system Table surface Ø 800 x 620 mmMaximum load (table centre) 350 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) -10/+95 x 0,001 degreeMode for positioning only Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge ...
used
GeneralUniversal milling machine, with compound Guideway construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataType of main driveAC Drive power (100% DC)14,5 kWDrive power (40% DC)20,3 kWSpeed range20 - 14000 rpmSpindle taperBT 40 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410! Table surface 630 x 500 mmCentre bore 30H6 mmMaximum load (table centre) 300 KgSlot width 14 mmNumb ...
used
GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Toolchangertoolchanger Type of magazine Chain Type of gripper Double gripper Number of tools 30 Max. tool weight 8 KgMax. tool length 300 mmMax. tool diameter with occupied adjacent pockets 80 mmMax. tool dia. with free neighbouring pockets 130 mmNC swivel rotary tableSwivel Rotary Table for simultaneous ma ...
used
GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 16 kWDrive power (40% DC) 21 kWTorque (100% DC) 85 NmTorque (40% DC) 111 NmSpeed range 20 - 15000 rpmSpindle taper HSK-A 63 Clamping System HSK-A 63 Toolchanger with set up station for tool loadingNumber of tools 60 Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360 ...
used
General2-Axes Universal Turning Center with driven tools, C-axis and Y-axis - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmSlide 1Longitudinal stroke540 mmTransverse stroke242 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-5000 rpmPower max. (40% DC)5,65 kWFloor space/WeightDimensions (L x W x H)2,8 x 2,3 x 1,85 (3,95 x 2,3 x 1,85) m mWeight approx.4400 KgAlternative Speed TurningTechnolog ...
used
GeneralCNC Turning Centre with C axis and tool drive; Control: CNC control SIEMENS 840D ERGOLine Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke800 mmMax. Turning Length800 mmClamping chuck diameter max.250 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)4,17 x 2,69 x 1,99 mWeight approx.6500 KgChuck rinsing device, outsidechuck rinsing device, outside (m ...
used
GeneralUniversal turning-/milling center; Control: SLIMline® Control SIEMENS 840D sl, w/o CELOS Working areaSwing diameter over guide ways500 mmTurning diameter400 mmMax. Turning Length1100 mmBar diameter max.65 mmWork spindle (left)Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmBench speed485 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)8,8 kWDrive power (40% DC)10,5 kWTorque (100% DC)73 NmTorque (40% DC)90 Nmlocking moment850 NmSwivelling range+/- 120 degreeTool magazineType of magazineChain Number of tools60 Max. tool diameter78 mmMax. tool-Ø with free adjacent pockets125 mmFloor space/WeightDimensions (L x W x H)5,19 x 2,11 x 2,47 mWeight approx.11200 KgBASICBasic, consisting of: - Basic ...
used
General2-axes universal turning center with driven tools and C-axis; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode
used
General2-axes universal turning center with driven tools and C-axis; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed550 mmSwing diameter over X linear guideways320 mmMax machining diameter300 mmClamping chuck Ø210 mmX travel232,5 mmZ travel410 mmMain drive 1Type of main driveAC Drive power (100% DC)9 kWDrive power (40% DC)11,7 kWSpeed range-4500 rpmTorque (100% DC)108 NmMax. torque (40% DC)140,4 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.5500 rpmPower max. (40% DC)5,44 kWTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemperatur. Mechanical oil mist extractor type AFS 600Mechanical oil ...
Table circular saw for regular professional use. Industrial motor for continuous running, galvanized steel table with extension, trolley on bearings, adjustable stop from -45° to +45° . Condition: New, never used, in its original box. Specifications (plug optimachines.com): • Power supply: 400 V • Motor power: 2.1 kW • Blade diameter: 315 mm • 90° cutting height: 90 mm • 45° cutting height: 50 mm • Max. cutting width with stop: 200 mm • Table length: 800 mm • Table width: 550 mm • Suction tubing diameter: 100 mm • Dimensions (L x W x H): 1350 x 1250 x 1000 mm – net weight 60 kg Supplied with: Base with wheels, Travel handles, Sliding carriage with miter stop, Table extension, Parallel fence and side stop, 36-tooth carbide saw blade (size: Ø 315 mm), Saw blade guard with suction nozzle. Carton size: 94 x 67 x 46 (cm) Auction-ID: A1-50698-12
Title of the lot: CANOL shaping and cutting table – Guillotine + many accessories – Pastry/biscuit line Brand: CANOL Model: 2001 SNC Year: 1993 CANOL professional dough shaping and cutting table, Italian manufacture, year 1993. Currently integrated into a production line, coming out of a SEEWER RONDO 5-head sheeter, and announced to be functional. It receives a laminated dough strip and carries out calibration, cutting, shaping and cross-cutting operations by guillotine. Known equipment: long conveyor belt, longitudinal cutting system, output guillotine and cutting accessories. Manufacturer: CANOL 2001 SNC – Italy. Professional stainless steel construction. Machine currently in production. Visible and tryable by appointment in the biscuit factory. Auction-ID: A1-50735-1
Lot title: RONDO / SEEWER Professional Rolling Mill – Bakery Pastry Laminating Table Brand: RONDO RONDO Professional Laminating Table / Rolling Mill RONDO – SEEWER, intended for bakery, pastry, biscuit or food laboratory. Visible features: Rolling mill on frame, two laminating belts, electronic control, thickness adjustment, protective grid and robust structure. Automatic flour mill and automatic thickness adjustment indicated. Belt width indicated: 80 cm. Second-hand material with normal traces of use. Sold as is, as visible in the photos. Auction-ID: A1-50735-4
WEISS Rotary indexing tables TC120G incl. drive/control packages (Lenze / WEISS EF371A) 1. Rotary indexing table Manufacturer: WEISS Type: TC120G 6 stations Weight per unit: 22 kg Shaft with multi-hole pattern for tool holder Standard Weiss gear unit for indexing applications (classic cam turntable) 2. Motor WEISS / Končar Motor Type AZKA 56L-6T B14P78 Power 0.06 kW 230/400 V (50 Hz) 880 / 1100 min-1 Weight 5.9 kg 3. Control/power package Lenze EPL 1923I Drive PLC Additional Lenze power/control modules WEISS EF371A Control card – Type EF371A – Year of construction 2010 – Weight 3 kg Wired on base plate Complete electrical unit available Technical data:Manufacturer: WEISS Type: TC120G 6 stations Year: 2010 Weight: 22 kg Motor: WEISS / Končar AZKA 56L-6T– 0.06 kW– 230/400 V– 880/1100 min-1 Control: – Lenze Drive PLC EPL1923I – WEISS EF371A control card – incl. ...
Mobile table saw for the workshop or construction site. Galvanized steel table, rolling carriage with miter stop, blade tiltable 0–45° via handwheel. Condition: New, never used, in its original box. Specifications (plug optimachines.com): • Power supply: 230 V • Motor power: 1.6 kW / 2.2 kW • Blade diameter: 315 mm • 90° cutting height: 83 mm • 45° cutting height: 60 mm • Max. cutting width with stop: 290 mm • Table length: 800 mm • Table width: 550 mm • Suction pipe diameter: 100 mm • Dimensions (L x W x H): 1600 x 600 x 1050 mm – net weight 53 kg Supplied with: Base with wheels, Travel handles, Sliding carriage with miter stop, Table extension, Parallel and miter stop, 24-tooth carbide saw blade (size: Ø 315 x 3.6 x Ø 30 mm), Saw blade guard with suction nozzle. Carton size: 88 x 62 x 44 (cm) Auction-ID: A1-50698-11
Bessey table clamp 16x Hold down table clamps BS. Clamping force up to 10,000 N. Swivels and is infinitely adjustable in height. For drilling and light milling work. Lever mechanism for quick clamping and releasing. Dimension 800 x 600 x 450 ( LxBxH in mm ) Weight approximate 65Kg Auction-ID: A7-50717-49
Double scissor lift table in epoxy painted steel: lifting by hydraulic pedal, descent by handle, 2 steering wheels with brake, anti-overload safety. Condition: New, never used, in its original box. Characteristics (sheet optimachines.com): • Max. load: 500 kg • Min. height: 340 mm • Max. height: 900 mm • Length of the top: 855 mm • Width of the top: 500 mm • Diameter of the wheels: 127 mm • Net weight: 87 kg Carton size: 95 x 53 x 45 (cm) Auction-ID: A1-50698-28
maximum number of results exceeded
please refine your search
350 € 
