cl used for sale

-for the cleaning of scrap electronics type 1 by means of compressed air -Health dust can be removed by the suction system -Volume flow at least 1000-15000 m3/h -can also be used for the venting of picture tubes -Weight 210 kg -Outer dimensions 950 x 1200 x 1900 mm -Retract height 850 mm -Ball roller 920 x 1050 mm -Ø fresh air/extraction each 125 mm -Ø ERGO-grip a 220 mm -Manual available

Safety railing clamp for screwing Safety on every structure These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success. Doka handrail posts provide comprehensive safety • against fall hazards • on the structure and the formwork • thanks to their high quality (hot-dip galvanised) • conform to EN 13374 Class A Convenient and easy to mount Multi-functional as they can be used in many different situations ? maximum safety with easy assembly ? no squared timber waste

Filter cloth holder / Towel holder Material PP NEW available for all Kammerfitlerpressen / filter presses Other spare parts on request

Intestinal clamp HANDTMANN type HV 60-8 For Handtmann VF 50, 80, 100, 200, 300 and all numbers in the series VF 600 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Tank internal dimensions (lxwxh) 700x550x500mm Exterior dimensions (lxwxh) 880x730x750mm Basket dimensions (lxwxh) 640x490x80mm Ultrasound peak power 8000W 40 kHz operating frequency (others available) max. capacity 175Liter Heater 6KW 400V/50 Hz Clip on lid or hinged cover possible also available rinsing baths or dripping plates.

Load capacity up to 12,000 kg Grab content from 1 m 3 up to 10 m³ Make: all reputable manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

This cube has 3 magnetic clamping area. Dimension each area: Length: 2,000 mm Width: 2,000 mm Height: 2000 mm

Fugenreiigungsmaschine for stone floors Working width 50 cm Powered electric 2.2 kW L x W x H: 120 x 60 x 80 cm Weight 130 kg Built approx. 2001 The machine is little used, in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Rotary Lathe with Staylog Bar and Longitudinal Cutting System

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Working Length: 3200 mm

Ultrasonic cleaner GT85 GT 2000-3P built in 2008. The washing tub is made of 316L stainless steel, the other tubs are made of 304 stainless steel and the supporting structure is made of structural steel. The volume of washed products should not exceed (LxWxH) 2400 x 600 x 600 mm Industrial washer - technical data: - external dimensions (LxWxH): 6400 x 4400 x 2800 mm - usable dimensions: chamber I (washing and phosphatizing): 2800 x 800 x 900 mm - useful dimensions: chamber II (rinsing): 2800 x 800 x 900 mm - usable dimensions: chamber III (drying): 2800 x 800 x 900 mm - power consumption: 63 kW - total weight: 2500 kg Bathtub 1: - preparation type: Ruster P02, Roklin P11 - pH: 2-4 - bath operating temperature: 20-60 degrees C - total bath capacity: 2000 l - maximum product weight: 500 kg - maximum product volume: 250 dm3 Bathtub 2: - type of preparation: tap water  ...

High-pressure steam cleaner

Key data: 3000 , 1500

Technical data: Height 300 mm Length 3.000 mm Width 1,500 mm

Specifications: width 2000 mm height 1200 mm Depth of 850 mm

hedge clipper Fischer KM 150, for branch thickness up to 35 mm, like new. Also with Outrigger Fischer DZ 1-3500 available, equally as good as new.

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm As for RÃ?HM + GRESSEL vices available.

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1502 AV Motor: DS 400V suction power: 500 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car; NEW

Round-table HAU RK 6-800, with 6 working spindles and 3 polishing units, further details and sightseeing on request; cleaned and ready for use

Rotary table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized lifting adjustment, liquid paste system (pistols + pressure cover), incl. control cabinet Price and further details on request.; good condition, ready for immediate use

Ultrasonic cleaning systems, washing systems as single or multi-chamber systems, with or without handling system, can be realized in various standard size, special needs can be realized

Sweeper and scrubber Tennant 8210 diesel 100 Combination of suction Sweeper and wet scrubbing machine with Kubota diesel engine, High emptying, infinitely variable hydrostatic travel drive, automatic functions. 2 x available, paid hours approx. 220 and about 1020. More information, photos and offer on request!

temperature: 200?C clear width: approx. 400 mm clear height: approx. 400 mm

WIRO closing machine BURN Verfügbar: immediately

Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Magnetic clamping plate Size: 450 x 150 mm new

Washing machine Pero3/u (2 tank) with odolejaczem

RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620

Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use

; ready for operation

Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use

Different length 4000 - 4600 -5200 mm Head Clipper 1200 mm

Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction power: 300 m3/h End pressure: approx. 150 mbar (abs.) Performance: 12 months Condition: New ashoer: suction filter; Operating instructions Delivery time: short-term; ready for use

; ready for operation

Claw vacuum pump dry manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction power: 250/300 m3/h final pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructions Delivery time: short-term; ready for use

Baeckereikuerschrank BSM 900 S Stainless steel performance for plates 600 x 800 Digital temperature display from - 3 to + 10 Cenergy saving system EHT Ready with 20 pairs of support rails Cadt agent R 134 A Connection 230V/506Watt Mass: 740 x 1010 x 2070 mm, BxTxH DGUV V3-geprueft immediately Available! with performance ; ready to ship

Complete tilt clamping system 2 stueck tipping plates, stud and system covers, stoppers, pads, clamping strips, hoehenbloecke and much more. Length by width 2 piece 500400mm Holes 16mm Number of holes xxx stueck Distance of holes 50mm More data and photos on request Price and further information on request Special price

Laser marking laser marking system, Manufacturer GSI Lumonics Type XYMark, consisting of laser and suction. Geraet untested More information on request Special price

WIELAND IS 75 R Mobile Spaene extractor extractor system Manufacturer WieLAND Type IS 75 R Consisting of suction system type IS-75 R and Cooling agent tank, type FS 300, built 1986 Dimensions (LxWxH) approx. 1500 x 1200 x 1700 mm Weight approx. 550 kg Special price

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

Intermittent motion closing machine for vials. Machine incl. capping feeding system from vibrator. Output: upt to 5400 units/h.

Rated power: up to 2000 kg/h bust contact length: 2x2 m Contact time: 5 - 50 sec. Engine power: 1.5 (2.0) kW (PS) Electrical connection: 220V 50Hz (1 phase) Electrical fuse: 16 A Plug type: F (=SCHUKO) Dimensions: Laenge: 2 6 70 mm width: 825 mm Height: 1 400 mm Weight: 350 kg High fruit acceptance: 840 mm High fruit ejection: 700 mm Fresh water connection: 3/4 ; New machine - best condition

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use