cl used for sale

Key data: 360 mm, 360 mm, 870 mm

4 side tensioning tower with a height of 870 mm incl.

Offer 25435 Specifications: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Left + right screwed rectangular tube 200 mm each - Thickness of the top plate approx. 80 mm - 6 T-slots in table surface length 3500 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 35 / 60 mm - T - groove depth approx. 60 mm - Space required: L 3500 x D 2100 x H 350 mm - Weight approx. 4200 kg

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

Parts cleaning device, IBS, – used - : Price per unit: 350.-€ (net) Manufacturer: IBS Scherer GmbH Type: Type F2 Year of Make: 2003 Serial Number: 44675 Power connection: 1/N/PE 230V, 50Hz, Nominal Inputs: 18W, 0.2A Load capacity: 60kg Width: 800 mm Net weight: 50 kg Barrel size: 50 liter keg Frame Material: Sheet Steel Height: 1125 mm Cleaning type: Special cleaner Cleaning basin width: 790 mm Cleaning basin depth: 540 mm Condition: good Available: immediately Location: Frankenberg camp / Saxony

Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Stationary industrial vacuum cleaner Power 2.2 KW Air flow rate 300 m/min Suction port 40/50 mm Weight 30 kg

Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement.

Features: Total height 1600 mm Length 2600 mm Width 1900 mm Description: M.Nr.: 1699 334 Drum speed: 3,700 rpm Solids: 3.5 kg/dm3 Engine data: Type: 180 M-4/2; 380V; 35/46 Amp.; 16.5/22 kW; 50 Hz. Dimensions decanter: Length: 2,600 mm Width: 1,000 mm Height: 1,600 mm Pump dimensions: Length: 1,900 mm Width: 950 mm Height: 830 mm

For sale is a clothing rack system over 2 floors, length 25 m; width 18m Semi-automatic filling with mobile carriages, can be loaded up to 100KG per carriage. The system has been dismantled by us and can be taken over immediately

For sale is a Veit Tunnel Finisher 8657 with inbound and outbound transport Price from stock Külsheim 19.500 € In addition, the steam generator and compressor can be can be requested

1 dedusting with ring ionization with the option of installing the system on an existing transport. Cleaning perpendicular to the direction of flow of the automatic spray gun. With integrated electro-mechanical linear drive. 2 compressed air-operated, rotating blow nozzles move in an oscillating manner across the direction of the workpieces. The dedusting is provided with two side exhaust hoods through which the dust-free air is removed from the workpieces. 1 ring ionization for the elimination of static charges on the workpiece surfaces, attached to the oscillating / rotating Nozzle holder, including high-voltage power pack (not in EX) with voltage display and connection cable between ionizing bar and power pack The dust extraction system must be connected to a dust extraction system, min. 5,000 sqm / h. - Producer Venjakob - Year of construction 2009 - Working width 1300 mm - Feed sp ...

A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible.

Stock# U2452 Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen.

Used, in very good condition Packaging type : Tetra Prisma Aseptic Package volume : 1000,00 ml Shape of packaging : Squareline

Mag Schymanski Bottle Washing Type Sirio 7-10 is a powerful bottle washing machine for industrial bottling plants. It ensures effective internal and external cleaning of glass and PET bottles and meets the required hygiene standards before filling. Adjustable parameters, robust construction and easy maintenance make it a reliable solution for beverage production. Control range 3,600-8000 bph Machine design Stainless Steel Method of operation Continuous Max. bottle diameter 75 mm Max.Bottle Height 290 mm Bottles in machine 1,720 pieces Bottle cell carrier 172 Pieces Cell division 95 mm Chain Pitch 140 mm Power consumption 12.33 kW Fresh water verb. 2,300 ltr./hr at 1.5 bar Heat demand Hourly output x 14.01 = demandin Kcl. Curb weight 12,000 kg Full weight 19,000 kg Length 7,000 mm Width 2,095 mm Height 300 ...

The bran finisher increases the flour yield during the grinding process by separating the flour from the bran. It is used for soft wheat, durum wheat and rye. It has a production capacity of up to 1.8 tons per hour, or 3.6 tons per hour if you use the double machine.

Packaging type Tetra Prisma Aseptic Shape of packaging Squareline Packaging volume 1000,00 ml Voltage 3N 400/230 V Frequency 50 Hz

For sale is a functioning bottle washer. The facility is in good general condition according to its age. Technical data: • Year: 1995 • Capacity: 2,000-3,000 bph The system is equipped with liter cells. If you have any questions, please feel free to contact us at any time.

For sale is a functioning bottle washer. The facility is in good general condition according to its age. Technical data: • Year: 1995 • Capacity: 2,000-3,000 bph The system is equipped with liter cells. If you have any questions, please feel free to contact us at any time.

Inv. Num. : 8877 Type: POW229-2 Producer: NOTUS POWERSONIC Created: 2011 Parameters: Control system: IMATIC S7 1200 Power consumption: 9.2 kW Equipment: Safety Relays Light cabinet

Size 3,620 x 1,600 mm Thickness of the plate 245 mm with substructure - working height 780 mm Longitudinal grooves 34 mm Cross grooves 18 mm Weight approx. 5,000 kg PRICE ON REQUEST!

• For aluminium tubes (double seam, triple seam) • 10 tube holder stations • Output 25 - 60 tubes/min • For tube diam. 11-52 mm depending on tube holder format set • Tube sheath length 50-250 mm • Total tube length with cap max. 280 mm • Dosing 2.0-400 ml depending on dosing pump • 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml • 2 cam discs • 2 filling nozzles, diam. 12 + 19 mm with anti-drip device • Tube feeding magazine • Tube centring station • Print mark control (alignment of the tube to the print image) • Under-level filling • 1-line embossing, with embossing numbers • 1 heated hopper with electric heating, 1 single-walled hopper • 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm • Contactor control • Connection 400V/50Hz • Without transfer belt to the cartoning machine • Has worked in lin ...

Dubbele rubberen wielen op elke hoek 1 draaibare as Afmetingen: 4000 x 2000 mm Hoogte: ± 670 mm

Ultrasonic Precision Cleaning Washer Hello Today I would like to offer you a used ultrasonic precision cleaning washer for sale. This facility is from the year of construction 2015 but very well maintained and in top condition. We can offer this system today at the price of the former new price. If you are interested, please contact us. The system can still be visited under power up to 14 KW.

table length: unterschiedlich mm table width: unterschiedlich mm table height (lateral area): unterschiedlich mm weight: ca. 240 kg Description : - Special set for SIEGMUND 28 clamping tables - original SIEGMUND accessories () included : - 1x 28 mm mobile tool trolley - 30x quick release bolts with short twist lock - 8x universal stop 150 L - nitrided - 4x universal stop 225 L - nitrided - 8x stop and clamping angles 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 750 G left - nitrided - 1x stop and clamping angle 750 G right - nitrided - 1x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 500 G right - nitrided - 4x stop and clamping angles 300 G left - nitrided - 8x prism Ø60-135° burnished - 16x Professional screw clamp - Nitrided - 6x Professional screw clamp 45°/90° - Nitrided - 4x universal stop 300 - nitr ...

Complete line for washing/sterilizing/filling/sealing open funnel/spike ampoules, consisting of: Bosch RRU 3064 washing machine - Capacity max. 18,000 ampoules/h - Ultrasonic cleaning in heated water bath - Internal and external cleaning with hot pumped water/compressed air/fresh water/compressed air - Transfer of ampoules to sterilization tunnel - Shared control cabinet with HQS and ALK 5080 - PLC Siemens S5 Bosch HQS 3420 sterilization/depyrogenation tunnel - Capacity max. 18,000 ampoules/h - Drying, sterilization, and depyrogenization of ampoules at a hot air temperature of 150-350°C - Cooling of ampoules to max. 10-15°C above cooling air temperature - New tunnel conveyor belt in August 2021 Bosch ALK 5080 filling/sealing machine - Max. output 18,000 ampoules/hour - Pre- and post-gassing - Filling - Preheating - Sealing via skewer removal, sealing gassing  ...

DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.

Keg Washer/Filler - Second Hand 2 head keg washer filler complete with beer carbonator manufactured by NT Teknik Type NM Keg 1-1 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

X16374-151 Automatic Riveting Machine for M8 claw nuts Manufacturer: NAGAYAMA, Model: CB/NHF & NHF T-nuts, Year of Manufacture: 2015 Serial no YN-2015-10 Made in Japan

weight: . kg taper MK: . Thread capacity: M24 0 Various lengths The technical data is provided by the manufacturer or operator and is therefore non-binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Closure / feeding conveyor system Gassner Ferrero Year of manufacturing: 2000"

Vertical clamp for windows ITALPRESSE

Hydraulic clamp couple for chair assembly CAMAM mod. SIPM - CE - Hydraulic pump power HP 5.5 (kW 4.0) - Productivity 60-120 assambled chairs/hour - Dimensions mm 3500x1300x2200 H - Weight kg 2060 - CE rules - Voltage: 380/50 - Year: 1998

A manual clipping machine Tecno Brianza Brevetti Clippatrice H2 is available. Products: sausage products, casing types: natural casings/artificial casings/synthetic casings, clipping capacity: approx. 600pieces/h, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1750mm, weight: approx. 100kg. On-site inspection is possible.

• For plastic tubes (HDPL, LLDPL) • Hot air sealing • 9 tube holder stations • Output max. 40 tubes/min • For tube diam. 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosing 20-220 ml depending on dosing pump • 1 rotary valve dosing pump 10-100 ml (1 additional as spare) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling device • Print mark control (alignment of the tube to the print image) • Embossing 1 line • 2 tube holder format sets: tube diam. 25 mm, tube length 90 mm, tube diam. 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labelling machine 05-0179

Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible.

An automatic double clip machine (casing clipper) Alpina/Tipper Tie for single, chain and ring products is available. Caliber range: 20mm-80mm, clipping capacity: 200/min, clip system: double clip, pitch: 12mm/15mm, machine dimensions X/Y/Z: approx. 1600mm/1150mm/2000mm, weight: approx. 500kg. An on-site inspection is possible.

Turbo Coolant Cleaning System Type 15 Suitable for bypass cleaning of max.80l/min. Emulsion at an operating temperature of +10C to max + 60C Nameplate centrifuge: AZF-T15.5917 Centrifuge Number: 25115 Plant number: 15181 Operating voltage:400 V/50Hz Control voltage: 24 V DC Weight Br. 6132 kg Year 2018 Original price: 36.600 € Centrifuge defective, needs to be repaired.

Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01.

Key data: 320 mm, 320 mm

The Erowa UPC Chuck ER16841 is a reliable and high-quality pneumatic zero-point clamping system. Precision: By positioning the clamping system accurately, you can be sure of precise results, regardless of the complexity of the workpiece. Flexibility: The chuck is versatile and adapts to the needs of your projects. Efficiency: The pneumatic function allows for fast and safe clamping, greatly increasing productivity. Technical data Model: Erowa UPC Chuck ER16841 Type: Pneumatic Zero Point Clamping System Condition: Used further inventory at: inventar-verkauf.de/id/alesco

Vise with Erowa reference system for ITS chucks Without damage and fully functional There are two keeper varinates available (see last picture). When requesting, please indicate whether it is the left or right model. There are 15 of each variant available. Billing: Invoice is issued. According to §19 para. 1 UStG, no VAT is charged (small business regulation) If you have any questions, please feel free to contact us. Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer

For sale are two Erowa ER32 collet holders. Price is per holder. Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

For sale are 48 square holders with Erowa reference system (F-tool) Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

For sale are 12 brass square holders from Erowa Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

For sale is an Erowa control mandrel for aligning the radial, axial and angular position of chucks. Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

The natural casing welding system can be used on filling tables or on automatic filling lines of all manufacturers

Tuttnauer T-Edge 11 Tabletop Autoclave The T-Edge 11 fully automatic sterilizer is much more than just an autoclave Your skills are needed in your practice and your time is a crucial factor. T-Edge therefore frees you from unnecessary effort. Meets strict international standards Clinically proven applications High-resolution touchscreen Innovative technology Easy-to-use interface Elegant design Excellent user experience Sterilization at the touch of a button Select the desired program and press "Start" The autoclave takes care of everything else - "click and go". Technical data Kammerabm. ø x L: 280 x 460 mm Chamber volume: 27 litres External dimensions D x H x W: 500 x 500 x 580 mm Shell dimensions (D x H x W): 421 x 207 x 20.5 mm Power supply: 50/60Hz, 230V-1Ph+N+GND Connections: 1 Ethernet port, 2 USB ports, Wi-Fi, integrated connection for automatic water ...

Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a cleaning and disinfection device (RDG) that has been specially developed for the mechanical reprocessing of instruments in medical and dental departments. It integrates important functions such as active drying and media collection directly into the device to save space in the practice. Dimensions: The device measures approx. 59.8 x 81.8 x 67.8 cm (W x H x D) and thus fits under a standard 60 cm worktop Capacity: The optimized reprocessing chamber can accommodate instrument sets of up to 45 patients per batch Active drying: Reliably protects instruments from corrosion and recontamination through integrated external and internal drying Integrated process media: Cleaner, neutralizer and rinse aid are stored in a drawer directly in the device to save space Manufacturer: Melag Type: Melatherm 10 DT Vo ...

Basic pallets for MAKINO A77 /81 Dimensions 630 x 630 mm with T-slot spacing 125mm Several available !

1 of un-used Warner Electric EC650 electro clutch assembly, KHS PN K0090039960, Warner Electric EC-650 clutch CL EC-650-28MM 24V SPECIAL (PN: 5281-111-003 / 5281-271-021), fitted with KHS 47-tooth sprocket PN: K0090039134.