136,836 used machines on RESALE, but how to find them? Machine Search
Height=1.22 m, Overall length= 0.56 m, Overall width= 0.57 m, Net weight= 545 kg,
Height=1.8 m, Overall length= 0.87 m, Overall width= 1.1 m, Net weight= 120 kg,
Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible.
Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water
Height=1.85 m, Overall length= 1.18 m, Overall width= 0.9 m, Net weight= 122 kg,
Height=1.93 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 147 kg,
Floor cleaners, floor preparation products, floor coating -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: cleancraft, industrial vacuum cleaner type wetCAT 131 IRH -Connection: 230 volts -Power: 2.4 kW -Dimensions: 500/470/H1100 mm -Weight: 10 kg
Clipping machine Manufacturer: Technopack Tipper Tie Made of stainless steel and durable industrial plastic Easy to clean thanks to smooth surfaces Machine dimensions: Width: 100 cm Depth: 78 cm Height: 180 cm Power: 0.1 kW Voltage: 2.5 A Compressed air: 4–6 bar / 0.4–0.6 MPa
POLY CLIP MACHINES: FCA 80 FCA 120 FCA 140 FCA 160 ICA 8700
Manufacturer: Turbo Clean Type of Machine : Parts cleaning machine Model : T10-400 Year of manufacture: 2007 Machine Weight: 550 kg Maximum Fill Volume: 18 L Maximum Load Weight: 15 kg Installed Power: 7.0 kW Mains Voltage / Frequency: 3 x 400 V / 50 Hz Pneumatic Connection: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines
Adapter Claas Scorpion on three-point hitch, - with adjustable lower link hooks and removable trailer coupling, - Net weight approx. 190 kg, - KAT 3
Description Item # 9272 - CLASSIFYING CUTTER for sizing / granulating material to controlled sizes via shearing against screens. Manufactured by MUNSON MACHINERY (USA) Model M6-SS Year 2018 3 Phase, variable speed Cutter arrangement: 3 staggered 50mm wide (150mm total) 4-tooth angled cutter heads constructed of 400 series hardened stainless steel, with a single replaceable, stationary hardened stainless steel cutting bedknife Screens: 2 x replaceable #304 stainless steel Classifying bedscreens, 4mm and 6.35mm perforations Previously used to accurately size nuts & sugar candy for inclusion in chocolate bars Overall dimensions 450mm x 450mm x 1500mm high
Description Item # 9339 - CLUSTER MACHINE Manufactured by SELMI Year 2020 produces chocolate-based clusters containing nuts (hazelnuts, pistachios, almonds...) as an additional ingredient. capacity 30-35kg/hr
Description Item # 9363 - CLUSTER FORMER / CEREAL BAR FORMER Compact system for shaping cereal mixes in any shape. The moulding system designed for processing and moulding cereal masses Not only rectangular products can be formed, but e.g. domes, triangles, bars etc. Manufactured by WOLF Spezialmaschinen Model: WCF 200 200mm working width Working capacity depends on the weight of the product. It can be 50 kg per hour. Year of manufacture 10/2023 3 formers. 1 is with 5 buttons, 1 is with 6 buttons in a row, 1 is for bars 2 in a row. 400V/230 V/ 50 HZ
SFT CLAMP-RAIL Clamping System Manufacturer SFT Model CLAMP-RAIL Condition untested Location 72589 Westerheim DE Lot 173
The system is used to automatically clean empty vessels / containers / bottles before the filling process by means of movable air nozzles (pure filters). The KOSME JET CLEAN G 16/960 1T UP turns the empty containers (overhead) and removes loose particles and impurities by blowing in filtered air via movable nozzles. The machine is used to remove loose deposits from the containers before they enter the filling system. Capacity: up to 6000 bottles/h Dimensions: 2500 x 2500 mm Machine weight: 1600 kg Connection: 3x400 V, N, 50 Hz Air pressure: 6 bar Water pressure: 3 bar
Y.J.: 1988, in robust version with rectangular flange attachment, suitable for temperatures up to 120C, as good as new condition.
Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW
DATA ON THE MACHINE Machine type: Front forklift / forklift Manufacturer: CLARK Model: CGC 70 Built: 2001 Condition: very good (used) Price 22,500 Euro net plus VAT Location Warstein , Germany Reference M-CLA-0820 Description We offer you a used forklift from the manufacturer Clark. Very low centre of gravity (bandages tyres) and very compact forklift. Very good converter, perfect for complicated machine transports. Technical data Payload 7000 kg Weight 9100kg Lifting height 3300mm Tree width 1400mm Fork length 1800mm 2 gear gearbox Engine hours 2595h (demonstrable) Machine comes first hand, all repairs were carried out by a specialist company. The paint is original! Rental from mid-September is possible. The hours may of course vary, as the forklift is in use! Our offer is aimed at professionals who are covered in accordance with the Trade C ...
used
CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,
used Watermaster Classic suction excavator / dredger construction year: In 1993 working weight: approx. 19 metric tons transport length: 12.4 m transport height: 3.2 m transport width without side pontoons: 3.2 m pontoon frame height: 1.2 m spoon: 360 l shovel: 700 l
CALIBRATING MACHINE Mod. SAC SUERI CLS 1150 max. working width mm.1150 1 tape: roller diam. mm.300 Engine power hp 20
KSB Wilo, Grundfos, Allweiler pumps in stock. Incl. VFD,. from 1KW to 37KW, 1m / h up to 350m / h designation, see list.
FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C
Make: CLIMAVENETA Type: WRAT/SL 0802 Power: 200 kW (100KW) Refrigerant: R407C Built: 2006 2 pcs. compressors Make: DWM Copeland Semi-Hermetic Type: D6SJ1-400X-AWM/D One circle is defective, others are OK. Price on request
consisting of: 1 x ultrasonic screening, manufacturer: Sodeva, type: separ class BT 1034 1 x electrostatic precipitators, manufacturer: AT conveying devices, type: 520 1 x vacuum conveyors, manufacturer: Volkmann, type: VR 170 - F 200 2 x mobile collector.
Cold water high-pressure cleaner with 7.5 kW output - 270 bar pressure and 15 l/min. Including Hotbox 300bar Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protect ...
Cold water high-pressure cleaner with 4 kW output - 170 bar pressure and 14 l/min. Including hotbox up to 200 bar. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink p ...
Cold water high-pressure cleaner with 2.2 kW output - 150 bar pressure and 8 l/min. Including hotbox up to 200 bar. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - ...
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Rotary vane vacuum pump oel circulation lubricated single-stage Status: used, over-prueft, functional Manufacturer: Rietschle Type: CLFH 141 (01) engine: 400V equipment: mineraloile nominal suction digesters: 140 m3/h end pressure: <0.5 mbar (abs.) Including: user manual oel filling
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...
Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...
Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...
The model M3 differs from the offered multi-blade and surround circuits by its solid and compact design, as well as by the simplicity in operation. Each individual machine element is able to withstand high workloads without risks while constantly utilizing the respective full engine power. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 390 Feed speed m/min 6-48 Engine power PS 35 25,5 KW CONNECTED LOAD 58 AMPER The highest application security available on the market is achieved by SCM's exclusive system. The backfall protection of the workpiece and the protection against splinters during processing ensure maximum safety. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 250 Feed speed infinitely variable rpm 6-48 Engine power kW (HP) 18,5 (25)
CLIMAVENETA AWR-MTD2-XE.0031MS Brand:CLIMAVENETA Type:AWR-MTD2-XE.0031MS Stock number:M23-4626 Cooling capacity:9.2 kW Application:Cooling / Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:3,5 kg Voltage:220 Volts Power consumption:5,19 kW Dimensions:900 x 420 x 1240 mm Weight:155 kg Year: New/unused Number in stock:3 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller/heat pump with a scroll compressor, water pump and expansion vessel. This machine is equipped with a separate control unit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q= 12,3kW at +40/45°C and +7°C). Visit our website: used-refrigeration
Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Engine power of the saw blade 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balancing and durability. Shock-absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. Carbide circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system by means of new ball bearings with double dust protection and automatic lubrication system. CE-comp ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pallet roller conveyor/ roller conveyor/ pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive Plant consisting of: 12 segments 9x approx. 5.75 meters in length 1x approx. 5.30 meters in length 1x approx. 2.00 meters in length 1x approx. 0.95 meters in length Each element is equipped with its own motor. Total length: approx. 60 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roll diameter: approx. 80 mm Axes/roller spacing: approx. 80 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: blue Pallet guide included Including SEW motors 1.1 KW Includes feet - height adjustable Price per meter ...
maximum number of results exceeded
please refine your search
100 € 
.JPG)
