127,865 used machines on RESALE, but how to find them? Machine Search
KD sheet metal cleaning machine Type: KD Plaster for 2-edge sheets double brush Restitution Emergency Stop Switch Stainless steel cladding on rolls
For sale used lining machine for aluminium caps PMV 100 /produced SACMI Italy /. Good working condition
used
DAMAS GOLFA 1327IE, FINE CLEANING MACHINE Pre-climb classifier module E/R, main climb classifier module E/R, screening unit module E/R, air regulation, spare screens etc.
used
Damas Entgranner, racket, dosable, speed adjustable, 15 KW, 1470 rpm
Mechanized table. Sizes: 4500x1220x360mm. Screws for levelling. T slots of 60x35mm. Posibility of sell with a sliding radial drill.
used
Grain cleaning Schmidt Seeger TAS 206 Capacity 200 t/h Wheat, spare sieves etc.
length: 1980 mm width: 550 mm height: 1390 mm weight of the machine ca.: 1373 kg dimensions of the machine ca.: 1980 x 550 x 1390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!
REF-0 MANZINI (COMACO) CAN SEAMER FOR 3KG CANS Automatic can seamer manufactured by Manzini (Comaco) Model: A-350 Can size: 3kg Fitted with 3 seaming heads Power: 12HP Dimensions: 1,800mm width, 2,500mm length, 2,600mm height. Optional: 15-valve vacuum filling system for 3kg cans (vacuum pump included). Filling system dimensions: width 2,100mm, length 1,200mm, height 2,400mm.
table length: 900 mm table width: 600 mm table height: 700 mm groove width: mm : mm weight of the machine ca.: 90 Kg dimensions: 0,9 x 0,6 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request
Spare parts for the cleaning system HAMO / Amsonic, type T-840 consisting of the following parts: - Feeding transformers - Parvalux gear motors - Diaphragm pumps & valves - Drain valves - Pressure pipes - Level switch - Dosing pumps - Flow meter - PH probes - Conductivity transmitter
with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent
with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.
with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm
I sell a body press for furniture element mount RAMARCH PN31. Year of construction 2002. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.
length: 1000 mm width: 570 mm height: 1200 mm weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,x0,6x1,2 m used angle plate in very good condition with t-sluts and additional bores 22 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I sell a body press for furniture element mount RAMARCH PN31. Year of construction 1998. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.
WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW ...
I sell a body press for furniture element mount RAMARCH PN31T. Year of construction 1997. Material size 2500 x 1300 x 600mm Version with rear transport track for finished elements. Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.
Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment
maximum number of results exceeded
please refine your search
40 € 
 (1).jpg)
