cl used for sale

Manufacturer: Cloos Model: Romat 350 Year of Manufacture: 2007 Type of Machine : Robotic Welding System Operating Hours: approx. 90,000 h Type: Robotic Welding System Included: GLC 353 MC3/R Welding Power Source Included: MRW 380-31 Welding Torch 35 degrees Find more here - / Contact us at -

Clean Air System AOP Desktop, type DT 500 DeskAir PHI, For your workplace, whether in the office or in the home office, cleans the air and improves the indoor climate., - Length of the UV-C tube: 5 but has the, - power of 2.5, - Flow rate of the integrated fan:, - without blower, - Voltage: 230 V incl. voltage converter, - (integrated in the desktop) and 12 V plug, - Power: 12 volts 1 amp, - Case material: polymer, -, power: Room volume/ capacity: 74 m³ in 24 h, Dimensions / weight: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg, The machine has 40 stone removing plates, each with 50 holes.: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg

A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible.

turning diameter over bed: 1050 mm turning diameter over slide rest: 640 mm turning length: 10000 mm turning dia. in gap: 1310 mm spindle diameter: 120 mm speed: 6-500 (x16) U/min voltage: 380 V total power requirement: 30 HP weight of the machine ca.: dimensions of the machine ca.: m 4-Jaw chuck, Ø 1.000 mm Steady Rest, Ø 700 mm 2 Axis Sony D.R.O. 4 Way toolpost Coolant system Rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refurbished 2022 Travel distances: X= 350 mm, Y= 250 mm, Z= 256 mm Travel of U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 (150 in the bath) mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.30 μm Medium contour tolerance: +/- 6 μm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with autom. Wire threading and rethreading after wire breakage

Aircooled chiller CLIMAVENETA MECH IB G07/S 27Y 27.7 kW Cooling capacity: 27.7 kW / 7.88 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi AVB52FLAMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO-G 25-180-10-F02 I, expansion vessel. Dimensions: 0.56x1.46x1.7 m. Weight: 250 kg. Working hours: 41 h. Condition: Outlet

Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 18Y 15.6 kW/17.2 kW Cooling capacity: 15.6 kW / 4.44 tons (12/7 — 35°C) Heating capacity: 17.2 kW / 4.89 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02I, expansion vessel. Dimensions: 0.56x1.46x1.21 m Weight: 185 kg Working hours: 0 h. Condition: New

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgPre-setting PackagePre-setting Package: - tool ...

Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...

Used machine CNC turning-milling center Machine type: DMG MORI CLX450TC Control:DMG MORI SLIMline® Siemens Operate Year of Make: 2022 Location: Germany #0011281 Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Facilities Main Drive Spindle 1/2 17KW 40% - 5000rpm - Turning-Milling Spindle HSK63 10,5KW 40% - 12,000rpm - tool magazi ...

Used machine Machine Type: CNC Turning Center Model No.: CLX450V4 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Fanuc Year of manufacture: 2023 #001354 TECHNICAL DATA: Turning diameter max. approx. 400 mm Turning diameter standard approx. 310 mm Chuck size approx. 260 mm Turning length approx. 755 mm Rod diameter max. spindle/chuck approx. 80/78 mm Turret stations approx. 12 X-axis approx. 276 mm Z-axis approx. 830 mm Y-axis approx. 120(+-60) mm Tailstock approx. 800 mm Spindle speed approx. 4000 rpm Speed AGW max. approx. 4000 rpm Rapid traverse X/Z approx. 30/30 m/min Rapid traverse Y approx. 22.5 m/min Footprint L x W x H approx. 4.30x2.45x2.30 m (with chip conveyor) Machine weight approx. 6,250 kg Main spindle A2-8" 17 / 25.5 kW (100/40% ED), 4,000 rpm - 3-jaw chuck - Differential Compressive Stress for the Main spindle - Foot control ped ...

Unused Endress+Hauser Smartec CLD18 Conductivity measuring system., Order code: CLD18-1457/0, Firmware version: 02.00.09, Measuring range: 200uS/cm - 1.000 mS/cm, Temperature: -10 ... 110°C, Pressure: 13 bar, Type of Machine: Conductivity measuring system

Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm

Hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Motor: 80 x 60 x 40 cm

The APV Cleanline CL3/078/20 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,780 liter per revolution. Maximum nominal capacity: 33,7 m3/h. Inlet connection: 80 mm. Outlet connection: 71 mm. Maximum product pressure: 7 bar Maximum pump speed: 720 rpm. Maximum temperature: 110 °C. The pump is used in a dairy for product pumping. The current motor with this pump is 5,5 kW - 1.430 rpm - 400 V - 50 Hz - 11 ...

Hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc. Article number: 10886801., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm

Unused Inlet Device, Clamp coupling for Tetra Pak 618 - 718 - 818 Separators., Ref 22 - Part No 548412 01 - Inlet housing, Ref 23 - Part No 538247 04 - Clamp coupling, Ref 24 - Part No 538248 03 - Gasket, Ref 25 - Part No 541709 80 - Elbow pipe, Type of Machine: Inlet device, clamp coupling

Unused hydrodynamic coupling which transmit mechanical power from the motor to the driven machine via fluid flow by two bladed wheels positioned face to face. The primary wheel is connected to the motor and acts like a rotary pump, while the secondary wheel is connected to the driven machine and acts like a turbine. Power transmission is proportional to the fill level in the working circuit. As a result of the mechanical separation of the drive and driven sides, the hydrodynamic coupling transfers the power wear-free, simultaneously dampening torsional vibration and torque shocks in the drive chain. These clutches are used in different kind of GEA Westfalia Cream Separators / Skimmers / Bactofuges, like model MSA 200 / MSB 200 / MSD 200 / CNB 215 / CND 215 etc., Type of Machine: Clutch Cream Separator / Skimmer, Weight: 45 kg, Dimensions: 80 x 60 x 40 cm

Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3

Roller length 1820mm Roller diamter 145mm Rubber thickness 9mm Rubber hardness SHORE 50A Working plane height 910mm Max passage between rollers 120mm Forwarding speed 15,2 m/min Requested air Bar 4/8 Motor power 0,37 kW

Product description: - used - in working order - Manufacturer: Wabäma - Model: Circumat Classic Elektronik 380.260 - Year of construction: 2005 - Type of current: Three-phase - Operating voltage: 400 Volt - Control voltage: 24 Volt - Nominal power: 750 W - Exterior dimensions W.: 100 cm, D.: 70 cm, H.: 107 cm For details see pictures.

KOMO GRAIN MILL FIDIBUS CLASSICOur classic with a revolutionary grinder design that ensures the smooth interplay of forces and a pleasantly smooth operation. Solid local beech wood with classic wood mortise on the outside and self-sharpening millstones made of corundum ceramic and powerful 360 watt industrial motor on the inside.360 watts, grinds 100 grams of wheat per minuteSuitable for soft and hard cereals as well as spices, legumes and coffeePerfect for a household size of 3-5 peopleGrinder: Corundum/ceramic infinitely adjustableYou get a

VIBRATING SCREEN 2 OUTLETS, Support structure made of painted carbon steel, Screen dimensions 1500x500 mm, n.2 material discharge outlets, upper screening frame 8 mm., closed at the start for 200 mm, with flow deflector flaps, AISI 304 stainless steel mesh, Drive system comprising 0.75 kW, 1 HP B3 P4 400 V 50 Hz electric motor,, eccentric drive unit., Fixed side and top safety guards,, Electrical system with start/stop switch and emergency stop button., Safety side protection carters, Instructions manual, CE, electrical drawings., If you need anything different please give us the following details., HEIGHT - LENGTH - SCREEN HOLES - NUMBER OF SCREENS - CAPACITY in kg/h, Standard classifying surface is 1500×500 mm. (x 1.000 mm H) which covers most extruders up to 1300 kg./h, but you can have longer surfaces when a cooling action is needed, particularly for PVC, or for higher capacity extr ...

Aircooled chiller CLIMAVENETA MECH IB G07/S 15Y 14.93 kW Cooling capacity: 14.93 kW / 4.25tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-08-F02I, expansion vessel. Dimensions: 0.43x0.91x1.4 m. Weight: 125 kg. Working hours: 38 h. Condition: Outlet

Aircooled chiller CLIMAVENETA MECH IB G07/S 23Y 21.1 kW Cooling capacity: 21.1 kW / 6 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB36FCPMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 1 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO-G 25-180-10-F02 I, expansion vessel. Dimensions: 0.56x1.46x1.21 m. Weight: 190 kg. Working hours: 0 h. Condition: New

Aircooled chiller CLIMAVENETA MECH IB G07 40Y 38.2 kW Cooling capacity: 38.2 kW / 10.86 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi AVB66FLAMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Stratos PARA-C 25-180-12-T02, expansion vessel. Dimensions: 0.66x1.7x1.7 m. Weight: 300 kg. Working hours: 0 h. Condition: New

Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 15Y 13.5 kW/15.3 kW Cooling capacity: 13.5 kW / 3.84 tons (12/7 — 35°C) Heating capacity: 15.3 kW / 4.35 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02, expansion vessel. Dimensions: 0.43x0.92x1.4 m Weight: 150 kg Working hours: 83 h. Condition: Outlet

Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 27Y 25.8 kW/27.2 kW Cooling capacity: 25.8 kW / 7.35 tons (12/7 — 35°C) Heating capacity: 27.2 kW / 7.74 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi AVB52FLAMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02, expansion vessel. Dimensions: 0.6x1.46x1.71 m Weight: 260 kg Working hours: 0 h. Condition: New

Aircooled chiller/Heat pump CLIMAVENETA MEHP IS G07 0071 60.1 kW/69.9 kW Cooling capacity: 60.1 kW / 17.09 tons (12/7 — 35°C) Heating capacity: 69.9 kW / 19.88 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi BVK128FBАMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Dimensions: 1.1x2.1x2.4 m Weight: 750 kg Working hours: 0 h. Condition: New

Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 23Y 19.7 kW/23.8 kW Cooling capacity: 19.7 kW / 5.6 tons (12/7 — 35°C) Heating capacity: 23.8 kW / 6.77 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB36FCPMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 1 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02I, expansion vessel. Dimensions: 0.56x1.46x1.21 m Weight: 215 kg Working hours: 1 h. Condition: New

Inv. Num. : 9039 Type: QIROX QRC 350 Producer: CLOOS Created: 2017 Parameters: Control System: V6-9 Advanced Maximum arm reach: 3400 mm Maximum load capacity: 15 kg The workstation consists of 3 stations and the following components: CLOOS QIROX QRC 350 robot Track Optical barrier Workpiece Positioner

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg

Rotary vibrator, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, trowal system, continuous vibrator, vibration conveyor, oscillating conveyor -Manufacturer: circlon, round vibrator Trowal vibrator with soundproof hood -Total volume: 230 liters -Type: CLS-230 -Working container: elastically mounted -Working basin width: 250 mm -Outlet: approx. 200 x 260 mm -Working basin height: 510 mm -Equipment: manual separating flap, infinitely variable engine speed via variator gear, liquid connection -Machine for: deburring, polishing, rounding edges -Transport dimension: 1700/1600/H2240 mm -Total weight: 1150 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, vacuum unit -Manufacturer: Fezer, Vacufix CL15 V vacuum pump with storage container -Suction capacity: 15 m³/h / 1400 rpm -Drive: VEM 0.75 kW -Dimensions: 1040/460/H750 mm -Weight: approx. 90 kg

Glass fibre, glass fleece, laminate, glass fibre material -Manufacturer: Spheretex, sphere core glass fleece material for laminating -Type: sphere core SBC IP Thickness 6.0 mm Width 100 cm 1 roll -Type: BÜFA -Advanced Core CLM Thickness 6.0 mm Width 127 cm 1.27 m² 3 rolls -Price/Delivery: complete -Transport dimensions: 600/400/H1280 mm -Weight: 12 kg

High-intensity cold-light illumination system for macroscopic applications, lamps, luminaires, lighting, cold-light device, cold-light lamp -Manufacturer: Classen Co, cold light device cold light lamp type L 151 -Voltage: 220 V -Lamp: 15V/150W -Hole for the optical fibers: Ø 15 mm -Dimensions: 260/165/H190 mm -Weight: 5.6 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Cloos, mains interference filter -Type: NEF FS5825 -Dimensions: 265/75/H50 mm -Weight: 0.7 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear stacker, triplex mast -Manufacturer: Clark EML, forklift mast triplex mast type 7000 T -Load capacity: 5000/800 kg -Lifting height: 7500 mm -Height: 3860 mm -technical data: see photo type plate -Recording/Dimensions: see photos / technical drawing -Dimensions: 3730/1300/510 mm -Weight: 2100 kg

Gas metal arc welding machine, arc welding system, MIG/MAG welding system -Manufacturer: CLOOS, Qintron water-cooled MIG/MAG welding machine -Type: Qintron 400 -Max. welding power: 400 A -Water-cooled -Wire feed case: Cloos FC 100E-KIT 4-roller drive -Accessories: incl. ground cable, gas valve, hose assembly (see photos) -Dimensions: 1100/700/H1240 mm -Weight: 181 kg

Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system -Manufacturer: Wuxi Oulongyu Automation Technology, granule conveyor vacuum suction conveying system -Type: OLY-FS300 -Dosing device: OLY CLY-FT20 -Individual components: see photos -Quantity: 1 device available -Dimensions: 860/800/H2360 mm -Weight: 244 kg

General SKU390X1024 MakeHuzap TypeOktabin inliner closing machine Mach.No.20-7547 Main Features MaterialMild steel Motor5.5 KW Specified Features - Miscellaneous Motor5,5 kW, 400 volt MaterialMild steel Information Year of construction2020 LocationBarneveld Floor space4,32 x 2,20 m Total height3,50 m Weight1700 kg CEcheck Extra SpecificationsThe machine is used to weld/heat-seal (close) plastic inliners (bags”) in octabin containers. It is a mobile (movable) welding/sealing fixture that clamps and tensions the inliner foil and then performs the sealing weld. Application: heat-sealing/welding octabin inliners (plastic bags) Design: mobile/movable welding fixture (clamping + tensioning + sealing) Seal beam: 2200 mm Compressed air: 3.5 bar Air consumption: ~10 Ndm³ per welding cycle Drive system: lifting/lowering frame via gearmotor (SEW SA67 DRN80M4, 0.75 kW, 40 ...

working area: 3000 x 1500 mm : 5000 W : 25 mm sheet thickness for stainless steel: 20 mm Sheet thickness aluminum: 12 mm machine weight ab.: 12.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CENTAURO cast iron band saw model CL800: - with 800mm solid flywheels - Motor KW 5.5 / HP 7.5, Volt 380 - Tilting table up to 20° - upper and lower blade guide Year 1998, machine according to CE standards AVAILABILITY FROM JUNE 2026

CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz

THERMO SCIENTIFIC MICRO CL21R Refrigerated Laboratory Centrifuge with 75003424 Rotor New equipment in its original packaging Model: Micro CL 21 R (Microcl21R / microcl17) Manufacturer Part Number: 75002470 Type: Refrigerated Benchtop Centrifuge Dimensions: 30x44x33 cm Weight: 28kg Speed / force: 14,800 rpm - RCF max with rotor fixed angle (g): 21,100 Speed Range: 14800 RPM Fixed rotor reference 75003424 + 75003410 cover 4 cylindrical pods of 85 ml For 24 tubes of 1.5 / 2ml Year of Manufacture: 2022

THERMO SCIENTIFIC MICRO CL21 Laboratory Centrifuge with 75003424 Rotor New equipment in its original packaging Model No.: Micro CL 21 (Microcl21 / Microcl17) Manufacturer Part Number: 75002465 Type: Non-Refrigerated Benchtop Centrifuge Dimensions: 24x35x23 cm Speed / force: 14,800 rpm - RCF max with rotor fixed angle (g): 21,100 Speed Range: 14800 RPM Fixed rotor reference 75003424 + 75003410 cover 4 cylindrical pods of 85 ml For 24 tubes of 1.5 / 2ml Year of Manufacture: 2019

Clevertech palletiser installation consisting of: - Clevertech palletiser, model: AC422 HS1, serial number: S17010, year of construction: 2017, 400 V, 3 Ph, 50 Hz, 50 A, weight: 22000 kg, s/s product infeed rollers, roller width: 930 mm, plastic belt, belt width: 1200 mm, s/s pallet outfeed rollers, roller width: 1200 mm, - Clevertech palletiser, model: AC422 HS1, serial number: S17012, year of construction: 2017, 400 V, 3 Ph, 50 Hz, 50 A, weight: 22000 kg, s/s product infeed rollers, roller width: 930 mm, plastic belt, belt width: 1200 mm, s/s pallet outfeed rollers, roller width: 1200 mm, - Clevertech 3 lanes infeed conveyors for empty pallets, s/s rollers, roller width: (3x) 1200 mm, - Clevertech 2 lanes pallet conveyor, s/s rollers, roller width: (2x) 1200 mm, - 3 steel switch cabinets, dimensions: (2x) 6200 mm x 500 mm x 2200 mm, (1x) 4000 mm x 500 mm x 2200 mm, Total floor dimensio ...

Aircooled chiller/Heat pump CLIMAVENETA NX N Y/CA 1104T 311 kW/327 kW Cooling capacity: 311 kW / 88.43 tons (12/7 — 35°C) Heating capacity: 327 kW / 92.98 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU80385VLB4-2 (scroll) + 2 pcs. Bitzer GSU80295VLB4-2 (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Grundfos MGE112MC-2FF215-JA-400 (Frequency inverter) Dimensions: 6.12x2.23x2.15 m Weight: 3940 kg Working hours: 0/0/0/0 h. Condition: New

Aircooled chiller CLIMAVENETA NX2 G06/K 0706 656.5 kW Cooling capacity: 656.5 kW / 186.67 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 5 pcs. Danfoss DSH485C4APC (scroll) + 1 pcs. Danfoss DSH600B4APC (scroll) Type of refrigerant: R454B Number of fans: 12 pcs. (EC-fans) Dimensions: 6.26x2.26x2.57 m. Weight: 5148 kg. Working hours: 0/0/0/0/0/0 h. Condition: New