circular used for sale

Offer 26003 Technical data: - Saw blade diameter up to 370 mm - Cutting range at 90° around 110 mm - Square 100 mm - Rectangle 280 x 40 mm - or 240 x 85 mm - at 45° around 110 mm - Square 100 mm - Rectangle 220 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 380 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.

A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.

saw blade diameter: 300 mm cutting diameter: 100 mm saw blade turning speeds: 40 / 80 U/min capacity 90 degrees: square: 90 mm capacity 90 degrees: round: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chest grinding machine for HM circular saw blades. Completely overhauled and painted. Suitable for oil and emulsion cooling. Saw blade Ø 150 - 1000 mm, tooth pitch 0 - 120 mm.

230 V, 2.0 Kw, 50 Hz, 9.6 A, Extraction connection 2x 40 mm, Saw blade 250 mm, Cutting height 80 mm, Cutting width 250 mm, Cutting length, sliding table 2000 mm, Work table 730x830 mm, Boom table 370x470 mm, Boom with hold-down, extendable 2000 mm, Rip fence with angle adjustment, 45° angle adjustment right/left

Automatic machine for chest and back grinding of carbide-tipped circular saw blades; Refurbished and repainted

Saw blade Ø: 350 mm thereby cutting area Round: 120 mm Square: 100 x 100 mm Rectangle: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Approx. space requirement: 800 x 700 x 1770 mm

Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:

Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.

PART NUMBER 8006 SPECIFICATIONS - max diameter of the main disc with a scoring scoring rod 350mm - max diameter of the main blade without a scoring rod 450mm - cutting height with the blade in place: 350mm, 100mm - electric adjustment of the main disc up/down + angle - Electric angle display - electric adjustment of the undercut up/down, right/left - spindle diameter 30mm - Spindle locking - with a sliding trolley - cutting length on a trolley 3400mm - cutting width at the guide 1300mm - with sidecar - with an undercutter - max scoring diameter 120mm - spindle diameter 22mm - 0.75kW scoring motor - main motor 5.5kW - 4 types of rotational speed - electronic speed display - Diameter of the extraction port 120mm, 80mm - table top dimensions 1220x730mm - Table top dimensions with widening 1440mm - Table top dimensions with extension 2060mm - shield cover - dim ...

Suitable for automatically grinding chip breaker grooves in HSS, segmented and TCT circular saws. Accessories: Control system for automatic offset of grinding spindle,, coolant system,, stepless adjustable working rate,, machine light., 1 sawblade mount., Circular saw blade diameter: 165 - 630 mm, Tooth pitch: 3 - 50 mm, Saw blade thickness: 2 - 6 mm, Working speed: continuously adjustable from 24 - 50 z/min., Grinding wheel diameter: 25 and 30 mm, Grinding wheel width: 0.3/0.4 and 0.5 mm, Connected load approx.: 0.4 kW (400 V / 50 Hz), Weight approx.: 210 kg, Dimensions W x D x H approx.: 1020 x 900 x 1620 mm, colour: light grey RAL 7047

Table saw, precision circular saw Manufacturer: Rapid Model; PK-100 Motor: 2.2 KW

cutting capacity: 2,5 mm mm throat: 750 mm round blank diameter max.: ca. 1500 mm weight of the machine ca.: ca. 800 kg includes on set of new replacement tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KASTO U 10 / Metal circular saw with material support -CE marking -Year of construction 2012 -Cutting area / Round 90 degrees /100x100mm -Cutting area / Flat 90 degrees / 90x90mm -Cutting area / square 90 degrees / 170x90mm -Mitre cutting device -Coolant device -Vise with counter-clamping device for burr-free cutting -Infinitely adjustable saw feed -2x saw cutting speeds -Dimensions circular saw blade 350x2.5x32mm -Saw motor 1.8 KW Dimensions: LxWxH 1.2x0.8x1.9 meters / Weight 500 kg

HAULICK Roll Sheet Shears / Circular Knife Shears -Max. sheet steel: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Cutting blade diameter: approx. 120 – 150 mm - Table size: approx. 500 x 250 mm -Projection / feed range: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: Belt drive -Straight cuts -Strip cutting -Endless cutting of metal sheets -Sheet steel up to approx. 2.5 mm -Aluminium and non-ferrous metals correspondingly stronger Dimensions: LxWxH 0.6x0.9x1.1 meters / Weight 180Kg

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg

Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment.

Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical metal clamping - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg - Feeder – roller conveyor with shelf 4000 mm - Discharge – roller conveyor with dimension stop 4000 mm

A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible.

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 220 x 80 mm feed length: 600 mm feed length: multiple: 1800 mm cutting speed: 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26163 Technical data approx : - Max. workpiece diameter 80 mm - Projection 70 mm - Welding torch tripod adjustable in X, Y, Z - Tripod method by handwheel 500 mm - Projection tripod 70 mm - Center width 600 mm - Tailstock with pneumatic pressure tip - 3 jaw chuck 100 mm - Handheld remote control - Connection cable - Pneumatic connection - Table base W 2000 x H 850 x D 700 mm - Space requirement approx. W 1150 x H 650 x D 500 mm - Weight approx. 200 kg

CUTTING . TRIMMING SAW machine for solid wood MZ PROJECT LC 4000 second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. Maximum cutting length: mm.4000 motor power: Hp 15 Total weight: kg. 3.000 volts: 380/50

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm Saw blades cannot be swivelled 2 saw motors Motor power approx. 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2000 mm Weight approx. 1300 kg Shipping dimensions approx. 3900 mm x 1300 mm x H 1200 mm

Circular Metal Saw manufactured in 2008. This KASTO KASTOspeed C 9 is designed for sawing steel and non-ferrous metals, featuring a cutting range of round ø15-90 mm or 15x15-80x80. It includes a powerful 11 kW saw unit drive motor, enabling cutting speeds of 50-700 m/min. If you are looking to get high-quality sawing capabilities, consider the KASTO KASTOspeed C 9 machine we have for sale. Contact us for further details.

Key data: 45 °

TECHNICAL DATA: Table dimensions: 1100 x 1100 mm Saw blade: Ø 350 mm Saw blade inclination: 0 – 45° Installed power: 5.5 kW INCLUDED IN DELIVERY: 01 3-roller drive with speed controller

A universal external and internal cylindrical grinding machine Tachella, refurbished in 2021, is available. Center distance: 600mm, center height: 120mm, max. grinding diameter: 240mm, max. grinding length: 600mm, X/Z travel: 600mm/250mm, max. workpiece weight: 100kg/40kg. Machine dimensions X/Y/Z: approx. 2700mm/1900mm/1700mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

ADIGE TT640 circular sawing machine was built in 2009 in Italy by ADIGE S.p.A. The machine enables precise, automatic cutting of a wide range of metal workpieces, such as bars, tubes and profiles. Solid, square and rectangular sections are machined by means of a cutting disc with a maximum diameter of 275 mm. It ensures high repeatability and cutting precision in both unit and series production. The ADIGE TT640 is equipped with a feeder that facilitates the loading of material into the workspace and enables continuous machine operation. The intuitive SIEMENS SIMATIC PANEL HMI control panel enables precise programming and control of process parameters, ensuring user-friendly operation. All this is complemented by an extremely rigid design that maintains high operational stability even during the most intensive use. The ADIGE TT 640 automatic circular sawing machine weighs 1350 kg. T ...

Sliding table saw Martin T 65 Heavy precision sliding table saw 3.5" LCD color screen Motor 5.5 kW Saw blade tiltable 0 - 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Parallelogram transverse stage, for inclination on both sides up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Analogue length stop with 2-point system Trimming length 3,000 mm Cutting width with rip fence 1,100 mm Width stop adjustment via handwheel Reading width stop via control CE version Machine is WORKSHOP overhauled in TOP condition from small business ex location 

Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details.

saw blade diameter: 300 mm cutting diameter: 100 mm saw blade turning speeds: 40 / 80 U/min capacity 90 degrees: square: 90 mm capacity 90 degrees: round: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t Cold circular saw - 45-degree miter cut (one-sided) - Material stop up to 1170 mm - Coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slitting saw CENTAURO SL 3000 Cutting Length 3400mm Cutting width max 600mm Cutting height max 160mm Saw size 550mm Main motor power 11kw Feed speed up to 80m/min Machine dimensions 5285x1532x2150cmH Weight 1500kg Year of manufacture 2001 Net price

saw blade diameter: 315 mm dimensions of saw-blade: 350 x 40 x 2,5 mm cutting diameter: 90 mm capacity 90 degrees: flat: 150 x 90 mm capacity 45 degrees: round: rechts & links 90 mm capacity 45 degrees: flat: rechts & links 105 x 90 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: flat: 75 x 70 mm cutting speed: 33 / 66 m/min total power requirement: 1,8 kW weight of the machine ca.: 340 kg dimensions of the machine ca.: 900 x 800 x 1700 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Saw blade - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.Nr 00933 see video: Name of the system: circular saw Manufacturer: Eisele Model Vms – II – S Year of construction 1988 Table can be rotated up to 45 degrees Clamping 250 mm width Height min. 150mm height Two speeds Can cut with guide or without guide Condition Technically OK

saw blade diameter: 370 x 3,0 x 40 mm cutting diameter: 120 mm stroke: -- mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 180 x 100 mm capacity 45 degrees: round: li. 120 / re. 105 mm capacity 45 degrees: square: li. 100 / re. 100 mm capacity 45 degrees: flat: li. 130x100 / re . 130x10 mm capacity 60 degrees: round: 110 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90 x 100 mm total power requirement: 1,8 / 2,2 kW weight of the machine ca.: 392 kg dimensions of the machine ca.: 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular vibratory feeder manufactured by Rodant, model AV-50, second hand. The equipment is mounted on an aluminum structure. Technical characteristics Model AV-50 Year of manufacture 2007 Motor 220 V 50 Hz No documentation In your state

saw blade diameter: 300 mm cutting diameter: 100 mm capacity 45 degrees: flat: 105 x 80 mm capacity 45 degrees: round: 100 mm capacity 60 degrees: flat: 80 x 70 mm capacity 60 degrees: round: 90,0 mm dimensions of saw-blade: 300 x 2,5 x 40 mm hole of sawblade: 40,0 mm stroke: 150 mm cutting speed: 17 + 33 U/min voltage: 400 V weight: 340 kg range L-W-H: 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. cutting height: 87 mm max. cutting length approx.: 200 mm Saw blade Ø max.: 250 mm Saw blade speeds via manual gearbox approx.: 90 - 4000 rpm Drive motor: 380 V, 1.2 kW Footprint: 1050 x 750 x 1100 mm Weight approx.: 210 kg

cutting diameter: 260 mm serial number: 109967 volt: 380 V frequency: 50 Hz weight of the machine ca.: 500 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm miter: . : Kühlung weight of the machine ca.: 1 t number: 4 Stück Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 440 mm weight of the machine ca.: 780 kg miter: feed: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 225 mm cutting diameter: max. 60 mm feed: max. 600 mm total power requirement: 5 kW weight of the machine ca.: 1,03 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 380 mm pneumatic clamping: ja : 46893 weight of the machine ca.: 1,3 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm mitter cutting - all-position: +90°/-90° ° cutting speed: 10/20 m/min voltage: 400 V feed speeds infinitely variable: 0 - 1000 mm/min total power requirement: 3,4 kW weight of the machine ca.: 840 kg dimensions of the machine ca.: 1,10 x 0,9 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mm cutting diameter: 150 mm stroke: 1300 mm Control: cutting range: 140x140 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Roller conveyor 6000x350 Roller conveyor 4500x700 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

saw blade diameter: 1250 mm cutting diameter: 380 mm cutting range: 480x320 mm motor speeds:: 3000 U/min feed speeds: 1000 mm/min main drive motor: 112 kW chip conveyor: cutting speed: 10-265 m/min total power requirement: 125 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created wit ...

Sawblade tiltable: . ° cutting width: . mm Motor output: . kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter: 710 mm Number of teeth: . St. Width of teeth: 6 mm Bore: 80 mm : 120 mm Thickness: 5 mm number: 30 St. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24212 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - Left up to 45° - Right up to 30° - Saw blade speeds 34 + 68 1/min - Drive 400 V / 2 / 2.6 kW - Coolant device - Roller conveyor feeder 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Key data: 350 mm

Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Flat sawing area 45°: 120 x 100 mm Cutting range round: 120 mm Pneumatic saw blade feed Coolant pump / minimum quantity spraying device Pneumatic material clamping Countershafts for sawing stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg