circular used for sale

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.

Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted.

L x W: 4.000 x 1.600 mm. - With frame, electrical motor, cardan-shaft and springs

Size: 2.200 x 6.800 (5.750)mm - Year of Manufacture: 2002 - 2 Decks - Included: 18 kW Electrical motor, Cardan shaft and Springs.

Size: 1.800 x 4.000mm - Year of Manufacture: 1998 - With Electrical motor (11 kW/6), Cardan shaft and springs - Will be overhauled, sandblasted and painted.

OVERHAULED - Size: 1.400 x 3.000 mm - With Electrical motor, Cardan shaft and Spring elements.

OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.

Size: 1.400 x 2.400 mm - Included: Electrical Motor (4 kW / 1.060 RPM) and springs - Will be overhauled, sandblasted and painted.

OVERHAULED - Size: 1.500 x 2.000 mm - Included: Electrical motor and springs

Size: 1.600 x 5.500 mm - Decks: 2 - Included Electrical motor and springs - Will be overhauled, sandblasted and painted

Size: 1.500 x 4.500 mm - Decks: 4 - Included: Electrical motor and springs (Frame not included)

A high-performance circular shear Aryma for series production of discs and rings made of sheet metal is available. Material thickness: 3mm, max. disc diameter: 150mm, max. square sheet disc diameter: 1000mm, max. octagonal disc diameter: 1250mm, cutting speed: 70m/min, cutting roller diameter: 70mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1750mm, weight: approx. 1500kg. An inspection on site is possible.

Sawblade tiltable: - ° cutting width: - mm Motor output: - kW Cutting height: - mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6800x3350x1500 mm Weight: 700 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x2900x850 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x2800x1100 mm Weight: 330 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x2900x850 mm Weight: 1280 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1450x2700x1450 mm Weight: 350 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2540x2900x850 mm Weight: 1200 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8015x1635x2125 mm Weight: 2400 kg Total power requirement: 13,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1860x2700x1450 mm Weight: 350 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x2800x1100 mm Weight: 310 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: ° cutting width: mm Motor output: kW Cutting height: mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...

Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 245 x 40 mm 2 cutting speeds by pole-switchable motor: 9 and 18 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm

Key data: 400 mm, 2200 mm

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm 2 saw motors Motor power 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2500 mm 2 front stop rails 1 piece length 1200 mm, 1 piece length 2400 mm With extraction connection and pipe Including 10 saw blades with a diameter of 400 mm Weight approx. 1300 kg Shipping Dimensions 3900 mm x 1300 mm x H 1200 mm

GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ.  ...

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

Key data: 500 mm

Aluminium circular saw, semi-automatic aluminium underfloor circular saw for mitre cuts 0 to 67.5 degrees to the left and right - Machine with solid cast construction - Large solid rotary table - 7 main angles with fixed stops - Mitre 0 to 67.5 degrees left and right - 2 pneumatic vertical and horizontal vises - Two-hand safety control - Infinitely adjustable saw blade feed Great condition, machine hardly used. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Saw blade: 500 mm Colour: blue/yellow Total power requirement: 380 V Weight: 550 kg Dimensions: 1140 x 1150 x 1740 mm Speed min./max.: 2860 Cutting area at 90 degrees square 160 x 160 mm Cutting area at 90 degrees rectangular 260 x 100 mm Cutting area at 45 degrees square 145 x 145 mm Cutting area at 45 degrees rectangular 185 x 100 mm Angle a ...

Sliding table saw Felder K700, built in 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm format table length, approx. 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Circular saw Felder K7, very good condition, 3000 mm table length, 600 kgPrices subject to change, errors, printing and typesetting errors excepted

The new Pilous DB700Pro double edger is aimed at professional users who demand maximum efficiency and capacity. This model offers more powerful units, optimized stability, and expanded adjustment options to process even the most demanding materials with maximum accuracy. With its powerful drives, high cutting performance, and durable components, the CTR-DB700PRO is the perfect solution for businesses that value speed, precision, and cost-effectiveness. ... Advantages and Features: - Reinforced drive technology for maximum performance - Extremely stable machine base - Fast, precise adjustments for professional applications - Significantly increased wood throughput capacity - Very high cutting height of 105 mm - High level of safety thanks to 4 rows of anti-kickback technology and multiple emergency stop switches - Perfect material feed thanks to 4 driven steel feed rollers at the bottom a ...

Holzprofi Maker PS315F-2000 sliding table saw with smooth sliding carriage and large outrigger table, pivoting circular saw blade, and finely adjustable crosscut stop. Space-saving thanks to the easily removable outrigger table. Scoring tool, miter stop, and eccentric clamp included as standard. New: Preparation for grooving cutter. Technical data: Main engine power S1 3,8 kW Voltage 400 V Saw blade tilting 45° Sliding table 2000 x 267mm Cutting length 2300 mm Saw blade size 315 mm Bo. 30 mm Scoring blade 100 mm Bo. 20 mm Cutting depth 90°/45° 100 mm / 80 mm Speed saw blade 4500 RPM Speed scoring saw blade 8500 RPM Extraction connection 100 mm Groove cutter thickness (optional) 6-22.5 mm Groove cutter bore (optional) 30 mm Weight 284 kg Optional equipment: with 2600mm format table, Driving device FE-MW-1

Holzprofi panel saw KS400 incl. scoring unit, smooth running format sliding table with large outrigger table, saw blade tiltable, fine adjustable parallel rip fence incl. mitre fence and eccentric clamps. Very stable guidance of the format table for precise working even with heavy work pieces. With own motor for the scoring unit for an easy deactivation. Technical data: Main motor outputS1 5,5 kW Scoring motor output S1 0,75 kW Voltage 400 V Saw blade tilting 0-45° Format table size 3200 x 375 mm Blade dimensions 400 mm Cutting depth 130 mm Scoring saw blade 120/20 mm Speed saw blade 3000/4000/5000 RPM Speed scoring saw blade 8000 RPM Cutting width 1250 mm Weight 1000 kg

Sliding table saw Laguna Fusion, good condition, 1450 watts, 1118 mm table length, 792 mm table width, 79 mm cutting height, 3800 rpm, 110 kgPrices subject to change, errors, printing and typesetting errors excepted

The CTR-DB400 sets new standards in precision, efficiency, and ease of use. This compact double edger was specifically developed for businesses that demand the highest cutting quality while minimizing operating costs. With its powerful drive, robust construction, and precise adjustment of the saw units, the CTR-DB400 delivers consistently clean, parallel cuts – ideal for the cost-effective processing of planks, squared timber, and boards. Thanks to its intuitive operation and low-maintenance components, the CTR-DB400 is the perfect solution for small and medium-sized production lines looking to reliably increase their output. Designed, built, and quality-tested in Europe! Made in EU Advantages and Features: - Fixed saw blade, adjustable in 50mm increments for maximum space utilization - Dust extraction directly at the saw blade for optimal dust removal - Carpet with 2 pressure rollers  ...

Circular saw Elektra Beckum PKU250, good condition, year 2004, standard equipment, 2.7 kW S6, 83 mm cutting height, 1800 mm format table length, 800 mm table length, 800 mm table width, approx. 75 kgPrices subject to change, errors, printing and typesetting errors excepted

saw blade diameter: 450 mm capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 210 x 170 mm capacity 45 degrees: square: 145 x 170 mm turning speeds: 2900 U/min total power requirement: 2,3 kW weight of the machine ca.: 600 Kg dimensions: 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information.

This sawing machine was manufactured in 2010. The KASTO Radial M10 can handle a variety of materials with cutting capacities up to 100 mm for round solid materials and tubes, and 170 x 90 mm for flat materials. It operates on a 400 V 50 Hz 3-phase connection and measures 600 x 800 x 1700 mm, weighing 452 kg. For more information about this sawing machine, please reach out to us.