137,099 used machines on RESALE, but how to find them? Machine Search
saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sawblade tiltable: 45 ° Length of the rolling table: 2500 mm cutting width: 1250 mm Motor output: 4,0 kW Cutting height: 90 mm Cutting height at 45°: mm Saw blade diameter: mm Speed: 4000 / 6000 U/min. weight of the machine ca.: 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg
CONTROLS Point-to-point control (NC) SIEMENS S7 TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60% -Saw blade feed rate: 220 mm/s -3 × 2 m infeed roller conveyor, total length 6.2 m -Light barrier for m ...
Eisele VMS 120 / Cold Circular Saw -Saw blade diameter: 275 mm -Saw blade speed: 40 / 80 rpm (2 stages, pole switchable) -Cutting speed: approx. 80 m/min -Drive motor: 380 V (three-phase current) - Power: 1.0 / 1.2 kW -Cutting range at 90° (round material): max. Ø 90 mm -Cutting range at 90° (square/rectangle): max. 75 × 75 mm -Cutting range at 45° mitre (rectangle): max. 75 × 75 mm -Coolant device -5x circular saw blades -Material stand Dimensions: LxWxH 0.7x0.6x1.5 meters / Weight 180Kg
ID3875 Kretzer Rotomat 5L Drum saw, with 5 large compartments, log length 25–50 cm, rarely used Drum saw, with 5 large compartments, log length 25-50 cm, little used
Stock number: D1243, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: On 5 pcs. legs with wheels, Total height: H 900 mm, Table plate diameter: Ø 1800 mm, Motor: 0,18 kW - 220/380 Volt - 65,5 rpm.
Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Mitre adjustable left + right up to 30° - Cutting range at 90° round + square 140 mm - Rectangle 210 x 120 mm - at 45° round + square 120 mm - at 30° round + square 105 mm - Cutting speeds infinitely adjustable 10 to 80 m/min - Feed speed of the saw blade hydr. infinitely variable - Pneumatic vise / vice - Coolant device + micro spray system - Discharge roller conveyor with dimension stop 3000 mm - Roller conveyor feed 3000 mm - Pneumatic connection 6 bar - Drive 400 V / 4.0 kW - Space requirement approx. W 1000 x H 1900 x D 1200 mm - Weight approx. 1000 kg
Key data: 45 °, 3200 mm, 1300 mm
Gebr. Sliding table saw ALTENDORF WA80 Year 2005 Motor power: 5.5 kW Scoring unit: 0.75 kW 45° swivel Height and swivel adjustment: electric Digital display for swivel Sliding carriage length: 3.20 m Cutting width rip fence: 1.30 m Max. saw blade diameter: 400 mm max. cutting height: 130 mm 4 speeds: 3.0 / 4.0 / 5,000 rpm Suction nozzle: 120 + 80 mm Weight: approx. 850 kg The saw comes from a 1-man operation. Manufacturer information
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-76
Speed infinitely adjustable, clamp rotatable Auction-ID: A1-50476-14
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-77
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-73
Model: BCS-200 • Power: 1700 W • Condition: New, old stock • Additional Notes: Portable dry-cut circular saw for metal, ideal for cutting steel, stainless steel and other metals, also usable on wood. Blade diameter 200mm. Cutting capacity: 67mm at 0°, 42mm at 45°. Weight 6.3kg. Auction-ID: A7-50988-94
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-79
Clamp rotatable, clamp mechanical with pneumatic clamping, roller track 1150mm long Auction-ID: A1-50476-134
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-34
Vertongen AZ05 panel saw / sliding table saw – 380 V – 7.5 hp – carriage 2,600 mm Heavy professional panel saw / format saw from the Belgian brand Vertongen, type AZ05. The machine is equipped with a powerful 7.5 hp (approx. 5.5 kW) electric motor and a long sliding carriage/carriage of approx. 2,600 mm, suitable for precise cutting of aluminum sheet material and solid wood. Technical data: • Brand: Vertongen • Type: AZ05 • Machine: panel saw / sliding table saw • Power supply: 380 V • Engine power: 7.5 hp / approx. 5.5 kW • Sliding carriage/carriage: approx. 2,600 mm • Heavy-duty professional design • Sturdy construction • Suitable for sheet material and solid wood and aluminum Auction-ID: A3-46142-11984
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-80
Type: table saw / old sliding table saw Use: wood cutting and cutting Construction: heavy cast iron/metal casting Table: metal Circular blade: present Parallel Guide: Present Drive: Separate electric motor with belts Adjustment: Mechanical flywheel visible, probably for blade height Blade protection: orange cover present but disassembled on the photo Condition: old workshop equipment, significant traces of use and oxidation Auction-ID: A3-46142-35910
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-74
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-75
Equipped with: axle 30mm, 2 saw blades for the scorer, a saw blade, scorer (120mm, shaft size 22mm), safety cap, 380v connection, is already on pallet and is disassembled, manual, adjustable for beam wood Auction-ID: A1-47368-1601
Circular saw for cutting aluminum and other non-ferrous materials, manually operated. Cast-iron frame. Blade diameter 350mm. Electric motor 2.2kW, 220V. 1 manual vice, replaceable with pneumatic; can be fitted with a second or third vice. Cutting angle 0-45° with blade tilting left. Cutting capacity approx. 160mm at the base, 100mm in height. Reconditioned by our specialized technical department, delivered with 1-year warranty of good operation. Auction-ID: A7-50988-5
Equipped with spray device, pneumatic clamping, reversing brake Auction-ID: A1-47368-1454
The machine can no longer be tilted Auction-ID: A1-47368-1450
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-78
10 machines in stock EISELE high-performance circular sawing machine VMS 350 das ORIGINAL - made in Weilheim/Germany Equipped to accommodate saw blades up to 350 mm in diameter. Min. / max. cutting range at: 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Rectangle (in mm) 8 x 8 / 170 x 100 8 X 8 / 120 x 100 Smaller cross-sections on request. With pole-switchable three-phase motor, 1.4/1.9 kW, including clamping device to the left and right of the saw blade, stationary base frame with built-in coolant device and chip drawer, material support height 900 mm. Sawing machine is designed for voltage mains 400 V / 50 Hz. (3LNPE400V/50Hz). Spare parts supply for 10 years. Standard version with 17/34 min-1 or 34/68 min-1 Standard version, models differ in the type of cooling
Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-84
saw blade diameter: 315 x 2,5 x 32 mm cutting diameter: 100 mm cutting speed: 33/66 m/min height of material-table: 900 mm total power requirement: 1,8 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,05 x 0,50 x 1,80 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Resawing saw Esterer Type: DKV/E – 1A Cutting width 750 mm Cutting height 160 mm Motor 30 kW / 380 V / 56 A 2960 rpm hydraulic width adjustment with rod with roller conveyor behind it 9 m long x 800 mm wide Roller conveyor with ribbed discharge roller
Kuhn GF 10601 TO GII Drive trailed circular tedder / hay tedder Specifications: Brand: Kuhn Model/ Type: GF 10601 TO Version: GII Drive Product Type: Trailed Circle Shaker/Hay Shaker Year of construction: 2008 Serial Number: B1663 Identification number: 1125500 B1663 Own weight: 2,000 kg Drive: PTO Number of rotors: 10 Features: Trailed version 10 rotors Multiple tine arms per rotor Double spring tines GII Drive rotor drive PTO drive Wide Angle PTO Hydraulically foldable Hydraulic connections Compact transport position Transport chassis 2 transport wheels Support wheels at the rotors Drawbar Support leg Lighting Turn signals Red/white warning signs Mudguards License plate holder Various safety and warning features Particularities: Trailed tedder for wide and even spreading and turning of cut grass/hay. The hydraulically folding rotor sections ...
LINCK V30 chipper-canter line with integrated VS pre-cut saw for continuous operation, year 2000. Suitable for processing side boards and changing log dimensions. Circular-operation clamping technology, PLC control, frequency-controlled feed and synchronised clamping/sawing units. Example data: feed speed up to 150 m/min, log lengths 3.0–5.2 m, top diameter approx. 8–62 cm, resaw cutting height up to 350 mm. Modular system prepared for additional milling and sawing units. Overhauled and serviced in 2025.
Three VOLLMER circular saw blade sharpening machines available. 1) CANA/E, year 1988, serial 9179: semi-automatic sharpening of carbide or HSS circular saw blades, automatic mechanical tooth feed, adjustable pitch and swivelling grinding head; AEG 0.75 kW motor, 2,800 rpm, 220/380 V. 2) VOLLMER CNHV: mechanical semi-automatic machine for carbide-tipped blades, AEG 0.55 kW motor, 2,750 rpm, suitable for approx. 80–600 mm blade diameter. 3) VOLLMER 55/2 H2: robust mechanical machine for HSS and carbide blades, 0.4 kW, 2,830 rpm, blade range approx. 80–500 mm. Solid cast-iron construction. Last service 2024.
TECHNICAL DATA: Saw stroke: 550 mm Saw blade: max. Ø 300 mm Tilt of the saw blade: 0° - 90° Installed power: 2.5 hp
equipped with a base; without saw blade; Auction-ID: A1-50707-104
On mobile cart with 3 layers with various lengths of threaded end Auction-ID: A1-50663-1641
miter adjustable; Auction-ID: A1-50707-253
Saw blade diameter 315 mm Cutting diameter 80 mm Speed 1450 rpm Table 450 x 400 mm Mitre 45°/45° Connection voltage 400 volts Total power requirement 1.2 kW Machine weight approx. 0.2 t Space requirement approx. 0.9 x 0.9 x 1.4 m Auction-ID: A7-51438-450
ALFAMACCHINE M400 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 400mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-100mm Cutting height: 10-80mm Coolant feeding system when cutting aluminum Machine dimensions: length 3160mm, width 700mm, height 1570mm Machine Weight 400kg
Manual cold circular saw with: - Machine base - Support rail 1500mm Saw blade diameter 275 mm Cutting range at 90 degrees: around 80 mm Cutting range at 90 degrees: square 70 mm Cutting range at 90 degrees: flat 100 x 60 mm Cutting range at 45 degrees: around 70 mm Cutting range at 45 degrees: square 60 mm Cutting range at 60 degrees: flat 80 x 50 mm Clamping range 110 mm Speed 45 / 90 rpm Total power requirement 0.5 kW Machine weight approx. 0.07 t Dimensions approx. 900 x 700 x 1600 m Condition: functional Auction-ID: A7-51438-483
Cold circular saw with: Saw blade diameter max. 350 mm Cutting range: round 110 mm Cutting range: square 100 mm 2 saw blade speeds Machine weight approx. 0.65 t Dimensions approx. 0.8 x 1.0 x 1.85 m Condition: untested (6) Auction-ID: A7-51438-531
Vertongen woodworking machine, type AZ05, equipped with a table saw. Robust construction machine including a large work table, circular saw blade, rip fence and angle adjuster. Brand: Vertongen Type: AZ05 Issue No.: 3705/86 Power supply: 220 V Machine with signs of use, dust and wear marks related to its age and previous use. Sold with the elements and accessories visible in the photos. Auction-ID: A3-46110-41164
Year of Make: 2016 Serial Number: 612003946 Auction-ID: A1-51276-726
maximum number of results exceeded
please refine your search
1 € 
