circular used for sale

Dimter Opticut 302 Optimizer Cutting out errors and fixed lengths The machine after a comprehensive overhaul in 2019 Year of Build 2000

saw blade diameter: 300 mm capacity 90 degrees: round: 102 mm capacity 90 degrees: square: 90 mm capacity 90 degrees: flat: 120x80 mm capacity 45 degrees: round: 90/80 mm capacity 45 degrees: square: 80/70 mm capacity 60 degrees: flat: 90x70/85x70 mm total power requirement: 1,5/2,0 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,5 x 1,05 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 400 mm Sawing capacity: 130 mm round / 120 x 120 mm square Saw adjustment: 45º left/right Saw steps: 13/17/25 mtr. per min. Main engine power: 2.7 kW Country of origin: Germany Machine weight: 900 kg Machine LxWxH: 1080 x 900 x 1760 mm

Martin T60Classic sliding table saw Brand Martin Type T60C M-No.: V465053 Control panel Touch screen integrated at eye level in the suction support 2-axis control (saw height, inclination, manual cutting width via handwheels, but with digital readout on touch screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivelling: 0° - 45° Speed control: 4.000/4.800/6.000/ tpm Motor: 5.5 KW Trolley: 3,000 mm Cutting width: 1,250 mm mm Laying table: Galvanized steel with fixed-angle stops 0º, 22.5º, 30ºen 45º. Dimensions: 1,340 650 mm Long stop: 2,200 - 3,300 mm with 2 folding attachments and fine adjustment Suction: Top: ø100 mm, Bottom: ø120 mm weight: 1.400 KG Condition: fully functional tested

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,6 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Martin T60Classic sliding table saw Brand Martin Type T60C M-No.: V465053 Control panel Touch screen integrated at eye level in the suction support 2-axis control (saw height, inclination, manual cutting width via handwheels, but with digital readout on touch screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivelling: 0° - 45° Speed control: 4.000/4.800/6.000/ tpm Motor: 5.5 KW Trolley: 3,000 mm Cutting width: 1,250 mm mm Laying table: Galvanized steel with fixed-angle stops 0º, 22.5º, 30ºen 45º. Dimensions: 1,340 650 mm Long stop: 2,200 - 3,300 mm with 2 folding attachments and fine adjustment Suction: Top: ø100 mm, Bottom: ø120 mm weight: 1.400 KG Condition: fully functional tested

General: Power 1.5 kW 16 A Other equipment and accessories included: Coolant device 2 saw blades

Altendorf F45 ELMO III sliding table saw Brand: Altendorf Type: F45 ELMO III Machine no.: 96-8-136 Specifications: Control panel control: LCD screen, eye level, swivel away Cutting width, cutting height, saw blade inclination Trolley: 4,300 mm (double trolley with hard room guides) Cutting width: 1300mm, NC electromotive adjustment of the parallel fence Main saw: ø200 - 500 mm, 5.5 KW, speed 3.000-6.000 0-46° and 0-200 mm electrical adjustment Scorer: None Laying table: extendable 700 mm Length stop: angle stop with fixed 90° position, 2 stop flaps, lengths up to 3500mm Condition: Maintained machine technically and functionally tested Availability: immediately Optional: DGA - Double Miter Stop Analog

Key data: 520

Sensational DIMTER optimizer OPTICUT 200 ELIT Machine from the production line, Complete machine, to it we will give a set of inlet tables, as well as a complete outlet. Measuring station, everything included Machine not running. Connect electronically and pneumatically, run the program At the customer's request, we can arrange it for a fee. Machine after mechanical overhaul in our plant If you have any questions, feel free

Table length: 3,800 mm Cutting width: 1,270 mm Scoring aggregate (saw blade Ø 120 mm) Saw blade-Ø max 400 mm Cutting height max. 130 mm Moro power 5.5 kW Speed 3,000 / 4,000 / 5,0000 rpm electr. adjustment of saw blade height, Saw blade swivel and cutting width Control in the machine body Length stop with digital displays Weight approx. 970 kg Technical data subject to actual equipment

T60C sliding table saw in CE equipment • Control 3.5" in control panel at eye level included • Handwheel for adjusting the parallel stop from operating position, digital display included • Cutting width 1,350 mm included Trimming table length 3.3 m Cutting width 1,350 mm "2-axis scoring unit, electric Scratch position left/right and scratch height can be positioned via control while the scoring saw is running, electronic display of the adjustment paths; automatic adjustment of the scoring system to each main saw blade; Blade change with ProLock; pneumatically liftable / lowered, separately from the main saw blade can be switched on / off; 0. ...

Cutting range: Round material up to 100 mm diameter Square material up to 100 x 100 mm Flat material up to 150 x 80 mm saw blade diameter: 315 mm Miter function

SPECIFICATIONS: Sliding table saw with 45° swiveling saw blade Diameter saw blade mm: 400 Diameter of the scorer mm: 120 Length of carriage mm: 3800 cutting width mm: 1600 Motor power KW: 5,5 Motor with brake Complete with: - 01 pneumatic presser - Digital control panel - Duplex continuous inclined cutter 0°-90°

Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade

Brand Martin Type T75PreX Year of construction: 2021 New exhibition MA7502050 sliding table saw T75 PreX with large screen 10.4" touchscreen T75P05-b "Option package 2, consisting of: Infinitely variable speed control 9.5 kW T7503-a Electromotive positioning of the parallel fence T7511-a Scoring system ""PreX"" 3-axis - scoring unit T7523-a" T7503-a engine power 9.5 kW (13 hp) S6-60%, with infinitely variable speed control for the main saw blade, adjustable from 2,000 - 6,000 rpm; modern, maintenance-free passive cooling of the inverter T7508/4-a: trolley: 3,300 mm T7509/3-a cutting width: 1350 mm T7511-a "Electromotive positioning of the parallel fence Measurement specification and digital dimension display in the control system; Ruler can be folded, position queried via sensor; complete in ...

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 2,500 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 1,900 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Manufacturer: H&M HM-ZN 8000-R automatic miter and beam saw Type: ZN-8000 R Motor: 6 kW Saw blade: ø600 - ø700 mm Axle: ø30 Saw height: 250mm Angle adjustment: 0 dead 180° Tilt: 0 tot 45° Zenter line: 200mm Printer: 2 boven- en 2 zijdrukkers Feed table: 9500mm Export table: 6000mm Table castors: Incoming and outgoing conveyors are driven Feed: 55 m/min. Length stop rack with 0.4 m/s feed Repeatability: 0.1 - 1 mm (naar wens instelbaar)\ Noise: 81 dB Suction: ø200 mm weight 1350KG Powers: 380V, 3 Ph, 35A + 220 V, 16A

Omga T 2020 NC Optimizer Maximum element thickness 120mm Maximum element width 320mm Minimum element length 600mm Maximum feed speed 180m/min Saw motor power 5.5kw Feed motor power 7.5kw Maximum acceleration 15m/s Saw cutting cycle time 0.2-1sec Average number of cuts 80-90/min

Kaltenbach KKS 400 Dia saw / abrasive - disk : 400 mm Sawclampspeeds: 30--260 m/min Length : 1040 mm Depth : 965 mm Height: 1650 mm Weight: 850 kg

cutting depth at 90°: 85 mm cutting depth at 45°: 54 mm max crosscut with slide table: 815 mm table: 760 x 760 mm manual backgauge 2 pneumatic cylinders for clamping workpiece Dia saw / abrasive - disk : 250 mm Turningspeeds: 5130 rpm Power needed / motorpower: 3 HP

Saw blade Ø: 370 mm Cutting range at 90° round: 120 mm Rectangle: 100 x 180 mm Mitre cutting range at 45° round: 105 mm Rectangle: 100 x 130 mm 2 saw blade speeds by pole-changing motor: 15 and 30 rpm Drive motor: 400 V, 1.5/2.2 kW Weight: 370 kg

Sliding table saw Fabr. Samco Model. Formula S2 Year: 1999 with Voritze with table spread with table publisher Motor 5.5 Kw Carriage 3200 mm with motor brake

SAC CS40 sliding table saw Year of construction: 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420 mm, Locking mechanism for easy plate loading in any position Steel sliding system Main saw mandrel (30 mm) 45° swivel Electric raising and lowering of the main sheet. Main motor 5.5 kW, self-braking motor Cutting speeds 2,600 - 4,000 and 5,600 rpm Saw blade diameter max. 400 mm Maximum cutting height 130 mm ( 90° ) 100 mm ( 45° ) Rip fence 1,500 mm Scoring saw motor 0.75 kW 120 mm (diameter scoring saw blade - 8,000 rpm scoring unit with external adjustment) Square length stop with stops, Extension table with mitre stop and sliding boom support. 400 V, 50 Hz Weight 820 kg CE, marked

Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750

Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900

Country of origin: Italy Saw blade Ø mm: 425 Weight approx. kg: 900

Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

Speed range with saw blade, diameter 400 mm 10 – 44 rpm Max. cutting diameter for round material 125 mm Machine weight approx. 1 t

Cutting length: 5320mm; Cutting height: 160mm; Feed rate: 0 - 80m/min; Width stop adjustment: electric; Display Cutting width: digital; Motor power: 11kW; Machine length: 7135mm;

1 Gebr. Multiple cross-cut saws with 2 sawing units for trimmed goods max. board length: 6.80 m min. cutting length: 1.68 m max. cutting length: : 5.68 m Saw blade diameter: 500 mm max. cutting height: approx. 140 mm Dimensions: 7.20 x 2.20 x 1.50 m Weight: approx. 700 kg Electrical length adjustment via display Sawing units are driven by chain We would be happy to send you a video

Double cross-cut saws Hüllhorst With a third saw blade Type DH52 Year of construction: 1992 Maximum cutting width 3200 mm min. cutting width 220 mm Cutting length (length of the support rails) 2500 mm Saw blades cannot be swiveled With scoring Electric width adjustment Width display with magnifying glass Third saw blade and scorer in the table on the left side of the machine Without a splitting wedge and without a scoring saw blade, saw blades with a maximum diameter of 450 mm fit on the machine, the cutting height is then a maximum of 125 mm. For a saw blade with a diameter of 350 mm, the maximum cutting height is 75 mm Main saws motor power approx. 3.2 kW each Vorritzer motor power approx. 1.5 kW each Loading dimensions approx. L 5300 mm x W 2400 mm x H 1000 mm Weight approx. 2800 kg

Weibert FO-3 Sliding table saw Format sliding table: 1600mm Motor power: 400V 3 KW 400V Cutting height: 103mm Saw blade: swivelling, D= 315mm with cut-to-length stop cpl. WJ-110100 Special price: net 3353,-€ with VAT 3990,-€

Weibert FO-3 Sliding table saw Format sliding table: 2000mm Motor power: 400V 3 KW 400V Cutting height: 103mm Saw blade: swivelling, D= 315mm with boom cpl. WJ-100100

Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - wi ...

ORDER NO. 6905 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 315mm - max cutting height 80mm - main dial adjustable up / down + angle - spindle diameter 30mm - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1050mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring disc electrically adjustable up / down - scoring motor 0,75kW - main engine 4kW - diameter of extraction connection 120mm, 50mm - table top dimensions 1230x730mm - table top dimension with extension and extension 1780x1230mm - shield cover - dimensions length / width / height 3030x3120x1170mm - weight 946kg – German production – with undercutter – unpainted – used saw, very good condition Net price: 23900 PLN Net price: 5371 EUR depending on the p ...

CATALOGUE NO. 7015 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 350mm - max cutting height 100mm - main dial adjustable up / down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring motor 0,75kW - main motor 5,5kW - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of extraction connection 120mm, 60mm - table top dimensions 1220x730mm - table top dimension with widening 1220x1150mm - shield cover - dimensions length / width / height 2880x2800x1100mm, - weight 961kg – German production – unpainted – used saw, very good condition Net price: 16900 PLN Net price: 3798 EUR depending on the price 4.45 EU ...

SPECIFICATIONS: Sliding carriage: 360 x 3200 mm Saw blade: Ø 350 mm Scoring: Ø 100 mm Installed power: 5.5 Kw Cutting width of the parallel guide: 1300 mm

Round tour with a trolley DRECKSHAGE TAG-16-S 1 Trolley: 84 x 53 mm Round guide: Ø 16 x 250 mm used, tested ! Dimensions: 250 x 465 x 42 mm

: neu : 2023 : 6246 : September 2023, Zwischenv : Italien : 3449 € : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 1,5/2 kW : 500 mm : 1050 mm : 990 mm : 135 kg vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- technically efficient, ready to work – after full service - disc diameter: 350 mm

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drill ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades

Max. saw blade diameter: 425 mm Infinitely adjustable saw blade feed 2 motor speeds Hydraulic material clamps horizontal and vertical with clamping pressure reduction Optional minimum quantity spraying or coolant pump

Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg