circular saw used for sale

Buyer is responsible for the disassembly

Saw blade adjustable 90° - 45°

incl. table extension

Equipped with HBM 300 Profi mobile moth extraction with hose. Assembled wooden work table. Diamond saw scoring device, various loose saw blades, both new and used.

Equipped with emergency stop, with accessories angle/protractor adjustment

Saw blade diameter: 350mm, weight: 68kg.

SPECIFICATIONS: Table dimensions/height mm: 1140 x 670 x 900 Sliding carriage length mm: 3800 Cutting height with saw blade diameter Ø 400 mm a 90°-45°: mm 135-95 Saw blade inclination: 90° + 45° Post-forming Vorritzer Ø max saw blade chair: mm 125 Ø Suction connection: Ø 120 mm Ø max saw blade mm: 400 Engine power KW: 8

UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg

Length: 900mm, width: 650mm, height: 1600mm, weight: 345kg.

Nominal current: 7.6A, voltage: 380V.

Compressed air supply: 6bar, motor power: 1.9kW, weight: 370kg.

Rotational speed: 7-70/min, voltage: 400V.

Length: 900mm, width: 800mm, height: 920mm, weight: 330kg.

Rotational speed: 1800/3600/min, an inspection is possible.

Saw blade diameter: 400mm, length: 1080mm, width: 900mm, height: 1760mm, weight: 925kg.

Saw blade diameter: max. 250mm, motor speed: 2800rpm, saw shaft speed: 3800rpm, saw blade bore: 20mm. Max. Cutting height 90°/45°: 82/55mm, table size: 710 x 900mm, angle adjustment: 0° to 45°.

Saw blade diameter: approx. 300mm, control: APS Elektronic. Dimensions X/Y/Z: 800mm/1200mm/1600mm. Including 2 roller conveyors (sheet steel), dimensions X/Z: 4000mm/1000mm. Defective but not irreparable. On-site inspection is possible.

Working height: approx. 925mm, cutting range: At 90°: Square: 90mm/90mm, Flat: 200mm/90mm, At 45°: Flat: 140mm/90mm. Saw blade diameter: 250mm/275mm/300mm/315mm/325mm/350mm.

Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg

Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake

saw blade diameter: 315 mm capacity 90 degrees: round: 108 mm capacity 90 degrees: square: 93 mm : 150 x 90 mm Working height: 920 mm saw blade turning speeds: 17+33 oder 33+66 U/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,328 t dimensions of the machine ca.: 0,8x0,9x1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 500 mm profile height: 250 mm profile width: 400 mm jack height: 215 mm jack depth: 185 mm Material stop swivel between 22.5° and 157.5° Jack height can be adjusted by motor with digital display Motor adjustment of the angles with digital display Depth stop motor adjustable with digital display Automatic sawing sequence via control with preselection of the cutting angles Pneumatic material clamps Coolant lubrication

Fast and efficient machine. The machine is a perfect solution especially for hardwood processors up to a maximum height of about 35 mm, who want to achieve maximum material yield and high work efficiency. Technical parameters: Power of the main motor: 2 x 3 kW or 2 x 4 kW Shaft extension possible: 120 mm Feed belt width: 400 mm Power of the feed motor: 0.55 kW Tool diameter: 300 mm Maximum material height : 35 mm ( change on request ) Minimum material length: on request Small compact cutting sawing machine. The machine is suitable for cutting material with low energy consumption. Individual parameters can be changed on request. KuSING has been manufacturing woodworking machines since 1991.

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

Machine for the processing of large-area composite panel materials With this machine you are able to process portrait panel semi-finished products that are otherwise difficult to process We offer you a technology that has already proven itself in practice and works. With this technique you can process semi-finished products up to a maximum height of 220 mm precisely and accurately The technical parameters are queried and measured as required.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

SPECIFICATIONS: Length of the sled mm: 3000 Saw blade diameter mm: 350 Diameter chair mm: 120 Inclinable

Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

- pneumatic swivelling of the saw head - pneumatic workpiece clamping - incl. operating instructions in German - Year of construction 1996 Specifications - Saw blade Ø: 450 mm - Miter range: +/- 45 ° - Connection voltage: 400 V - Dimensions WxHxD: approx. 1050 x 1600 x 1300 mm - Weight: approx. 500 kg

very stable automatic with protective lock and max. 275 saw blade

saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

Specifications Year of construction: 1995 Saw blade Ø (mm): 400 Directly from the customer used from November from CH-Pratteln available.

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Eisele PSU Hydraulics 470 Masch Nr 1141 Built 1986 RPM 6-48

Weibert SMA-700T Rocker saw PTO drive Tractors power min. 15hp PTO speed: max. 540 rpm Drive saw blade: belt drive Saw blade speed: max. 1440 rpm Saw blade diameter: 700mm Carbide-tipped Holder 30mm, tooth pitch 32mm, thickness 3.2mm Total weight 136kg Dimensions: 109mm x 85mm x 110mm (LxWxH) G&JAN-1055004

Minimax SC4E Sliding table saw Motor 5kw 400V 50hz Suction nozzle diameter 120mm Suction nozzle. Saw blade protection 60mm Cutting width with parallel fence 900mm length width left 3200mm Trimming length: 2310mm Saw blade inclination 90-45° cutting height 90°: 100mm cutting height 45°: 63mm Saw blade diameter: 4000 1/min Weight approx. 454kg G&STÜ-5504524 Optional: Scorer and top protection hood

– year of production 1998 –optimization – cutting to the line – width measurement – possibility of cutting aluminum TECHNICAL PARAMETERS: .max. cutting length 4000 mm Min. element 200 mm .max. cutting height 100 mm .max. cutting width 260 mm disc diameter 500 mm engine power 9 kW feed speed max. 160 m/min acceleration 2 m/s2 optimization in relation to length and value pneumatic material pressure three ejectors drop tables rotary table total length 2000 cm transport dimensions (L/W/H) 1300 / 245 / 220 cm weight 3500 kg

– Italian production – year of manufacture 2009 – full optimization –DTR –CE TECHNICAL PARAMETERS: cutting width max. 260 mm cutting height max. 120 mm engine power 7,5 kW material length max. 4000 mm receiving table 3000 mm disc diameter 500 mm feed speed 60 m/min possibility to program 100 dimensions of cuts programming of 5 classes of wood automatic and semi-automatic operating mode total dimension (L/W/H) 930 / 150 / 170 cm

– after technical inspection – German production – year of manufacture 2005 TECHNICAL PARAMETERS: .max. length of cut material 4500 mm .max. width 360 mm .max. height 160 mm automatic length measurement optimization in 4 quality classes total power 13 kW disc motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500 mm OptiCom Assist control receiving conveyor 5600 mm two ejectors overall length 13 m printer for marking elements cutting accuracy +/- 0.5 mm transport dimensions (L/W/H) 600 / 240 / 190 cm weight ~ 1800 kg

– after technical inspection – year of manufacture 2004 – declaration of conformity, DTR – German production TECHNICAL PARAMETERS: min./max. element input length 800 / 3500 mm .max. input width of the element 200 mm min./max. element input thickness 12 / 80 mm type of hard/soft wood cutting to the line wood classification .max. feed speed 120 m/min acceleration 5 m/s saw diameter fi 500 mm saw bore diameter 30 mm number of spindle revolutions of the saw 4600 U/min duration of 1 cycle 0.7 - 1.2 sec driven transporter at the entrance and marking station with side tables for two marking belt conveyor total power 15 kW length measurement – fluorescent camera for 3 quality receiving station – conveyor belt total length 8300 mm connection diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

: gebraucht : 1999 : 6173 : Deutschland : 11900 € : 1 : 500 mm : 2800 U/Min : Rund 180 mm, Quadratprofi : Rund 120 mm, Quadratprofi : 1100 mm : 1450 mm : 1350 mm : 490 kg hydropneumatic saw feed new HM saw blade pneumatic material clamping device vertical automatically opening protective cover discharge roller conveyor 450 mm with stop and measuring system roller 4.780x850x1.000 mm display E110, 1/10 mm pneumatic clamping handwheel locking in the operating area stop can be folded up user manual in GERMAN COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

– German production, instruction manual – year of manufacture 2008 – automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 800 mm cutting height max. 130 mm feed smoothly adjustable up to 80 m/min main engine power 11 kW disc diameter max. /Min. 600 mm / 400 mm possibility to program 100 dimensions line laser two-stage blade feed touch panel control connection diameter 2 x 160 mm machine dimensions (L/W/H) 620 / 160 / 220 cm weight 2250 kg

– Polish production – DTR, CE – year of manufacture 2011 TECHNICAL PARAMETERS: minimum length of material after formatting 800 mm maximum length of material after formatting 1600 mm maximum material width 480 mm maximum material thickness 145 mm disc diameter 500 mm smoothly adjustable feed 0-20 m/min main motor power 2 x 5,2 kW feed motor power 1.5 kW machine dimensions (L/W/H) 340 / 230 / 180 cm weight 2500 kg

Operating voltage: 400 volts, power: 4 kW, speed: maximum 6,000 rpm, saw blade diameter maximum: 400 mm, work table with 2 T-slots width: 2500 mm, adjustable with depth stop: 0 - 800 mm, with suction device Errors excepted!