circular saw used for sale

Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A / 16A CEE plug Max. cutting side passage: 260 mm Max. cutting height clearance: 310 mm Table dimensions: L59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base frame Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) including 3 saw blades Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Key data: 255 mm

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table "plateau" that rotates with the mitre of the saw blade, guaranteeing excellent support for the material t ...

Sawblade tiltable: 45 ° Length of the rolling table: 3000 mm cutting width: 1000 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

PART NUMBER: 7481 Specifications: - Track width 350mm - shaft width 350mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2050x1230mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track -laser - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm - main motor 45kW - total dimensions length/width/height 2600x2350x1850mm - weight about 4000kg Advantages: – Czech production - with laser – used multi-rip saw – very good condition Net price: 36900 PLN Net price: 8386 EUR depending on the price of 4.40 EUR (Prices may change with higher flu ...

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

PART NUMBER: 7480 Specifications: - Track width 360mm - shaft width 350mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2040x1220mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm, 160mm - main motor 30kW - total dimensions length/width/height 2600x2300x1850mm - weight about 4000kg ADVANTAGES – Czech production – used multi-rip saw – very good condition Net price: 37900 PLN Net price: 8614 EUR depending on the price of 4.40 EUR (Prices may change with higher fluctuations)

Full gate Esterer SS45 was generalueberholt Pass 450 mm 340 upm 500 Hub with complete hanging, saegen blaetters and Templates with hydraulic roller lifting with wedge wedge with drive power 30 kW with hydraulic unit with complete control cabinet

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

EiMa double cross-cut saw DKS 123 and accessories, built in 2010, very good condition (has been regularly serviced). New price at that time - approx. € 55,000.00 saw, € 15,000.00 accessories Specifications: Manufacturer: EiMa Maschinenbau GmbH, Frickenhausen Type: GKS 123 Type of current: 230/ 400V / 50 Hz Operating voltage: 400 V Control voltage: DC 24V Machine power: 23 kW Rated current: 44 A Dimensions approx. Length: 6.40 meters Width: 5.37 meters Height: 1.10 meters Weight: 2.2 tons The accessories consist of the photos, various replacement profile cutter heads (partly from Leitz-Variform and as good as new in original packaging) etc. The double deflection saw is currently still at our customer in Gerolstein and was taken out of service on 23.10.2024 - due to a restructuring. Only the offered machine and accessories are expressly sold, any things th ...

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of manufacture: 2018 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493

Band saw Saw machine Brand: HESKA Type: ESU-H63 S/N 793322 Infinitely adjustable 16-3200 m/min Hydraulic feed table with approx. 410 mm stroke, to the right approx. 45° and to the left approx. 15° inclined Band length: 4700 mm Operating instructions are available. Sold only to commercial enterprises! All information without guarantee

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

Abbund Chain Saw Sauer ZKS 2033 Sword length 330 mm a replacement chain plus chain wrench available Built in 2008 This blow chain saw was little used and looks almost like new. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Saegebaender Roentgen, new

: 330 mm : 5000 mm : 450 mm : 330 mm : 450x330 mm dimensions of saw-band: 5000x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

PART NUMBER: 7548 Specifications: - Track width 250mm - shaft width 250mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top width with clearance 700mm - table top length 1790mm -in advance: -Triggers - pressure roller, smooth -Triggers - pressure roller, smooth - shaft with saws - smooth pressure shafts 2 pcs - from below: -Guide - slip shaft, smooth -Triggers -caterpillar - central lubrication - feed motor 1.1kW - main motor 30kW - Electric body lifting - manual lifting of the shaft with saws - extraction spigot diameter 160mm - total dimensions length/width/height 2250x1700x2000mm - weight about 3000kg ADVANTAGES – made in Germany – electric lifting of the body and shaft – smooth feed speed control – used multirip saw, very good condition Net price: 76900 PLN Net price: 17884 EUR dep ...

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

PART NUMBER: 7545 Specifications: - Track width 250mm - shaft width 220mm - max disc diameter 300mm - blade hole diameter 60mm - cutting height 100mm - table top width 650mm - table top length 1460mm –in advance: - 2 rows of ratchets - smooth sliding shaft - shaft with saws - smooth, sliding shaft – from below: -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - central lubrication - feed motor 1.2kW - main motor 21kW - extraction spigot diameter 180mm - total dimensions length/width/height 1700x1450x1500mm - weight about 1800kg ADVANTAGES – Italian production – DTR documentation – a solid machine – used multirip saw, very good condition Net price: 25900 PLN Net price: 6023 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A / 16A CEE plug Year of Make: 2006 Max. cutting side passage: 260 mm Max. cutting height clearance: 310 mm Table dimensions: L59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base frame Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures.

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Year of construction 1990 S/ N 24745 Machine No. 94800 Manufacturer Interholz Raimann GmbH Technical data: Width of the transport chain 430 mm The width of the shaft 650 mm Maximum cutting height 120 mm Diameter of the saw blade 350 mm Diameter of the spindle 60 mm Diameter of the sleeve 80 mm Minimum length of 69 cm 37 kW main motor Shaft speed 3000 rpm Feed motor 5.5 kW Infinitely variable 0 to 50 m / min Feed adjustable Inverter Centralised lubrication Track Automatic height adjustment of the spindle Automatic height adjustment of the rollers Upper take-off rollers Pneumatic tension rollers Centralised lubrication Overall machine dimensions: Length 330 cm Width 225 cm Height 220 cm Weight 7000 kg

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.

HBS 533 band saw new Engine: 1.5 KW/ 400 V Cutting height: 270mm Cutting width: 514mm Roll diameter 530mm Precision roller guide Band length: 3865mm Table inclination -10°-+45° Weight: 163kg

Code: 0456 Brand: MEBER - ITALY Model: BEST 800 - CE Standard Industrial band saw with feeder for wood, semi-finished products, window frames , laminated timber, beams, boards, sawmills, carpentry and various - CE Standard Features: Sturdy construction Ergonomic position of the control panel board Integral blade guard Scrapers with brass blade for good cleaning of the flywheels Flywheel diameter mm 800 Table dimensions mm 1300 x 800 Cutting capacity: height x width mm 380 x 750 Blade width mm 80 Flywheel revolutions min 700 Blade length mm 5090 Motor power Hp 20 Feeder R1 : Fitted with a toothed drive roller and a support fence with idle rollers which can be positioned manually - Roller position is adjustable - Feed speed variator Roller height mm 235 Roller diameter mm 215 Max roller-blade distance mm 290 Max distance fence-blade mm 200 Fence dimensio ...

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Thomas 310E

Bone Band Saw KOLBE K330 S Specifications: Type: Kolbe K 330 S 400 V / 50 Hz / 1.5 kW / 3.4 A Year of Make: 2014 Cutting side passage max.: 280 mm Max. cutting height clearance: 300 mm Table dimensions: L59 x D76 cm Machine dimensions: H180 x W75 x D80 cm Saw blade size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base, height-adjustable Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone flour container is included Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures. Sale according to § 25a of the Value Added Tax Act of margin taxation. A proper invoice will  ...

Max blade diameter: 450 mm Weight: approx. 700 kg Hydropneumatic saw blade feed via 2 manual operation Pneumatic material tensioners Minimum quantity spraying device Table rotatable on both sides with rest points at 45°

Wintersteiger DSG 150/200 Thin-cutting creel with center cut device and planing device Cutting width: 150 mm | Cutting height: 200 mm For sale is a professional thin-cutting creel of the type Wintersteiger DSG 150/200, equipped with a center cutting device and integrated planing unit. The machine is ideal for precise slat production with minimal material loss – especially in the parquet, furniture and solid wood processing sectors. Specifications: • Cutting width: up to 150 mm • Cutting height: up to 200 mm • Minimum fin thickness: approx. 1.5 mm • Kerf: from approx. 0.9–1.2 mm (depending on the tool) • Stroke rate: up to 450 strokes/min • Feed speed: approx. 0.3 – 1.8 m/min • Main motor power: 11 kW • Cutting accuracy: ± 0.1 mm Equipment: • Center incision device for centric incisions • Integrated planing device (double planer)  ...

Key data: 3220 mm, 1550 mm

HARWI 1550 Giraffe Vertical Panel Saw Brand: Harwi Type: Giraffe 1550 Year: 1995 M-Nr: 5000 CK Max. cutting width: 1,550 mm Max. cutting length: 3,200 mm Max. cutting depth: 50 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Motor power: 2.2 kW, 400 V, 4.3 Amp Saw blade speed: 2,800 rpm Bottom support: Yes Material support: Open back panel Small parts edition: Yes Measuring system: vertical and horizontal analogue Swivel saw head : manual Saw feed : manual Mounting : Freestanding stand Suction : Suction supports on the saw Locking saw bar : manual Suction diameter : 80 mm with built-in compressor on the saw carriage Dimensions : 4.300 x 1.910 x 1.250 m Weight: 495 KG

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

Key data: 4300 mm, 1850 mm

HARWI 1850 Giraffe Vertical Panel Saw Brand: Harwi Type: 1850 Giraffe M-No.: 5008KM Year of Make: 2003 Max. cutting width: 1,850 mm Max. cutting length: 4,300 mm Max. cutting depth: 55 mm Saw blade diameter: 250 mm Saw blade bore: 30 mm Motor power: 3.0 kW, 400 V, 4.3 Amp Saw blade speed: 2,800 rpm Bottom support: Yes Material support: Closed back panel Small parts edition: Yes Measuring system: vertical and horizontal analogue Swivel saw head : manual Saw feed : manual Mounting : Freestanding stand Suction : Suction supports on the saw Locking saw bar : manual Suction diameter : 80 mm with built-in compressor on the saw carriage Dimensions : 5,200 x 1,300 x 2,700 mm Weight: 570 KG