129,791 used machines on RESALE, but how to find them? Machine Search
New machine SPECIAL PRICE incl.: - Starter Kit 2 - Micro spray device Ready to be demonstrated in our exhibition Roller conveyors shown optional Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.1 x 0.95 x 1.7 m Auction-ID: A7-46460-416
Manual cold circular saw with: - Machine base - Support rail 1500mm Saw blade diameter 275 mm Cutting range at 90 degrees: around 80 mm Cutting range at 90 degrees: square 70 mm Cutting area at 90 degrees: flat 100 x 60 mm Cutting range at 45 degrees: around 70 mm Cutting range at 45 degrees: square 60 mm Cutting area at 60 degrees: flat 80 x 50 mm Clamping range 110 mm Speed 45 / 90 rpm Total power requirement 0.5 kW Machine weight approx. 0.07 t Space requirements approx. 900 x 700 x 1600 m Auction-ID: A7-46460-483
Manual underfloor aluminium circular saw Saw blade diameter 400 mm Cutting range at 90 degrees: around 120 mm Speed 1400 / 2800 rpm Motor power 4.0 kW Machine weight approx. 180 kg Dimensions L x W x H 1.0 x 0.9 x 1.2 m Auction-ID: A7-46460-419
Cold circular saw - Machine light - Coolant system Saw blade diameter 300 mm Cutting diameter 90 mm Speed 40/80 rpm Total power requirement 1.5 kW Machine weight approx. 350 kg Space requirement approx. 0.9 x 0.8 x 1.5 m Auction-ID: A7-46460-453
Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Pneumatic double clamping device · Pneumatic vertical clamping device · Integrated coolant spraying device MPS Control: · Saving the start / end of the cut · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.9 x 1.4 x 1.8 m Auction-ID: A7-46460-530
Cold circular saws with: Saw blade diameter max.350 mm Cutting range: around 110 mm Cutting range: square 100 mm 2 saw blade speeds Machine weight approx. 0.65 t Space requirements approx. 0.8 x 1.0 x 1.85 m Condition: unchecked (6) Auction-ID: A7-46460-531
Semi-automatic long-cut cold circular saw: - With mitre adjustment left 50°, right 60° - Digital cutting angle display - Feed speed hydraulically adjustable - Hydraulic workpiece clamping - 4 spare saw blades Saw blade diameter 510 mm Cutting diameter 150 mm Cutting area at 90 degrees: flat 450 x 150 mm Cutting range at 90 degrees: square 150 mm Speed 29 / 58 m/min. Total power requirement 4.2 kW Weight 1.55 t Dimensions L-W-H 1.8 x 1.7 x 1.7 mm Auction-ID: A7-46460-460
Hydropneumatic semi-automatic - Mitre left/right 45° - Head oblique cuts up to 45° (Schifter) - Ball-bearing table - Pneumat. Double clamping device - Machine base with mist spraying device - Chip extraction nozzle on saw blade protective cover Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.27 t Dimensions L x W x H 1.1 x 0.95 x 1.7 m Auction-ID: A7-46460-614
The assembly saw with elaborate standard equipment and a large cutting range · For mitre cuts on the left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminium profiles · Automatic cooling directly on the saw blade · Safety switch 24 V in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool incl. saw blade HSS 250x2,0x32mm, 128 T/ZT 6 +NL Optional: Machine base type 20505 (125,-EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: around 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting range at 45 degrees: around 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t Condition: never used / new (5) Auction-ID: A7-46460-555
Saw blade 315mm Cutting diameter 105mm Motor 1.5KW Mitre 45°/60° Speed 17/35m/min See pictures Auction-ID: A7-46460-516
Fully automatic hydropneumatic machine · Mitre left/right · Head oblique cuts up to 45° (Schifter) a. b. · Material feed unit with material hold-down device · Integrated coolant spraying device · MPS Control: · Saving the start / end of the cut · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.59 t Dimensions L x W x H 1.9 x 1.4 x 1.8 m Auction-ID: A7-46460-433
Machine type: Aluminium cutting machine Manufacturer: Pertici S.p.A. Model: Univer 330 P Technical data: - Application: Cutting of aluminium and light alloy profiles - Saw blade diameter (D): approx. 330 mm - Cutting type: single head circular saw - Cutting angle: adjustable (manual) - Feed: pneumatic Electrical data: - Total power: approx. 2.2 kW - Voltage: 380 V - Frequency: 50 Hz - Current: approx. 6–7 A Pneumatic data: - Operating pressure: approx. 6–7 bar Equipment: - Pneumatic clamping system - Manual angle adjustment - Safety guard for saw blade Remarks: Machine used in aluminium profile processing; nameplate partially unreadable; functionality not checked. Auction-ID: A7-46477-5
saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180 x 100 mm saw blade turning speeds: 3000 U/min total power requirement: 2,2 kW weight of the machine ca.: 0,51 t dimensions: 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.
Manual pull-down miter saw with metal support bench Estimated weight: 80 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-46655-157
380 V 1.5 KW Length 0.6 m Width 0.5 m Height 1.40 m Color: Gray Weight 98 kg Unaudited Hobbyist object
Aluminum Circular Saw Machine - Discharge roller conveyor 4000mm with handwheel, foldable stop and digital system - Feed roller conveyor 3500mm - Transport dimensions 6.0m x 2.0m x 1.6m Saw blade diameter 400 mm Cutting range at 90 degrees: around 130 mm Cutting range at 90 degrees: square 110 mm Cutting area at 90 degrees: flat 180 x 100 mm Saw blade speeds 3000 rpm Total power requirement 2.2 kW Machine weight approx. 0.51 t Dimensions L x W x H 3.8 x 1.6 x 1.7 m Auction-ID: A7-46460-648
Machine: Motorized saw with turntable Engine: 12 kW direct, 3000 rpm Blade: Ø650 mm carbide Cutting heights: 90° = 245 mm / 45° = 164 mm / 30° = 113 mm Blade inclination: 90° to 30° (servo) Turntable: 0-270° motorized (servo) Equipment: laser indicator, aluminium stops 120x120 (3 m + 5 m), L/R roller conveyors (3-4 m), safety light curtain, PVC cover, 320 mm discharge tables, mesh panels, linear support 1660 mm Clamping: Pneumatic vices L/R, 2-hand bending device, table clamping cylinder with brake Length measurement: servo system with material valves, roller tracks 3-14 m Options included: Multi-length LiVoMat, GAMA 65V pneumatic side feed, additional conveyors, speed sensors Safety: full cover + multiple protections Auction-ID: A1-46801-17
Saw blade diameter: 520 mm Bore diameter: 50 mm Nominal voltage: 400 V Table dimensions: approx. 900 x 700 mm incl. SCHEPPACH ha 1000 extraction Auction-ID: A7-46287-186
max. speed: 4000 rpm max. saw blade diameter: 305 mm ID: 30 mm max. cutting depth: 102 mm for further technical data see nameplate Auction-ID: A7-46287-187
Includes length measurement system. Cutting range: 100x200 mm Auction-ID: A1-41996-101
Automatic material feed Auction-ID: A1-41996-100
Security saw does not work. Workbench/support workbench dimensions: 155x68x101 cm. Warehouse trolley with vice dimensions: 128x69x98 cm Auction-ID: A1-41996-108
Equipped with: cutting range 260mm, variable speed, 4 extra saws Auction-ID: A1-41996-87
Function: This machine is designed for precise cutting and mitre cuts and has a swivel and tilting sawing unit, including accessories such as spare saw blades Auction-ID: A1-46862-29
with replacement saw blades Auction-ID: A1-46862-31
Manual: saw feed and clamping device, mitre: 45-90-45- 30 degrees, Including: roller track 525 cm long with length stop up to 5000mm, and chip container, as well as spare saw blades for steel, VA and Allu, coolant lubrication available, gear version adjustable with two speeds, Auction-ID: A1-46862-14
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg Auction-ID: A1-40256-90
Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg Auction-ID: A1-40256-136
A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.
Sliding table saw Felder type K 940S Technical data: - Table length (mm): approx. 3000 - Power (kW): 5.5 - Scoring machine: included - Saw blade: swivelling
Sliding table saw Altendorf type F45 CE Technical data: - Table length (mm:) approx. 3000 - Saw blade: swivelling - Scoring machine: included - Main motor power (kW): 5.5 - Power (kW): 0.75
Additional features Spindle lock, soft grip Works on Mains power Drive Power consumption 1050 W Features Axle hole 20 mm Maximum speed 5200 rpm Variable speed No Miter function (tilt L/Rº) Yes Saw blade diameter 165 mm Saw attributes Cutting depth at 45º miter 37.5 mm Cutting depth at 90° 54.5 mm Specifications EAN 0088381806404 Article number 110993 Model Code HS6601 Dimensions Length 296 mm Weight 3.7 kg Height 243 mm Width 232 mm Included as standard 1x Makita HS6601 circular saw 1x Width guide 1x Dust extraction nozzle 1x Saw blade wood 165x20x2,0 10T 20g 1x Allen key Auction-ID: A1-46851-354
saw cap. Ø 130 mm; Table dimensions. approx. 780x400 mm Auction-ID: A1-46386-8
saw cap. Ø 130 mm; table Ø 550 mm Auction-ID: A1-46386-9
table Ø 550 mm; Equipped with roller conveyor Auction-ID: A1-46386-36
Saw blade max Ø 500mm with infeed and discharge table, length measuring system (7200mm), touchscreen Auction-ID: A1-46623-2
Equipped with laser Auction-ID: A1-46651-1002
Equipped with laser Auction-ID: A1-46651-1003
Consists of; 1x circular sawing machine: 1x guide; 1x vacuum cleaner Auction-ID: A1-46651-40
Equipped with lamp and laser Auction-ID: A1-46623-21
Equipped with saw guide with micro adjustment Auction-ID: A1-46623-3
maximum number of results exceeded
please refine your search
5.000 € 
