131,208 used machines on RESALE, but how to find them? Machine Search
SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996
SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999
Cutting height: 60 mm saw-blade dia.: 350 mm Motor output: 5,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm
Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.
used
Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.
AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600
From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm
- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head
Input lengths min/max. 3000 - 5000 mm average 4000 mm Input widths min/max. 80 - 200 mm Input strengths min/max. 38 - 80 mm Timber cross-sections max. 200 x 50 Generally rectangular max. 150 x 80 mm Wood end length min/max. 700 - 1000 mm, average 800 mm Number of cuts / board on average 5 Curvature of the timber in all directions max. 10 mm per metre length Thickness tolerance +/- 3 mm Cut/cut tolerance +/- 0.8 - 1.5 mm (for wood texture with minimal resin content and even surface. min. tolerance up to 1 m fixed length max. tolerance for longer parts up to 2.5 m). Wood types: Softwood or hardwood Capacity of the system: Feed speed, max. 180 m/min. Infinitely variable Time per cutting operation, incl. brakes, 0.7 - 1.2 sec. Capping, Accelerating In order to obtain the practical output per day, it is necessary to work with one of the production ratios o ...
Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...
"RSA Heavy Duty Sawing, Deburring, Cleaning and Drying Center" for Steel Pipes The machining center consists of: 1) RSA Precision Speed Saw RASACUT SC 3000 with Bundle Loader 2) RSA linkage between the RSA RASACUT precision high-speed saw and the RSA RASAPLAN XY 3000 deburring system 3) RSA deburring system RASAPLAN XY 3000 4) Extraction system/wet separator for RSA deburring system RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for pipes up to 6,200 mm TECHNICAL DATA Lswvuey E Iype Nu Iehf Tube Ø: 6 mm to 55 mm Wall thicknesses: 1 - 6 mm Bar weight: max. 10 kg/m Materials: Steel Magnetism: max. 3 gauss Output lengths: 6200 mm sawable lengths: 150 - 3000 mm Limitation: Ø 6 – 7.9 mm max. length: 1200 mm Ø 8 – 9.9 mm max. length: 1500 mm Ø 10 – 12 mm max. length: 2000 mm Length tolerance ...
Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Key data: 300 mm
SPECIFICATIONS: Saw blade diameter mm: 300 Bore mm: 30 Max. material thickness at 45?: 60 mm Installed power: 3.0 KW Revolutions: 3000 rpm Max. cutting width mm: 600 Complete with 2 roller tables of 3500 mm and 1500 mm with electronic positioning stop 2 Pneumatic stops
Vertical Trend and Slit Band Saw Fabr. Raimann Type B 11 Built in 1983 Roller diameter 110 mm Roll width 100 mm Speed -580 rpm Engine 18.5 Kw Cutting width R/L of sheet-200 mm each Cutting height 200 mm Feed continuously variable 10-40 m/min 1.5 kw Band saw blade length 6300-6500 mm Electro-motor blade clamping Pneumatic roller slide adjustment
Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates
Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new
Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)
Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230
Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100
Multi-blade circular saw Raimann, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Morsoe mitre punch, various, in good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Metal Band Saw Saw blade welding machine, grinder Swivel table 380 V 16 A Electrics must be checked. Saw Blade Compressor for air blowing.
Machine: joining, veneer cutting machine Brand: Langzauner Type: LZ 4/2E 3.050 Year of Make: 1998 CE Specifications: Working length: 3,050 mm Cutting height: 45/55 mm Motor power: 2.2 kW each Suction duct: Yes Support table rear: Yes, 3,050 x 500/800 mm, with hinged insertion shoes for stop depth 800 mm Rear Rip Fence: Yes, 650/ 800 mm, incl. digital display Rack & Pinion Balancing: Yes Milling unit: Yes Front support table: Yes, movable Saw carriage feed: via electric motor drive and Stepless speed control
MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg
I sell an automatic pneumatic cross-cut saw GreCon Dimter 2004, built in 1992. Entrance table automatic / continuous system Exit table 3 ejectors on the left outlet table. Length: 15.50m Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. Spare parts and documents included.
Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm
AUTOMATIC MULTI RIP SAW model KUANG YUNG MRS 350 - TAIWAN cast iron machine structure CE regulation: YES with instruction booklet and CE declaration of conformity electric lifting pressure unit automatic lubrication of the carpet Technical details : max.height of cut mm.135 max.working width mm.350 minimum length of cut mm.650 max.diameter of blades mm.405 min.diameter of blades mm.300 arbor sleeve mm.70 main motor power Hp 50 feed motor power Hp 2 motor power lifting pressure group Hp 1 arbor speed rpm 3000 variable carpet advancement speed. from 7.3 to 30 m/min. net weight kgs.2400 volt. 380/50
Motor 1.5 kW/400 V/50 Hz/16 A, table 450x500 mm swivel 45°, wheels saw blade 400 mm, belt guide bottom+top, max. saw height 225 mm, rip fence 450x90 mm, suction nozzle 100 mm, incl. saw blades 2 pcs. 10 mm and 3 pcs. 20 mm, bearings of motor and impellers have been renewed, control and drive belts have been renewed
Auction-ID: A1-45995-19
maximum number of results exceeded
please refine your search
15 € 
