126,698 used machines on RESALE, but how to find them? Machine Search
Height=1.9 m, Overall length= 1.3 m, Overall width= 3.5 m, Net weight= 1110 kg,
Height=2.12 m, Overall length= 0.9 m, Overall width= 2.3 m, Net weight= 1110 kg,
Height=2.03 m, Overall length= 0.75 m, Overall width= 2.12 m, Net weight= 815 kg,
Height=2.12 m, Overall length= 0.9 m, Overall width= 2.4 m, Net weight= 1035 kg,
Height=1.26 m, Overall length= 0.5 m, Overall width= 1.7 m, Net weight= 120 kg,
Production line is in good condition
A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.
Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.
Height=1.8 m, Overall length= 1.9 m, Overall width= 0.85 m, Net weight= 640 kg,
Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm
Spoellijn 1000 mm: 1. Coillift 10 ton 2. Afrolmachine 10 ton 3. Dimeco stijltang 4. Dimeco Microfeeder 5. SCMB 650 TON Hydro ponspers VERKOCHT (niet meer leverbaar) 6. Heilbronn-feeder, na persen 7. Rollenbanen 8. Profileerlijn 1000 mm GEGOLFD PROFIEL NIEUW TYPE CHIEF PHENIX
Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software
Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons
Inv. Num. : 8726 Type: VL 1750 Producer: Koplast Created: 2009 Parameters: Total power: 39.6 kW Length: 3200 mm Width: 2300 mm Height: 2950 mm Weight: 1500 kg Equipment: Technical documentation The machine is equipped with: Digitally controlled top and bottom heating BECKER vacuum system Infinitely adjustable table stroke Manual and automatic control Suitable for plastic molds (PVC/PMMA/PET/PC/ABS...)
Rheon Cornucopia Type: KN200 Pieces of dough: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on castors Height: 160cm Width: 80cm Depth: 150cm
Used machine in top condition Edge milling machine for simultaneous upper and lower flush milling of protruding edges such as PVC, ABS, melamine and real wood veneer. Milling of the edge can be carried out on square, round, curved, workpieces with outer and inner radius. The machine is the ideal complement to the edge banding machine B 56, B 560. The two vertically operating HF flush milling motors, 18000 rpm, are equipped with indexable insert knives (R=2 mm). With driving equipment. Pull-out support at the front. Pneumatic excavation. Control panel position : top Total connection: 2 kW Working height or feed table height : 850 mm Workpiece thickness (radius milling): approx. 16-55 mm Workpiece width min. approx. 30 mm Edge thickness: 0.4-3.0mm Inner wheels min. approx. 50 mm Weight approx. : 155 kg Dimensions : approx. 1000 x 750 mm
A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.
Double Filling Hand Former Casting Line, 2 unit May contact me at: sywee@topglove.com.my
NEW, 219 kg weight, 2 cylinders, with Euro mount
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
Pallet fork 2 t with Bobcat 90 cm holder, FEM2, tine carrier 102 cm
2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount
NEW, FEM3A, 4.5 t load capacity, with 120 cm long tines, with Manitou attachment, 246 kg dead weight
NEW, - 150cm width, - 219 kg dead weight, - 2 cylinders, with Merlo mount, photos are only an example !
NEW Pallet fork 1200 x 120 x 50 mm FEM 2A 2.5 t load capacity Carrier width 1.20 m with Liebherr 506 attachment
BIG pallet fork with Bobcat 114cm attachment, NEW, - Pallet fork 1200x80x40 mm, - FEM 2A, - Capacity: 2000 kg, - Carrier width: 1.20 m, - mass: 159 kg, with Bobcat 114cm attachment
BIG pallet fork with Bobcat 114cm attachment, NEW, - Pallet fork 1200x80x40 mm, - FEM 2A, - Capacity: 2000 kg, - Carrier width: 1.20 m, - mass: 159 kg, with Bobcat 114cm attachment
NEW, pallet fork 200 cm wide, 4.5 t tines, 120 cm long tines, with Volvo BM mount
NEW: FEM3 holder, 3.5t pallet tines, beam width 120cm
suitable for forklift Telelader and wheel loader with standard Pallet rack attachment
180cm extension length, Suitable for tines up to max 130x50mm, ⬠230,- excl. VAT (per pair)
180cm extension length, Suitable for tines up to max 130x50mm, ⬠230,- excl. VAT (per pair)
180cm extension length, Suitable for tines up to max 130x50mm, ⬠230,- excl. VAT (per pair)
Pallet fork extension, 180cm extension length, Suitable for tines up to max 130x50mm, Price per pair excl. VAT.
BIG bale fork with gripper, Technical data typical for: MHFRED34HD, - Load capacity: approx. 1,800 kg, - Dead weight: approx. 300 kg, - Number of tines: 3 main tines (for better grip of large bales), Area of application: Round and square bales, silage, hay
Pallet fork 120cm, - with Manitou pick-up, - 3.5 tons
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours
Formwork panels 21mm, used 1,777 m² used formwork panels 21mm EUR 11,00 per m² ---------------------------------------------------------------------- --------- Plywood 21mm, used 1.777 m² used plywood 21mm EUR 11,00 per m²
A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.
BIG pallet fork Volvo BM mount 2000 mm, - FEM 3, - Load capacity up to 4 t, - 2000 wide
used
2 used stair formwork Howal Varioplus, type G III 18/150, sharp-edged hydraulic stair formwork maximum 18 steps, maximum running width 1.50 m, production of right- and left-handed prefabricated stairs, max. running width 1.50 m on 18 inclines, adjustable. Step side, transversely moved. Steel floor Steps are infinitely adjustable for gradients of 160-200 mm Steel floor for different running thicknesses between 80-200 mm horizontally adjustable Stair formwork is hydr. adjustable
used
Varitop combi stair formwork for the production of straight-running precast stairs with landings in an overhead or lateral position max. number of steps 18 (type 18/160), running width max. 1.60 m (parking plus holding magnet must still be subtracted from the nominal dimension) Gradient stepless between 150 mm & 200 mm Stepless tread between 250 mm and 310 mm Thickness of the dimensions varies between 100 mm and 250 mm Platform length max. 160 m, platform attachment possible from the 4th step at each step
Key data: 1000 mm, 18 kN
TC120Bj. 1992 against highest bid Partially overhauled with tools Working area y1000 x2000 with resetting Bosch control with graphics programming Tool Changer 9Stations /2Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Key data: 1300 mm, 22 kN
TC500Bj. 1995 against highest bid Partially overhauled with tools Working area y1300 x2500 with resetting Bosch control with graphics programming Tool Changer 20Stations /3Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Key data: 1500 mm, 22 kN
TC500 Bj.1999 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
maximum number of results exceeded
please refine your search
