circular saw for used for sale

Description: Machine number: 99-58009 Power: 1.8 kW Saw blade diameter: 250 mm Suitable for mitre cuts Max. clamping width: approx. 90 mm weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 800 x 660 x 1,450 mm

Description: - Serial number: 10.002PK - Table size: 710 x 900 mm - Saw blade diameter: 250 mm max - Saw blade bore: 20 mm - Motor speed: 2800 rpm - Saw shaft speed: 3800 rpm - Cutting height 90°/45°: 82/55 mm - Motor power: 3,1 kW weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 950 mm

cutting diameter: 145 mm miter: ja pneumatic lifting portal: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 380 V stroke: . mm : . square: 1200-100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 145 mm : : zwei Geschwindigkeiten cooling: ja type: 41103M00U2 mm : 6791 volt: 400 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 1,900 mm, weight approx.: 1,000 kg

Description: Including roller conveyor  , Attention: without visible material Approx. Onsite Dimension. (l x w x h): 5,000 x 1,900 x 2,200 mm, weight approx.: 3,000 kg

Description: Machine number: 2867/1119 Table dimensions: 850 x 700 mm Saw blade can be tilted 45° Incl. mobile extraction system from the manufacturer SPÄNEX Approx. Onsite Dimension. (l x w x h): 4,000 x 1,500 x 2,400 mm, weight approx.: 300 kg

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

Description: Saw blade 250mm Connection voltage 400 volts Power 0.8 KW Cutting diameter 70mm Miter right max. 45° weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,500 mm

Description: The assembly saw with elaborate series equipment and a large cutting range · For mitred cuts on the left up to 45 ° · For sawing steel, stainless steel and aluminum profiles · Cooling system directly on the saw blade · 24 V safety switch in the handle with restart protection · 38 kg Complete weight = easy to transport · Length stop, assembly tool Including saw blade HSS 250x2.0x32mm, 128 Z / ZT 6 + NL Optional: Machine support type 20505 (125, -EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: about 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting range at 45 degrees: about 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t weight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 300 x 800 x 750 mm

Description: Semi-automatic - pneumatic. Stretcher - Footswitch Saw blade diameter 400 mm Cutting diameter 130 mm Speed range 2800 rpm Machine weight approx. 220 kg Dimensions L x W x H 700 x 600 x 1700mm Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,700 mm, weight approx.: 220 kg

Description: Equipments: - HM saw blade - Feed roller conveyor 7500mm - Roller conveyor with stop system 1500mm - Machine without workpiece clamp Saw blade diameter 350 mm Cutting diameter 120 mm Speed 1700/3400 rpm Saw blade dimensions 350 mm Cutting area at 45 degrees: flat 135 x 60 mm Cutting area at 45 degrees: around 120 mm Cutting area at 90 degrees: flat 180 x 70 mm Cutting area at 90 degrees: square 105 mm Machine weight approx. 0.6 t Dimensions L x W x H 1600 x 800 x 1700 m weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,700 mm

Description: Aluminum miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet Saw blade diameter 400 mm Cutting range at 90 degrees: around 130 mm Cutting area at 90 degrees: flat 160 x 130 mm Cutting range at 45 degrees: around 110 mm Cutting area at 45 degrees: flat 110 x 125 mm Saw blade speeds 3000 rpm Total power requirement 1.75 kW Machine weight approx. 140 kg Dimensions L x W x H 3,0 x 0,8 x 1,4 m weight approx.: 140 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 800 x 1,400 mm

Description: Demonstration machine Machine for cutting tubes and profiles made of steel, light metal, plastic, non-ferrous metal and composite materials. Saw blade diameter 355 mm Cutting area at 90 degrees: around 115 mm Cutting area at 90 degrees: square 120 x 106 mm Cutting area at 90 degrees: flat 102 x 197 mm Saw blade holder diameter 25.4 mm Connection voltage 230V Total power requirement 2,3 kW Machine weight approx. 28 kg Dimensions LxWxH 0.6 x 0.35 x 0.45 m weight approx.: 28 kg, Approx. Onsite Dimension. (l x w x h): 600 x 350 x 450 mm

Description: Saw blade 315mm (max. 350mm) Speed 30rpm Cutting area around 100mm Connection voltage 400 volts coolant pump including base cabinet weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 900 x 600 x 1,500 mm

: gebraucht : 1991 : 6252 : prompt, Zwischenverkauf v : Deutschland : 1450 € : 1 : 250 mm : 4500 U/Min : ca. 70 mm Höhe : ca. 48 mm Höhe : 2.2 kW : 950 mm : 950 mm : 950 mm : 156 kg Saw blade tiltable 90 - 45° Longitudinally movable Angle gauge +/- 45° Without operating manual Does not comply with the german UVV and austrian AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Saw blade diameter 400 mm Cutting diameter 130 mm Stroke 150mm Profile size - max. 315 x 40 mm cutting speed 13, 25 m/min Total power requirement 2.6 + 1.5 kW weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 950 x 1,650 mm

Description: - miter cut possible - Vertical precision guidance - 2 speed levels - Roller conveyor - Coolant device weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 900 x 1,850 mm

Description: serial number: AB/128460 Technical specifications: Dimensions for pieces to process minimumum squaring: : length 30 mm, width 50 mm maximumum squaring: : length 3200 mm, width 3200 mm saw angle adjustment 0 - 45° minimumum for cutting with paralel guide: 10 mm maximumum for cutting with paralel guide: 1270 mm minimumum height: 3 mm maximumum height: 100 mm with saw blade 315 mm diameter, at 90° maximumum height: 70 mm with saw blade 315 mm diameter, at 45° minimumum / maximumum diameter saw blade: 250 / 315 mm (inner diameter 30 mm) vitesse de rotation saw blade: 4000 rpm scoring blade diameter: 120 (inner diameter 20 mm) vitesse de rotation scoring blade: 8000 rpm fixed table dimensions: 900 x 550 mm mobile table dimensions: 3200 x 360 mm Approx. Onsite Dimension. (l x w x h): 5,200 x 2,400 x 1,700 mm, weight approx.: 770 kg

Description: • Total amount approx. 41 pieces: • Approx. 9 pieces: external diameter 180 mm, inner diameter 35 mm • Approx. 6 pieces: external diameter 180 mm, inner diameter 50 mm • Approx. 2 pieces: external diameter 200 mm, inner diameter 80 mm • Approx. 2 pieces: external diameter 240 mm, inner diameter 130 mm • Approx. 6 pieces: external diameter 120 mm, inner diameter 22 mm • Approx. 5 pieces: external diameter 420 mm, inner diameter 80 mm • Approx. 2 pieces: external diameter 470 mm, inner diameter 82 mm • Approx. 3 pieces: external diameter 350 mm, inner diameter 30 mm • Approx. 6 pieces of several types and diameters Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 250 mm, weight approx.: 70 kg

Description: Rohbi saw with loader saw blade diameter: 250 mm, total power requirement: 2 kW, weight approx.: 1,300 kg, Approx. Onsite Dimension. (l x w x h): 6,400 x 2,200 x 1,800 mm

Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.

Segment saw blade: 400mm x 4mm x 50mm. Working range: round material 90°/45°: 130mm, square material 90°/45°: 120mm/110mm, flat material 90°/45°: 305mm x 20mm/245mm x 30mm, U-profile upright 90°/45°: 120mm x 55mm, U-profile horizontal 90°/45°: 240mm x 85mm/180mm x 70mm. Cutting speed with saw blade 400mm in m/min: 13/26 or 10/20 or 15/30. Feed rate: 0-3300mm/min. Dimensions X/Y/Z: 800mm/1070mm/1780mm, weight: approx. 850kg. Available from June, 2024. Documentation available. On-site inspection is possible.

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

Case erector APE model Form 1200 Year: 1998 Speed: 900 c/h Gluer Mesa Included conveyor

Carton forming machine APE mod. FORM 1200 BB Machine for bag in box Speed: 900 c/h Year: 2001 Hot melt closing box. Safety protections.

Box forming machine APE – FORM 1200 HM Year: 1996 Speed: 900 C/H Gluer NORDSON Safety protections.

Box forming machine APE BAG IN BOX | FORMA BB HM Year: 2012 Speed: 1.000 cartoni/h Machine without gluer Safety protections.

Box forming machine TMG | FORMEC Year: 2002 Speed: 5.000 bph Gluer NORDSON Safety protections

Box forming machine SGE | 2007 Year: 2007 Speed: 8.000 bph Model: Formacartoni Gluer included Safety protections

Forklifts, forks, forks with anti-slip coating Payload: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carrier height: 405 mm - suitable for tine holder: FEM 2 Form B - Rubber coating as anti-slip coating and for protecting transported goods ? Rocker arm lock Net weight: 145 kg mint condition, unused For a 2.5 ton. Forklift.; used

Slab formwork, wall formwork, wooden beams, props, formwork accessories used immediately operational. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. Note also our other ads! We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us!

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

Case erector MONDO & SCAGLIONE hot melt mod.378-C Year: 2006 Speed: 6/25 C/MIN Hot melt Gluer System PREO PLC Siemens S7 Safety Protections

Case erector OMA hot melt – mod. AC 1000 HM Year: 2016 Speed: 2.000 cases/hour Machine suitable for american cartons Gluer Nordson Control panel with PLC and touch screen Safety protections CE

Box forming machine MONDO&SCAGLIONE Model: 376/c. Year: 1996. Speed: 23 cycle/minute. Gluer NORDSON. Type of clousre: glue. Manual available. Safety protections.

Box forming machine EUROTEMA - FC-2000HM Year: 1997. Speed: 2.000 cartoni/ora. Model: FC-2000HM. Type of box: American. Closure system hot-melt. Safety protections.

Feed boxes Bortolin Model: Feed boxes Year: 2004 Speed: 15.000 b/h Safety protection

Box forming machine – KETTENER Year: 1997 Speed: 12.000 bph Model: KAF 2000 R Safety protections.

Box forming machine SIAT – 150 C/H Year: 2015 Speed: 10 C/minute Closing box with adhesive taps. Safety protections.

Box forming machine BORTOLIN – FOC 23/30 Year: 2000. Speed: 8.000 bph. Model: FOC 23/30. Gluer NORDSON. Safety protections.

Box forming machine MONDO&SCAGLIONE | 378/C Year: 2005 Speed: 1.500 boxes/h Model: 378/C Formation of the horizontal carton Gluer NORDSON Safety protections

Box forming machine BORTOLIN-KEMO Year: 2006 Speed: 7.000 bph Model: Formatrice cartoni Gluer Safety protections

Box forming machine OMA | 40 HM Year: 2009 Speed: 6.000 bph Gluer Safety protections

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

LPG forklift, gas forklift STILL type RX 70-16T Series No. 517314G00021 Year of construction 2016 Nominal load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carrier width 980 mm Construction height 2160 mm Total width 1100 mm Total length without forks 2200 mm Net weight 3040 kg - Triplex mast with full free stroke 1550 mm - hydraulic side shifter - LPG electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - hydraulic auxiliary steering - front work light- reversing - warning light (blue) - rear hazard warning lights (yellow) - 4-wheel super elastic, solid rubber - front tires 18X7-8 SE / rear 18X7-8 SE - according to operating hours counter 22663 operating hours - New TÜV-UVV test good condition; used

Diesel - Forklift, compact stacker MORA type M80CS Fabr. No. 20087 Year of construction 2006 Nominal load capacity 8 ton. Lifting height 3800 mm Fork length 1800 mm Fork carrier width 1460 mm Construction height 3030 mm Total width 1460 mm Total length without forks 3350 mm Net weight 12740 kg- Duplex mast with 1950 mm Free stroke - 4 cylinders PERKINS diesel engine - completely enclosed cab with heating - electrohydraulic tilting device for the cab - hydraulic auxiliary steering - 2 work lights front, 1 piece work light rear - yellow warning - flashing light on the canopy - solid rubber tires (front 28 x 10 x 22) (rear 250/70 - 16) - 9646 operating hours read - UVV-TÜV approval New good condition rental on request; used

Circular tester for crankshafts, camshafts, rotor shafts, etc. Reworked. Tip width 440 mm Peak height 200 mm Bed re-ground. Device repainted Dimensions: LxWxH 1000x600x1100 mm Weight approx. 300 Kg Colour: Light grey

Basic refurbished belt circular operator SBR 2500 New chassis made of stainless steel New tapes New electrics Mehler Completely disassembled and rebuilt. 6 Month Warranty Immediately available