circular saw for used for sale

Key data: 360 mm, 45 °, 110 mm

Saw motor, pole-switchable approx. 1.0 / 1.8 kW Saw blades 360 mm 6 cutting speeds : 16 / 20 / 25 m/min 32 / 40 / 50 m/min Cutting range 90 degrees with blade size 360 mm : round 110 mm flat 200 x 80 mm Weight approx. 560 kg

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

pole-switchable motor 1.7 / 2.2 kW Saw blade size max. 275 mm Cutting speed approx. 40 / 80 rpm Mitre infinitely variable by 90° to the left and by 90° to the right Cutting area approx. : 90° profile , square / round : 80 / 80 mm

Double mitre saw OMS INVINCIBLE OK Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power: 2×2.2kw Saws 320mm Pneumatic material clamping Net price

Used FIMAL CONCEPT 350 PLUS electronic sliding table saw support surface between the columns mm. 3850x770 Squaring length mm. 3800 blade diameter mm. 350/300 STANDARD EQUIPMENT: EC Legislation - Full-length presser with anti-intrusion strips front and rear of the blade - Fixed front shelf of 1000x510 mm in phenolic material complete with squaring guide up to 2500 mm with telescopic stop - Fixed rear shelf of 1000x400 mm in phenolic material with double electronic rotary stop guide with opening up to 1300 mm. Wheelbase between rear stops 400 mm - 1000x500 mm sliding table in phenolic material that can be positioned both front and rear - Photocell for reading the length of the panel for the automatic adjustment of the stroke of the blade carriage - Mechanical adjustment of the engraving depth with mechanical display Control panel on mobile trolley including: Programmer with m ...

Raimann KR 310 E 340/120 multi-saw with movable disc - German production - year of production 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum element length 700 mm - table width 740 mm - feed adjustable on the inverter 6-48 m/min - three rows of pawls - possibility of putting on a shoe - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electric cutting height adjustment - electric shaft height adjustment - four upper pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Machine dimensions 250x200x220 cm weight 2000 kg

Sliding table saw SCM SI16 Carriage length 1500mm Cutting width on the right side 1000mm Maximum cutting height 110mm Saw min/max: 200/350mm 45° swivel saw Saw speed variable on the belt 3200/4500/6000rpm Scoring speed 9800rpm 4kw main motor Scoring Motor 0.75kw

Three crosscut saw MADREW DCKRR40 - year of production 2008 - user manual, CE - Polish manufacturer TECHNICAL PARAMETERS: 3 x 4 kW motor maximum cutting thickness 100 mm maximum cutting length 2940 mm maximum cutting width 300 mm minimum cutting length 460 mm disc diameter 400 mm feed speed smoothly adjustable 5-25 m/min spigot diameter 3 x 100 mm feed motor 0.75 kW rotational speed 2900 RPM dimensions (length/width/height) 450 x 140 x 140 cm weight 950 kg

Offer 20507 Specifications: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Mitre adjustable left + right - Drive 400 V / 2.0 kW - Pneumatic connection 6 bar - Space requirement approx. W 700 x H 1500 x D 900 mm - Weight machine approx. 80 kg - with: - Saw blade - Clamping vice - Micro spray lubricant device - Stop rail 3000 mm

Underfloor aluminium circular sawing machine Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - Parallel stop

Key data: 235 mm

used, functional

Key data: 45 °, 3000 mm, 850 mm

Equipment: - Cutting height and angle electronically controlled - Cutting width can be adjusted electrically via control - Length stop with continuous system, cutting length 60 mm - 2120 mm, extendable up to 3300 mm - Table size: 850 mm x 1050 mm in cast iron - Table extension over full table width - Transverse table dimensions 1340 x 650 mm, angle cuts according to scale without moving the fence; Fixed positions for 0°, 22.5°, 30° and 45° cuts - Extraction connection Ø 100 and 120 mm - Control via 5.7" touch screen via control panel at eye level - With document holder on the control panel - 3-axis scoring unit, electrically adjustable, pneum. can be closed/lowered Specifications: Trimming table length 3.0 m Cutting width 850 mm Saw blade swivel 0°-46° Cutting height max. 130 mm (saw blade Ø 400 mm) Table height 900 mm Motor power 5.5 KW (7.5 HP) 400 V-50 Hz  ...

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc

Key data: 45 °, 3200 mm, 1250 mm

Used sliding table saw Int. Art. Ref. m3517 Manufacturer: Panhans Type 690 Built in 1992 With scoring machine Electrical. Drive and digital display for Saw blade swivel and rip fence method Electrical. Saw blade height adjustment Digital display on longitudinal stop Carriage length 3.20 m Weight approx. 1,000 kg With wiring diagram With mitre cutting angle Neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excl ...

Description: Saw blade diameter: 300 mm Table dimensions: 470 x 450 mm weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,700 mm

Key data: 350 mm

Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Coolant lubrication

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices

Description: Machine number: 548 Operating voltage: 400 V Frequency: 50 Hz Saw blade diameter: up to 370 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,950 mm, weight approx.: 400 kg

Carriage 3m40 Main motor: 5.5 kW Speeds: 3000, 4000, 5000, 6000rpm Sawblade tilting: -45 ? / 90 ? motorized automatic Sawblade rise, fall and tilt motorised Motorized automatic right stopper 1m35 Cross fence for cutting up to 3m20 automatic motorized Max sawblade 450mm

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° approx. 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. infinitely variable - Coolant device - Material replenishment machine ( clamping arm can be folded away ) - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

: 190 mm work piece - max.: 120 mm saw diameter: 370 mm turning speeds: min. 18 U/min turning speeds: max. 36 U/min total power requirement: 2,4 kW weight of the machine ca.: 0,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optymalizerka Metal Technika OWD 1600 - produkcji Polskiej - rok produkcji 2017 PARAMETRY TECHNICZNE: - szerokość cięcia 250 mm - wysokość cięcia 120 mm - Wydajność Od 3 200 do 8 150 mb /8 h - stół sortujący z 5-ma wybijakami - Elektronika Sterownik z wyświetlaczem dotykowym kolorowym „MITSHUBISHI” - Funkcje - pełna optymalizacja 30 wymiarów w dwóch klasach jakości, - tworzenie programów cięcia dla różnych klientów, - ciecie w miejscu zaznaczenia kredką fluoroscencyjną, - obcinanie marginesu (początek i koniec materiału wejściowego) - cięcie pakietami (kilka elementów na raz) - liczniki metrów, total, zmiany, operatora, miesięczny, - dokładność cięcia ±0,2 mm - Silnik 5,5 KW (piła Ø500 – 140z) - Szerokość mat. wejściowego 12 - 250 mm max. szer/wys ( 250 / 50 mm) - Wysokość mat. wejściowego 12 - 120 mm max. wys/sze ...

Key data: 45 °, 3200 mm, 1200 mm

Used sliding table saw Int. Art. Ref. m3527 Manufacturer: LAZZARI Type JUNO 3200 Year of construction 2000 CE With scoring machine Saw blade can be swivelled up to 45° Motor power 5.5 kW Speeds 2,800 and 4,000 rpm. Carriage length 3.20 m Weight approx. 750 kg Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shi ...

Specifications: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vice 205 mm - Cutting range - with saw blade diameter 350 mm - at 90° approx. 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° approx. 100 mm - flat 100 x 100 mm - Mitre adjustable - Left up to 45° - Right up to 30° - Saw blade speeds 17 + 34 1/min - Drive 400 V / 2 / 2.6 kW - Coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Specifications: - Saw blade diameter up to max. 325 mm - Mitre adjustable left + right up to 30 ° - Cutting range at 90° round + square 100 mm - Rectangle 165 x 85 mm - at 45° round + square 100 mm - at 30° round + square 80 mm - Cutting speeds 22 + 44 m/min - Micro spray coolant device - Pneumatic connection 6 bar - Drive 400 V / 3.0 kW - Space requirement approx. W 1000 x H 1900 x D 1200 mm - Weight approx. 380 kg

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° approx. 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds + 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. infinitely variable - Hydr . Metal tension - Coolant device - Feed – discharge roller conveyor each approx. 3000 mm - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

Key data: 300 mm

From a company liquidation Specifications: Eisele VMS 300 Saw blade diameter 300mm Mitre cuts up to 60° right---left 30° possible Right stop + roller block Cutting Areas 90° 120x75mm---45° 80x75mm Round 90mm Saw blade speeds 40/80 m/min Coolant pump Rbeld 380 volts

Key data: 45 °, 3200 mm, 1300 mm

Saw blade swivel: 45 °, carriage length: 3200 mm, cutting width: 1300 mm, motor power: 5.5 kW, saw blade diameter: 450 mm, machine weight, approx. 1000 kg, scoring unit, motor brake, eletr. Dissimulation.

Description: Machine number 0746 , Table dimensions approx. 440 x 200 mm , saw blade diameter: 300 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 1,800 mm, turning speed range: 2000 / 4000 rpm

Description: Table approx. 670 x 500 mm saw blade diameter: 250 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 950 x 700 x 1,000 mm

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

Description: Saw blade diameter: 275 mm Cutting diameter: 90 mm Stroke: 120 mm Mitre cuts (on both sides): 90 - 30 ° Speed range: 40 / 80 rpm Operating voltage: 380 V Total power requirement: 1.4 kW weight approx.: 290 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,300 mm

Description: Saw blade diameter: 275 mm Cutting area (flat): 140 x 70 mm Cutting area (miter): 100 x 70 mm weight approx.: 268 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,500 mm

Description: Saw blade diameter: 400 mm Cutting range (round): 130 mm Cutting range (square): 120 mm Cutting area (flat): 315 x 40 mm U-profiles: 240 x 85 mm U-profiles: 45° 180 x 70 mm Cutting speed: 13 / 25 m/min Saw blade feed speed: 10 - 1200 mm Rapid return of the saw blade: 1500 mm/min Drive power: 3.2 / 4.1 kW Including: NC control, automatic feed weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,000 x 1,300 mm

Sliding Table Saw Sizing Saw Make Altendorf Type: F 90 Machine No. 73-4-144 Year of construction: 1973 Sliding carriage length 3000 mm Motor power 5.5 kW Extraction hood from above With scoring machine Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge, without scoring 500 mm Maximum cutting height 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm 4 speeds adjustable via straps Suction connection diameter approx. 80 mm and 120 mm Saw blade not swivel Weight with pallet 815 kg Dimensions 3000 mm x 3000 mm x H 1500 mm ...

Key data: 225 mm, 70 mm

Machine Type: Metal Circular Sawing Machine Manufacturer: WEIDMANN Model: EW 20 Condition: good Offer Type: Used Machine Specifications: Cutting area: Ø 70 mm Blade diameter: 225 mm Drive type: el./mech. Drive: 400 V 0.37 / 0.5 kW Remark: material stop, 2 spare sheets, 2 speeds Weight: 50 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Altendorf C90 Compact Sliding table saw Sliding table 1.6m Boom arm Upper Protective Hood Cutting width 800mm Motor 4kW 400V 50Hz

Circular sawing machine. unfortunately no technical data.

Planers - saws - milling machines - combination machines - accessories ! Price example : Basic 1600 Pro/ 400V. Format table 2600x270, saw blade slide. 315mm, max. cutting height: 100mm, 45° 80mm, new : 3400,- net.

Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,000 mm, weight approx.: 400 kg

Key data: 350 mm

Plate Saw for Iron Plates Saw blade dia. 350mm, stroke: approx. 500mm, mitre and swivel possible To be visited under electricity

Key data: 750 mm, 220 mm

Cutting area: dia. 220mm, U/I beam : 400 x 150 , feed rate: 0- 500mm/min , drive motor: 5hp, 1700kg, sgt. Condition.

Description: saw blade dimensions: 150 x 19 x 1,8 mm , table dimensions: 480 x 400 mm , weight approx.: 15 kg, Approx. Onsite Dimension. (l x w x h): 500 x 450 x 800 mm

Description: Serial number: 3603M03400 Nominal speed: 5000 rpm Nominal power: 1400 W Table dimensions: approx. 640 x 600 mm weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 500 mm

Description: Table dimensions: approx. 675 x 500 mm Speed range: 90 - 3000 rpm Mobile weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 750 x 1,100 mm

Description: Fabrication number: 243 Table dimensions: approx. 560 x 535 mm Stop: 0 - 400 mm Work table can be swiveled weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,100 mm

Description: Serial number: 0603331003 Nominal speed: 5200 rpm Blade diameter: 190 mm In case With operating instructions weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 410 x 290 x 320 mm

Description: Machine number: 99-58009 Power: 1.8 kW Saw blade diameter: 250 mm Suitable for mitre cuts Max. clamping width: approx. 90 mm weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 800 x 660 x 1,450 mm