circular saw cold used for sale

Mitre punch - angle cutting machine Manufacturer: Dan-List / Morso Model No.: EH Year of Make: 2008 Fully automatic, electric - pneumatic, 2-hand control Double mitre 45° Single mitre up to 90° Working width max. 100 mm Working height max. 180 mm Cross-section: 70 / 70 mm

Cross-Cut Saw MZ Project CS 1000 Optic Cutting width 1000mm Cutting height 100mm Saw size 550mm Electronic Raising and Lowering of the Pressure Beam Material Automatic material feeding Side discharge of cut material Introductory table length 320cm Receiving table length 255cm Width of rollers in tables 650mm Year of manufacture 1999 Operating pressure 6bar CE mark Machine dimensions 650x190x190cmH Net price

Panel saw manufactured in 2007. This Altendorf F 45 features a cutting length of 3000 mm, a main saw with a power of 5.5 KW, and a maximum main saw blade diameter of 500 mm. If you are looking to get high-quality cutting capabilities, consider the Altendorf F 45 panel saw we have for sale. Contact us for further details.

Vertical - Band Saw MÖSSNER SM 420 - Roll diameter 420 mm - Projection 410 mm - Workpiece height 265 mm - Saw blade length 3150–3260 mm - Saw band width max. 16 mm - Table size 600 x 600 mm - Working height 1000 mm - Total power requirement 1.1/1.7 kW - Incl. welding device - Incl. grinding device - incl. work light - incl. semi-hydraulic - Weight feed device - Incl. tilting work table - incl. operating instructions LxWxH 0.9x0.9x1.9 meters / Weight 500 kg

FORTE SBA 240 - Fully automatic band saw / 2x column-guided -Cutting diameter 250mm -Cutting speed 10-70 m/min -Multiple feed -Saw blade length 3660x27x0.9mm -Total power requirement 3 KW -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2x1.7x1.6 meters / Weight 1000Kg

A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx.  ...

Optimum 275 N Demonstration Machine Model: Opti S 275 N Technical data: Cutting range 0 degrees round: diameter 225 mm Cutting area 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees round : diameter 160 mm Cutting range 45 degrees: 160x160 mm / rectangle Cutting range 60 degrees round: diameter 100 mm Cutting range 60 degrees: 100x100 mm / rectangle Lifting the saw bracket: manual Feed: infinitely adjustable

cutting diameter: 420 mm saw band length: 5744 x 1,3 x 41 mm cutting width: 420 mm cutting speed: 15 - 110 m/min : 7,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,9 x 2,4 x 2,1 m Hydraulic band saw machine with - Material feed 1000mm - Motorized saw blade tension - Emergency stop device - Replacement saw bands The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details.

Panel sizing saw Schelling type FH6 330/330 Technical data: Main motor (kW): 27 Scoring Saw Length (mm): 3300 Saw width (mm): 2200 Panel thickness (mm): 40 All information is manufacturer's information

Panel saw manufactured in 2008. This HOLZMA HPP 350/43/38 features a saw blade projection of 80 mm and a cutting length of 4300 mm, providing efficient cutting capabilities. It includes a powerful main saw motor of 13.5 kW and a scoring saw motor of 2.2 kW. If you are looking to get high-quality panel cutting capabilities, consider the HOLZMA HPP 350/43/38 machine we have for sale. Contact us for further details.

Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades., Accessories:, Motorized rake angle adjustment,, Coolant system,, Automatic central lubrication,, Machine light,, 2 grinding wheel holders,, 1 sawblade mounting bolt., sheet thickness: up to 8 mm, Tooth pitch: 6 to 120 mm, rake angle: - 15° to + 25°, Tangential free angle: 0° to 6°, Radial free angle: - 4° to +6°, Connection value: ca. 1,1 kW (400 V / 50 Hz), Weight: about 1150 kg, Grinding wheel diameter: Max. 125 mm, Bore diameter: 32 mm, Dimensions L x W x H: 1340 x 1400 x 2000 mm, colour: green, Circular saw outer diameter: 80 to 460 mm

Band Saw Bizerba FK 23, completely in stainless steel, with brake, portioning stop, new scrapers and new saw blade, Connection 400V, year of construction 2008, dimensions LxWxH approx. 60x52x85cm, weight approx. 75kg, good used condition, works perfectly

cutting diameter: 420 mm saw band length: 4870 mm cutting width: 500 x 250 mm table height: 640 mm size of profile - max.: 400 x 400 mm cutting speed: 40 - 120 m/min saw band length: 4870 x 27 x 0,9 mm total power requirement: 3,0 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,0 x 1,0 x 1,5 m Manual band saw Hydraulic saw blade tensioning Hydraulic workpiece clamping Hydraulic saw frame lift/lower Includes 4 spare saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5300 mm, 2200 mm

vertical panel saw Cutting dimension max 5300 x 2200 x 80 mm Motorized evasive rear wall Funding Strip attack

Wood Band Saw manufactured in 2003. This WOOD-MIZER LT40 features a fully hydraulic system and is powered by a 3-year-old Kohler petrol engine with 1100 hours of use. The total operating hours are 4300, and the saw was fully serviced in 2026, ensuring it is fully functional. If you are looking to get high-quality sawing capabilities, consider the WOOD-MIZER LT40 machine we have for sale. Contact us for further details.

Panel saw Type: T65 Manufacturer: Otto Martin Year: 2017 Available: 10/2026 Min saw blade diameter: 250 mm Max saw blade diameter: 550 mm Parallel ruler cross section: 1350 mm Ruler with stop from the T70 model Table length: 3300 mm Speed: 2800-5000 rpm 2 axis pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: SCM Type of Machine: Sliding Table Saw / Circular Saw for Panel Sizing Model:Class SI 400 EP Year of Manufacture: 2019 Technical Specifications: - Maximum cutting height at 90 degrees: 140 mm (with 400 mm blade) - Maximum cutting height at 45 degrees: 97 mm (with 400 mm blade) - Main saw blade diameter: 400 mm - Scoring blade diameter: 120 mm - Saw blade tilt: 45 degrees - Main saw blade speed: 3,000 / 4,000 / 5,000 rpm - Scoring blade speed: 8,500 rpm - Main motor power: 7 kW / 9.5 HP - Scoring motor power: 1.3 kW / 1.7 HP - Sliding carriage dimensions: 3,200 x 320 mm - Parallel fence cutting width: 1,270 mm - Suction outlet diameter (blade guard): 120 mm - Suction outlet diameter (machine base): 100 mm Control System (EASY 3 UP PLUS CE Version): EASY2 electronic control with 7-inch 16:9 monitor; suspended, orientable control panel; programmed display and control of ...

Diehl straight line rip saw Model SL-52 wide arm 54" between saw blade and column glue line quality

roll diameter: 400 mm throat: 400 mm workpiece height: mm table-size: 610 x 500 mm saw band length: 2780 - 2980 mm turning speeds: 22 - 147 m/min total power requirement: kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,6 x 0,8 x 1,9 m Bandsaw with - Ideal welding unit - Grinding unit - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details.

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of angles between 45 and 90 degrees Digital Angle Displays Feed via 2-hand operation Roller conveyors and length stops on request Weight: approx. 1,000 kg

Technical data: - Saw blade dimensions up to 300 x 2.0 x 40 mm - 2 saw blade spindle speeds 40 + 80 1/min - Cutting range at 90° around 100 mm - flat 120 x 85 mm - Mitre adjustable on the left up to 45 ° - right up to 30 ° - Material vise - Drive 400 V / 1.0 / 1.2 kW - Space requirement approx. W 600 x H 800 x D 700 mm - Weight approx. 180 kg

Height=1.33 m, Overall length= 1.63 m, Overall width= 0.71 m, Net weight= 168 kg,

Key data: 380 mm

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the sawing unit with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

Manufacturer: Fom Type of machine: Sawing machine combined with a cutting line system MIRAGE 600 L Sawing Machine - Model: MIRAGE 600 L - Code: XZ-10825 - Year of manufacture: 2021 - Tool speed: 2880 rpm - Maximum tool diameter: 600 mm, hole 40 mm - Electrical features: 3-phase, 400V, 50Hz - Consumption: 10 kW, 550 NL per minute - Maximum weight: 850 kg LT 600 Cutting Line - Model: LT 600 - Year of manufacture: 2021 - Electrical features: 3-phase, 400V, 50Hz - Consumption: 11 KN, 550 NL per cycl Find more here - .ucymachines/ Contact us at - sales@ucymachines

A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.

UsedPaal RS40 residual roll saw / splitter and roll unwinders. Year of manufacture: 1998 Max. roll diameter 400 mm Max. roll length 2.500 mm Saw blade diameter 600 mm Drive power 19 kW Max. enclosure width approx. 1000 mm Max. machine length approx. 9000 mm Machine weight about 2,400 kg max. transport chain speed: 2.45 to 11.75 m/min. Throughput capacity depending on roll length and saw cut depth: 87.5 to 175 m/h

IRION Manual Pendulum Saw Adjustment 45° + / - 160 mm cutting thickness Suction connection Motor 7.5 KW Top condition! Immediately available from location

Manufacturer: Homag Model: HQP Type of machine: Crosscut saw with deep-cut saw Year of manufacture: 2011 Condition: Used, excellent condition, very well preserved and carefully maintained, ready for use Status: Disassembled and ready for immediate loading Cutting length: 1600 mm Program slide travel: 5600 mm Number of collets: 4 Maximum feed rate: 150 m/min Saw blade projection: 125 mm Main motor: 13.5 kW Scoring unit: Yes Storage sheet length: 10 m Storage sheet width: 5 m Accessories: Includes a small Bargstedt storage unit for conveniently placing worktops during transport Find more here - .ucymachines/ Contact us at - sales@ucymachines

Max. diameter of the cut material ... 300mm Control Siemens ... Simatic S7-1200 Machine weight ... 1420kg L x W x H ... 2600x2080x2140mm The machine is in good condition. if possible under power.

Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details.

cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 0 - 90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 230 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double-miter band saw - Variable speed control - Miter cuts up to 60° left and 45° right - Vise with quick-clamping mechanism - Blade tension monitoring - Automatic electric cooling system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information.

work piece width: 1.200 mm workpiece height: 500 mm bore diameter: 8 - 40 mm Number of drilling agregates: 3 Stk. spindle speed:: 150 - 1.100 U / min tool changer: 15 Stk saw blade diameter: 1.430 mm cutting speed: 8 - 30 m/min total power requirement: 43 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m Working Capacity Angle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mm Channel sections: 80 × 45 mm to 400 × 110 mm I-beams: 80 × 46 mm to 600 × 220 mm Wide flange beams (HE): 100 × 100 mm to 1,008 × 302 mm Special wide flange and welded T-beams: up to 1,200 × 500 mm Workpiece Data Max. workpiece width: 1,200 mm Max. workpiece height: 500 mm Drilling Unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 – 40 mm Spindle speed: 150 – 1,100 rpm Drilling feed: 0 – 500 mm/min Rapid approach: 3,850 mm/min Rapid return: 8,000 mm/mi ...

Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: 900 kg Rear feed width: mm Cutting length: 5300 mm Motor output: 4,6 kW Cutting height: 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 4.300 mm Cutting height: 1.800 mm Motor output: kW Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: ca. 600 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optimization saw Type: Opticut S 90 Manufacturer: Dimter Year: 2007 Hours: 582 Automatic miter saw Radial saw Reciprocating saw Cross-cut saw Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Year: 2006 - technically efficient, ready to work – after full service - motor: 3 kW - both cutting discs can be tilted +/- 45 degrees - cutting disc: 450 mm (vertical), 400 mm (horizontal) - cooling and lubrication system - compressed air preparation station - electronic angle indicator for two axes

Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Code: 0443 Brand: CMC - ITALY Model: SC 800 - CE Standard Band saw with covered wheel for cutting wood, carpentry, furniture, fixtures, plastics, aluminum, and other materials - CE Standard Technical specifications: Flywheel diameter 800 mm Working table size 710 x 1110 mm Cutting height 450 mm Blade length 5620 mm Motor 5,5 Hp Overall dimensions mm 1450 x 850 x 2400 h Weight kg 580

TECHNICAL DATA: Working length: min. 200 mm – max. 1500 mm Working width: min. 30 mm – max. 110 mm Working thickness: min. 10 mm – max. 60 mm Saw blade: max. Ø 400 mm Sawing unit: 6 kW (2 x 3 kW) Installed power: 11 kW INCLUDED IN DELIVERY: 01 Waste conveyor belt

cutting diameter: 410 mm saw band length: 5800 x 41 x 1,3 mm table height: 750 mm capacity 90 degrees: flat: 700 x 410 mm capacity 45 degrees: round: 410 mm capacity 45 degrees: flat: 500 x 410 mm capacity 45 degrees: round: links 410 mm capacity 45 degrees: flat: links 430 x 410 mm capacity 30 degrees: round: 320 capacity 30 degrees: flat: 320 x 410 : 15 - 150 m/min workpiece weight: max. 250 kg/m kg : 5,5 kW : 3200 kg : 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages Teleservice for remote maintenance Setting sawing programs in the AV Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering  ...

TECHNICAL DATA: Work table: 800 x 1180 mm Flywheels: Ø 900 mm Installed power: 5.5 kW TECHNICAL DATA SPLITTING MACHINE: Roller: Ø 200 mm Roller height: 210 mm Max. distance between angle and saw blade: 300 mm Max. distance between roller and saw blade: 100 mm

Code: 0445 Brand: LANDONI - ITALY Model: AGM 1 - CE Standard Portable electric sawig machine for heading and dividing of packed boards and logs - CE Standard This pack cutter is also suitable for the cutting of rolls of paper with the specific Widia chain, and for the cutting of plastic blocks or tubes Technical data: Straight-tooth chain DLC-type with pitch 1" Chain tensioner for automatic chain tensioning Guide bar lenght cm 240 Useful cutting cm 200 Electric motor Hp 12,5 three-phase Automatic oiling of the chain Overall dimensions: mm 1800 x 900 x 3000 h Dimensions for transport: mm 3900 x 900 x 1900 h Weight kg 300

A Schüco double miter saw for cutting aluminum and light metal profiles is available. Working length: 6000mm, saw units: 2, max. profile cross section X/Y: 150mm/100mm, min. cutting length: 400mm, speed: 2800rpm, cutting angle range: 45°-90°, saw blade diameter: 400mm. Documentation available. An on site inspection is possible.

cutting diameter: 300 mm saw band length: 3660 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: round: 290 mm capacity 45 degrees: flat: 260 x 280 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: flat: 180 x 170 mm coolant capacity: ca. 100 l Control: SPS total power requirement: 2.4 kW AC weight: 904 kg range L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in  ...

Key data: 500 mm, 180 mm

Under-table cross-cut saw Cutting width approx. 500 mm Cutting height approx. 120 mm Cross-cut movement from below, continuous from front to back Capping is triggered by foot switch Motor approx. 3 kW Saw blade diameter 500 mm, saw blade HM-tipped Suction connection on the saw body at the back bottom Diam. 100 mm on each side roller conveyor 3000 mm long, roller length 500 mm, Roll diameter 80 mm, roll spacing from center to center 205 mm One roller conveyor with 2 sliding length stops External dimensions: L 6800 mm x W 950 mm x H 1300 mm

Key data: 1500 mm, 15050 mm

Description FRIGGI 2MF GANTRY 1500 x 2000 x 9000 Details Serial number 3610 Year of construction 2009 Cutting diameter 1,500 mm Saw blade length 15,050 mm Cutting width 2,000 mm Total power requirement 45 kW Cutting force rectangular profile 1,500 x 2,000 mm Cutting force round profile Ø 1,500 mm Portal stroke 9,600 mm Strap dimension 80 x 1.6 mm Belt speed 10 - 120 m/min. Dimensions approx. 3,862 x 2,110 mm incl. documentation