circular saw cold used for sale

saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 65 mm : 50 mm : 83 mm : 82 mm rest piece length: 40 mm : 6 mm dimensions of saw-blade: 250 x 2 x 1.7 x 32 mm speed: 50-200 m/min engine output: 7,5 kW : 200 mm/sec. work height max.: 845 mm dimensions: 2225x1950x1980 mm weight of the machine ca.: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: mm cutting diameter: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: flat: 200x100 mm capacity 90 degrees: round: 130 mm : 34/68 UpM total power requirement: 2,6 kW height of material-table: 900 mm dimensions of the machine ca.: 1335x865x2175 m weight of the machine ca.: 430 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm : 110 mm : 95 mm : 135x60 mm : 120 mm : 100 mm : 135x60 mm : 180 mm dimensions of saw-blade: 350x32x3,4 mm turning speeds: 1700/3400 U/min weight of the machine ca.: 600 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370x32x3 mm : 15-150 U/min vice: 190 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180x100 mm : 115 mm : 90 mm : 90x90 mm : 115 mm : 100 mm : 120x100 mm : 115 mm : 100 mm : 120x100 mm total power requirement: 5,5 kW weight: 615 kg Overall size: 1400x1400x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 - 315 mm cutting diameter: 80 - 102 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 1, 5 x 2 m No. 5230 Cold circular saw with additional gearbox for 4 speeds EISELE VMS II - S - PV ( Typ-Nr. 421 ) Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence) Weight approx. 400 kg Working range: Ø 80-102 /flat 160x75/82 Drive: 1,4/1,9 Feed - roller conveyor approx. 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 x 2,5 x 40 mm cutting diameter: Ø 95 / 12590 mm stroke: ca. 100 mm total power requirement: 1,6 / 2,1 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,7 0,6 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm cutting diameter: 120 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: flat: 95 x 100 mm turning speeds: 34 / 88 U/min total power requirement: 0,75/1,5 kW weight of the machine ca.: 340 kg. dimensions of the machine ca.: 0,7 x 1,0 x 1,85 m Features: - Coolant system - Replacement saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4700 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : 45 ° : 45 ° : rund 105 mm / quadratisch : rund 90 mm / quadratisch : rund 90 mm / quadratisch : 1,3 - 1,8 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split vice (clamps before and after the sawblade) Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 107500 € : 2031.75 € : 360 mm : Ø360 x 40 mm : 40 - 280 U/Min : rund: 20 - 100 mm, quadra : 60 mm : 10 - 9999 mm : 900 mm : 15 kW : 3400 mm : 2675 mm : 2750 mm : 3450 kg : 21,65 kW Mass production in continuous operation is done by BMDO 100 XS when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 100 mm. BMDO 100 XS is designed to be used with TCT circular saw blade in order to cut solid bars in high speedand excellent precise. It is also suitable for HSS blades to cut tubes. With the Standard 800mm stroke servo feeding and 6 meters automatic loader. BMDO 100 XS is perfect for large-scale production of solid bars. STANDARD ACCESSORIES: automtic loader 6 m motorized roller table 3 mMikrospray Coolant Hydraulic Vice Inverter Control Panel Saw Blade Brush Cover Switch Heavy Duty Gear ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 € : 98.43 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : rund 105 mm / quadratisch : rund 90 mm / quadratisch : 4.7 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8500 € : 164.05 € : 350 mm : 350x32x63 mm : 45 / 80 U/Min : 45 ° : 45 ° : rund 115 mm / quadratisch : rund 110 mm / quadratisch : rund 110 mm / quadratisch : 5.85 kW : 1100 mm : 1000 mm : 1400 mm : 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach KKS 450 U Metallkreissäge (2021) Hersteller: Kaltenbach Typ: KKS 450 U Baujahr: 2021 Zustand: gebraucht, sehr gut Spannen, Sägen, Rücklauf, Öffnen ? einfach per Knopfdruck Halbautomatische Gehrungskreissäge Arbeitsbereich 150 mm Sägeblatt Ø bis 450 mm Gehrungsverstellung 180° Einstellung der Schnitthöhe über Drucktaster Zwei Schnittgeschwindigkeiten Lieferumfang: ? Dokumentation ? 2m Zufuhrrollenbahn ? 2m Abfuhrrollenbahn mit digitalen Materialanschlag ? 2x Sägeblätter

saw blade diameter: 315 mm cutting diameter: 100 mm : mm cutting speed: 40 / 80 U/min total power requirement: 1,2 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,8 x 0,6 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm

Cold circular saw Make: Kaltenbach Type: KKS EG-H/M45NC Built in 1995 Semi-automatic cold circular saw Vertical saw with cut from below and rotating saw table -Saw blade Ø 400 mm -Hydraulically adjustable saw blade feed -Coolant pump for coolant flow -Pin and chip scraper -Adjustable workpiece stop for using the full working width -Rotary table for oblique and longitudinal cuts, rotation range 90° to each side Max. sawing capacity: Fl. 300x40 mm, or 120x120 mm Height: 1860 mm Width: 1070 mm Depth: 800 mm Weight: approx. 900 kg with infeed roller conveyor 6 m and with discharge roller conveyor 3 m with controlled measuring carriage (M45NC) programmable, automatic operation little used Technically good condition Visually good condition Machine is still in commercial use and can be viewed by appointment. Transport from the hall an ...

Additional technical specifications: • Material feed support length: approx. 1900 mm • Material discharge support length: approx. 5000 mm • Hydraulic clamping: available • for miter cuts

: gebraucht : 2023 : 6246 : prompt, Zwischenverkauf v : Italien : 2970 € : 1 : 300 mm : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 500 mm : 1050 mm : 990 mm : 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via ...

saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: - mm cutting diameter: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Eisele VMS 120 / Cold Circular Saw -Saw blade diameter: 275 mm -Saw blade speed: 40 / 80 rpm (2 stages, pole switchable) -Cutting speed: approx. 80 m/min -Drive motor: 380 V (three-phase current) - Power: 1.0 / 1.2 kW -Cutting range at 90° (round material): max. Ø 90 mm -Cutting range at 90° (square/rectangle): max. 75 × 75 mm -Cutting range at 45° mitre (rectangle): max. 75 × 75 mm -Coolant device -5x circular saw blades -Material stand Dimensions: LxWxH 0.7x0.6x1.5 meters / Weight 180Kg

10 machines in stock EISELE high-performance circular sawing machine VMS 350 das ORIGINAL - made in Weilheim/Germany Equipped to accommodate saw blades up to 350 mm in diameter. Min. / max. cutting range at: 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Rectangle (in mm) 8 x 8 / 170 x 100 8 X 8 / 120 x 100 Smaller cross-sections on request. With pole-switchable three-phase motor, 1.4/1.9 kW, including clamping device to the left and right of the saw blade, stationary base frame with built-in coolant device and chip drawer, material support height 900 mm. Sawing machine is designed for voltage mains 400 V / 50 Hz. (3LNPE400V/50Hz). Spare parts supply for 10 years. Standard version with 17/34 min-1 or 34/68 min-1 Standard version, models differ in the type of cooling

saw blade diameter: 315 x 2,5 x 32 mm cutting diameter: 100 mm cutting speed: 33/66 m/min height of material-table: 900 mm total power requirement: 1,8 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,05 x 0,50 x 1,80 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter 315 mm Cutting diameter 80 mm Speed 1450 rpm Table 450 x 400 mm Mitre 45°/45° Connection voltage 400 volts Total power requirement 1.2 kW Machine weight approx. 0.2 t Space requirement approx. 0.9 x 0.9 x 1.4 m Auction-ID: A7-51438-450

Manual cold circular saw with: - Machine base - Support rail 1500mm Saw blade diameter 275 mm Cutting range at 90 degrees: around 80 mm Cutting range at 90 degrees: square 70 mm Cutting range at 90 degrees: flat 100 x 60 mm Cutting range at 45 degrees: around 70 mm Cutting range at 45 degrees: square 60 mm Cutting range at 60 degrees: flat 80 x 50 mm Clamping range 110 mm Speed 45 / 90 rpm Total power requirement 0.5 kW Machine weight approx. 0.07 t Dimensions approx. 900 x 700 x 1600 m Condition: functional Auction-ID: A7-51438-483

Cold circular saw with: Saw blade diameter max. 350 mm Cutting range: round 110 mm Cutting range: square 100 mm 2 saw blade speeds Machine weight approx. 0.65 t Dimensions approx. 0.8 x 1.0 x 1.85 m Condition: untested (6) Auction-ID: A7-51438-531

Cold circular saw - machine light - coolant system Saw blade diameter 300 mm Cutting diameter 90 mm Speed 40/80 rpm Total power requirement 1.5 kW Machine weight approx. 350 kg Dimensions approx. 0.9 x 0.8 x 1.5 m Condition: functional Auction-ID: A7-51438-453

Semi-automatic long-cut cold circular saw: - with mitre adjustment left 50°, right 60° - digital cutting angle display - feed speed hydraulically controllable - hydraulic workpiece clamping - 4 pcs replacement saw blades saw blade diameter 510 mm cutting diameter 150 mm cutting range at 90 degrees: flat 450 x 150 mm cutting range at 90 degrees: square 150 mm speed 29 / 58 m/min.total power requirement 4.2 kW weight 1.55 t dimensions L-W-H 1.8 x 1.7 x 1.7 mm Condition: functional Auction-ID: A7-51438-460

Cold circular saw mitre 45 degrees on one side Saw blade diameter 300 mm Cutting diameter 100 mm Saw blade speeds 40 / 80 rpm Cutting range at 90 degrees: square 90 mm Cutting range at 90 degrees: around 100 mm Total power requirement 1.5 kW Machine weight approx. 0.4 t Condition: functional Auction-ID: A7-51438-608

The assembly saw with elaborate standard equipment and a large cutting range · For mitre cuts on the left up to 45 °· For sawing steel, stainless steel and, to a limited extent, aluminium profiles · Automatic cooling directly on the saw blade · Safety switch 24 V in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool incl. saw blade HSS 250x2.0x32mm, 128 Z/ZT 6 +NL Optional: Machine base type 20505 (125,-EUR) Saw blade diameter 250 mm Cutting range at 90 degrees: around 85 mm Cutting range at 90 degrees: square 75 mm Cutting range at 90 degrees: flat 100x65 mm Cutting area at 45 degrees: around 80 mm Cutting range at 45 degrees: square 75 mm Cutting range at 60 degrees: flat 90x60 mm Total power requirement 0.8 kW Machine weight approx. 0.04 t Condition: never used / new (5) Auction-ID: A7-51438-555

Saw blade diameter 315 mm Cutting diameter 100 mm Cutting speed 40 / 80 rpm Total power requirement 1.2 kW Machine weight approx. 0.3 t Space requirement approx. 0.8 x 0.6 x 1.65 m Condition: functional Auction-ID: A7-51438-406

saw blade diameter: 300 mm turning speeds: 17,5/35 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 15/30 U/min saw blade diameter: max. Ø 370 mm Vice opening: 180 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100x100 mm capacity 90 degrees: flat: 180x100 mm : 105 mm : 100x100 mm : 130x100 mm : 120 mm : 100x100 mm : 130x100 mm weight of the machine ca.: 400 kg dimensions of the machine ca.: 1100x900x1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

Only the cold circular saw with the 2m roller conveyor and the 2m stop including stand is up for auction. All other items to be seen in the picture are not part of the auction (control cabinet and others are not included!). Heavy, indestructible industrial cold circular saw of the quality brand Wahlen (Eschweiler), model S-WK II (steel version, built on the heavy WK III cast body). The machine is characterized by maximum freedom from vibration and torsional rigidity. The saw blade is guided from top to bottom by a solid hand lever (cross-cut principle). Thanks to the pole-switchable premium gear motor from EMOD and the integrated coolant device, it is perfect for locksmiths and metal construction for precise cutting of steel, stainless steel and profiles. Technical details & equipment: Manufacturer: Wahlen GmbH & Co. Model No.: S-WKII (Heavy Steel Cold Circular Saw Motor: EMOD pol ...

PICKLING LINES, TANDEM MILL, 18 ANNEALING FURNACES, TEMPER MILL, SLITTING LINES, SHOT BLAST MACHINE, STRIP WIDTH: 1000-1279 MM, ENTRY THICKNESS: 1.8 - 4.5 MM, EXIT THICKNESS: 0.7 MM

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

We offer the labeler after comprehensive overhaul and modernization (including cabinet). The machine is designed for bonding three paper labels on glass bottle. Implementation of fully stainless steel. Labeller is equipped with two stations: - adhesive label front, neck and back label. Scanning system and label transfer is based on the pallets, which select a label from a magazine, transfer it onto the gripper drum and then onto bottle. The machine is extremely stable and reliable. Support comes down to refill glue and charge labels into magazine. Capacity: max. 24 000 b/h. We provide 1 set of equipment designed for a customer bottle. Machine has full 12-month warranty.

Thank you for your interest in our used machines we can offer you as follows: Many thanks for your interest in our second-hand machinery, please find below our offer: Manufacturer / manufacturer: National Lab model / type: 1000-1 Proficool UKT recirculating cooler/chiller chiller temperature controller Details / different: laboratory chillers ProfiCool UKT 1000 1 / almost good as new! Extremely quiet laboratory chillers with maintenance-free, air-cooled chiller. Heat exchanger made of brass. Control Panel with electronic controls with digital display (LED) as well as separate a / output switches for pump and cooling. External casing made of stainless steel. Filler for filling of the cooling circuit. Hose connections (olives) with a 12 mm outer diameter.

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Automatic slicer Bizerba A 404, with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Automatic slicer Bizerba A 404 with base frame. The machine is immediately available and can be tested in Koblenz, Germany.

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

Make: CLIMAVENETA Type: WRAT/SL 0802 Power: 200 kW (100KW) Refrigerant: R407C Built: 2006 2 pcs. compressors Make: DWM Copeland Semi-Hermetic Type: D6SJ1-400X-AWM/D One circle is defective, others are OK. Price on request

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...