circular saw cold used for sale

Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details.

HOLZMA panel sizing saw HPP 82 with plates heavy-duty loading ex site for sale.

Amada model HFA 1000, built in 1999 Cutting capacity: approx. 1000 mm Square: 1100 x 1000 mm Belt drive: 11 kW Hydraulics 2.2 kW Coolant 0.25 kW Cleaning brush 0.20 kW Chip conveyor 0.20 kW Saw blade dimensions: Length 9,700 mm Width 80 mm Depth 1.6 mm Belt speed 15-80 m/min infinitely adjustable Table load 15,000 kg Accessories: electrically driven roller conveyor

Band Saw FORTE F320 -Cutting range 90 degrees / Round - 320mm -Cutting Area / Square - 300mm -Cutting area 45 degrees 220x200mm -Cutting speed 20-100 mm/min -Cutting pressure hydraulically adjustable -Material length stop -Motor 1.5 KW -Saw blade dimensions 3660x25x0.9mm -Roller conveyors -Various replacement saw blades Dimensions: LxWxH 2.2x1.2x1.6 meters / Weight 700Kg

TECHNICAL DATA: Saw blade: Ø 500 mm Installed power: 5.5 kW Accessories: 01 Infeed roller conveyor: 3000 mm (idle) 01 Discharge roller conveyor: 1600 mm (motorized)

Hacksaw RUCOCO RSR 500-4 -Saw diameter 500mm -Stroke rates 34-48-60-85 strokes /min -Mitre cutting device -Replacement saw blade 850x75mm -Machine feet -Roller conveyor Hjbkn Au Ssvc Dnxo Tsl -Coolant device -Documentation Dimensions: LxWxH 2.2x1.1x1.5 meters / Weight 2750Kg

Saw blade diameter: 450mm, Cutting height: 150mm, Bore: 30mm, Swivel: 45°, Cutting width: 1000mm, Machine dimensions X/Y/Z: approx. 3300mm/2000mm/1600mm, Weight: approx. 1200kg. An on-site inspection is possible.

KNUTH VB 510 Metal Band Saw, BJ 2018 Operating voltage:400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions:600x500 mm Incl. whetstone and sanding belt device Dimensions set-up:1150x700x2000 mm Weight:approx. 400 KG

A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible.

Band saw PANHANS BSB630 -used-swivelling table, saw blade guide APA top and bottom, cutting height adjustment via handwheel, operating pressure indicator---------- Technical data ----------roller diameter: 630 mm, cutting height max.: 320 mm, cutting width max.: 600 mm, table size: 680x780 mm, table inclination: 20 Â, belt length: 4,480 mm, motor: 2.2 kW, extraction nozzle: 2x100 mm, dimensions: L=1,200 W=800 H=2,150.

A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible.

TECHNICAL DATA: Table size: 980 x 750 mm Tilting table Flywheel size: Ø 800 mm Saw blade length: max. 5770 mm / min. 5680 mm Installed power: 4 kW

ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect

SICAR sliding table machine model SEGA 350, year 2025, CE standards: - 3200mm aluminum carriage - Useful cutting width on parallel guide 1250mm - blade D=350mm, motor KW 5.5 / HP 7.5 - scorer D=120mm, motor KW 0.75 / HP 1 - manual tilting of the blade unit - digital display of the blade group inclination - upper protection with built-in extractor hood Optional Installed: - motorized lifting of the blade unit - Digital reader on the parallel guide - n° 3 digital readers on the bars of the square guide

Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm

STROMAB pendulum saw model PS50/F with: – blade diameter 500mm – useful cutting height 145mm – useful cutting length 530mm – motor kw 5.5 / hp 7.5, volt 380 – with 2+2 m roller benches Year 1996, to CE regulations

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg

Panel saw manufactured in 2005. This SCHELLING FM-H 430 features a feed speed of up to 25 m/min and a saw feed speed of up to 120 m/min. It is equipped with a powerful saw motor of 19 kW and a clamp opening of 113 mm. If you are looking to get high-quality cutting capabilities, consider the SCHELLING FM-H 430 panel saw we have for sale. Contact us for further details.

 Wood Her CUT 6120 heavy-duty precision high-performance panel sizing line Cutting length 3900 mm Cutting depth 3100 mm Saw blade protrusion 82 mm Control CUTCONTROL 2, 17" TFT screen – touch Powerful optimization software CD CUTTING SYSTEM Label Printers 3 air cushion tables 1800 x 600 mm Car. Angle pressure device up to max. 1300 mm Car. Cutting Setup Residual cutting device Cable remote control pneum. Trimming stops Main saw unit 11 kW, saw blade DM 350 mm Scoring Saw Unit 2.2 kW, Saw Blade DM 180 mm Saw carriage feed 0 - 100 m/min infinitely variable Saw carriage return 130 m/min Width stop feed 0 - 100 m/min (EU 0-25 m/min) Width stop feed - return 100 m/min Collets width stop 7 pcs. Compressed air connection capacity 6 bar Extraction connection basic machine 1 x 120 mm Suction connection pressure beam 3 x 120 mm Extraction capacity 3500 m³h Air speed 30 ...

Panel saw manufactured in 1994. This PANHANS 693 / EURO 30 features a cutting length of 5800 mm and a cutting width of 5150 mm. It includes a rear support table and multiple support beams for enhanced stability. If you are looking to get high-quality cutting capabilities, consider the PANHANS 693 / EURO 30 machine we have for sale. Contact us for further details.

Panel saw manufactured in 2001. This PANHANS EURO 32 features a cutting length of 5800 mm, a cutting width of 2x2200 mm, and a maximum cutting height of 100 mm. It includes a hydraulic lifting table with roller conveyor and an automatic angle cutting device. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS EURO 32 machine we have for sale. Contact us for further details.

Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.

Key data: 5300 mm, 2200 mm

Panel Saw Holz-Her Type 1211 Machine No. 579-FD82 Cutting length maximum 5300 mm Cutting height maximum 2200 mm Cutting depth maximum 80 mm Motor power 3/4 kW Saw blade diameter 300 mm Swivelling sawing unit Slatted frame automatically evasive Free-standing installation possible Saw frame can be divided in height for transport Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm

Panel saw Type: Concept 350 Manufacturer: Fimal Year: 2019 Main blade 350 mm Pre-cutting unit Massive formatting table Precise parallel ruler Strong and stable operation 400 V / 3 phases 20 pcs of discs included Machine in good condition, under power Find more here - / Contact us at -

OMS SALVARANI double miter saw model OK 350 SUPER: - useful opening 3200mm - adjustable blades D=350mm - Total power kw 8.3 , volt 380 - year 1995, machine to CE standards

A Neva lamella saw with a saw frame movement methodology is available. Frame stroke: 210mm, stroke rate: 450/min, max. cutting height: 350mm, max. working width: 155mm, max. lamella length: 155mm, min. lamella thickness: 1.5mm, rollers bottom/top: 11/4, production capacity per 8h: approx. 550m²-800m², max. feed speed: 2m/min. Machine dimensions X/Y/Z: approx. 2600mm/800mm/2000mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Band saw HOLZKRAFT Techno Max S45 N -used-swivelling table, saw blade guide top, saw blade guide bottom, cutting height adjustment via handwheel, operating pressure indicator---------- Technical data ----------Roller diameter: 450 mm, cutting height max.: 305 mm, cutting width max.: 435 mm, table size: 600x520 mm, belt length: 3,724 mm, motor: 2.2 kW, suction nozzle: 120 mm, weight: 165 kg, dimensions: 1,850x800x830 mmQuality info: - Belt run / imbalance checked- Bandages checked -

SCM M3 multi-blade saw with: - 300mm track in good condition - main motor HP 35, volt 380 - Useful cutting width 300mm - Useful cutting height 120mm - Blade diameters from 200 to 350 mm - Variable feed speed from 6 to 48 m/min - 1.5 HP feed motor - with laser for cutting line visualization

Mayer FH2-3120 veneer saw, fine-cutting saw with joining unit (planing unit) and veneer stop table Robust mechanical engineering from Mayer A video of the running machine can be sent on request. For tear-free and joint-tight cutting of veneer, including heavy-cut veneer Cutting length max. 3100mm The sawing unit and joining unit are combined in one unit, so that only one unit has to be moved. Easy to guide sawing unit, runs on linear guides. Rear storage table with penetrating finger stop, adjustable from approx. 2 - 62cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Drive motor saw 1.8kW, milling 1.0kW The motors can be switched on practically on the handle, so they only run when they are needed. HM-tipped fine-cut blade, sharpened Plough head Z4, equipped with new carbide indexable inserts Practical front veneer shelf, pull-out for pla ...

- Cleaning and screening facility designed for the treatment of sawdust with separation of metals, plastics and aggregates. - Capacity approx. 750 kg/h. - Includes: • Elevator belt at the entrance to the tower. • PAL vibrating screen for initial particle size separation of sawdust. • PAL densimetric separator that performs density separation between woody material and light contaminants (plastics, papers, films, foams, etc.). • PAL RC 600.2 refiner: engine power 45 kW. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-5

Band saw HOLZKRAFT HBS 433- Exhibition machine - saw blade guide at the top, saw blade guide at the bottom, quick-clamping device via eccentric lever---------- Technical data ----------rollers Ã: 430 mm, max. cutting height: 270 mm, max. cutting width with stop: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, table size: 610 x 431 mm, table inclination: -10 - +45 Â, motor 400 V: 1.5 kW, suction nozzle Ã: 2 x 120 mm, Cutting speed: 900 / 450 m/min., Dimensions (LxWxH): 768 x 512 x 2,048 mm,

Sliding table saw HOLZKRAFT sc 3c 26- Swivel display machine, rip fence with fine adjustment---------- Technical data ----------trimming length: 2,600 mm, max. cutting height 90Â: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, cutting width with rip fence: 900 mm, max. saw blade Ã: 315 mm, speed main saw blade: 4,000 rpm, motor power 400 V: 5.0 kW, suction nozzle Ã: 120 / 60 mm, work table height: 900 mm, table dimensions: 840 x 560 mm, dimensions of sliding slide: 270 x 124 x 2,600 mm,

Sliding table saw HOLZKRAFT sc 2c- Exhibition machine -swivel, rip fence with fine adjustment---------- Technical data ----------suction nozzle Ã: 120 / 60 mm, work table height: 900 mm, speeds: 4,000 rpm, max. saw blade Ã: 315 mm, cutting width with parallel fence: 900 mm, cutting height 90/45Â: 100 / 79 mm, cutting length: 1,600 mm, swivel range: 90 - 45 Â, dimensions (LxW): 1,020 x 325 mm, weight: 295 kg - new exhibition machine -

Bäuerle pull saw with support table left/right and stop. 400mm circular saw blade Cutting depth approx. 450mm Year of construction unknown 3KW

Key data: 500 mm

cut-off saw machine model BOTTENE TE 500 . second hand machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various diam. blade mm. 500 engine power 6.5 Hp max. cutting size mm. 500 x 135(H) total length of machine cm. 507 volt. 380/50

Multi-Blade Saw Paul K3 / 800 Working width 800 mm Cutting height 60 mm 1 saw shaft, saw blades are adjustable via extension rings Connected load 23.5 kW Technically good condition

This 3-axis BIESSE Selco WN 2 was manufactured in 2020. It features a robust machine weight of 3900 kg and operates on a power supply of 400 VAC with a consumption of 12 kW. The machine is designed for efficient panel cutting and includes a CE marking for compliance. If you are looking to get high-quality panel saw capabilities, consider the BIESSE Selco WN 2 machine we have for sale. Contact us for further details.

Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details.

Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips., Accessories:, Partial enclosure,, 1 sawblade holder,, Coolant system., Circular saw outer diameter: 260 to 2200 mm, Circular saw bore diameter: 25 to 220 mm, sawblade thickness: up to 20 mm, Tooth pitch: from 10 mm, rake angle: any, Radial free angle: up to 6°, Tangential free angle: up to 6°, Grinding path: up to 75 mm, Grinding speed: 0.5 to 6 mm(s), Working speed: up to about 10 teeth/min, Grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel peripheral speed: 26 m/s, Cooling lubricant pump capacity: 250 l/min, Coolant Tank Content: approx. 190 l, Connected load approx.: 6,5 kW (400 V / 50 Hz), Dimensions W x D x H =: 3050 x 1890 x 2050 mm, Weight approx.: 2160 kg, colour: green

Multi-Rip Saw Paul K4G 800 Working width 800 mm Cutting height 100 mm with 2 saw shafts with fixed attachment, saw blades are adjustable via rings (1 saw shaft in the machine, 1 saw shaft to replace) a 22 kW motor is installed, the original 44 kW motor is included was used to cut 60 mm thick planks Technically good condition

A glass cutting machine Lenhardt with a Tränker automation and control is available. Strip width: 777mm, strip length: 2366mm. Documentation available. An on-site inspection is possible.

A metal band saw is sold. Suitable for someone who has little space available. Dismantling and removal by buyers Pallet truck and a 1.6t forklift on site. Price is 2500 Euro net plus VAT Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Item location 90766 Fürth All information without guarantee

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

Rusk Saw Knife 3 pieces NEW!  Rusk Saw Knife Baker's Saw12 blade, with wide blade3 piecesNo. 1136-12-HRostfrei, total length about 44 cm see picture for details

Kullen Saw Knife No. 1135-12- E.W-H 3 pieces NEW!  Kullen saw blade, 12-blade, double-sharpWith serrated edgeEnglish styleWith saw3 piecesNo. 1135-12- E.W-HRostfrei, total length 44 cm see picture for details

Panel saw Type: K 740 S Manufacturer: Felder Year: 2023 Cutting length: 2500 -3700 mm Formatting sliding table "X-ROLL" Cutting width: 800 – 1250 mm Cutting height: 140 mm Control unit: "Power-Drive" Machine in very good condition, under power Find more here - / Contact us at -

Bread saws 3 pieces NEW!  Bread saws for cutting through fresh bread and mares3 piecesNo. 924-10Stainless steel, total length approx. 38 cm see picture for details

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and display Program control for automatic adjustment of the notch height, angles and notch height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm