134,834 used machines on RESALE, but how to find them? Machine Search
Cutting capacity: round material 90°: 260mm, flat material 90°: 300mm/260mm, round material -45° to 45°: 200mm, round material 60°: 165mm, saw band dimensions X/Y/Z: 2910mm/27mm/0.9mm, cutting speed: 110m/min. Machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto CompactControl, operating hours: approx. 200h. The machine control has been renewed. Documentation available. An on-site inspection is possible.
Key data: 4300 mm
Angle system for panel splitting with a cutting length of 4300 mm and 2200 mm the system also has 2 lifting stations at the exit and a scrap wood divider cutter
Key data: 1060 mm
Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...
Max. diameter of the cut material ... 200mm Main engine power... 2.2kW Machine weight ... 170kg
Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg
cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 400 mm
What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.
Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs
Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg
Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x ...
Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg
Key data: 500 mm, 45 °
The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.
Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand
Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible.
Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod
cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 138 kg,
Height=0.33 m, Overall length= 0.24 m, Overall width= 0.7 m, Net weight= 20 kg,
Height=1.97 m, Overall length= 1.01 m, Overall width= 1.018 m, Net weight= 305 kg,
Height=1.85 m, Overall length= 0.96 m, Overall width= 0.94 m, Net weight= 210 kg,
Height=0.955 m, Overall length= 0.619 m, Overall width= 0.519 m, Net weight= 76 kg,
Height=1.62 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 136 kg,
Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades
cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 320 mm cutting capacity - flat: 320 x 300 /90° mm cutting capacity - round: 320 / 90° mm cutting capacity - square: 300 / 90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2,8 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2100 x 1300 x 850 mm Features: • Inverter for adjustable speed • hydraulic lifting of the saw arm • automatic stop after sawing operation • manual saw blade tension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 225 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 160 x 140 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 140 x 140 mm capacity 60 degrees: flat: 110 x 80 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: round: 90 mm vice: 245 mm turning speed range:: 46/92 m/min saw band length: 2450 x 27 x 0,9 mm total power requirement: 0,7 / 0,81 kW weight of the machine ca.: 265 kg dimensions of the machine ca.: mm Equipment: - compact / robust manual band saw - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band ten ...
cutting diameter: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 150 x 150 mm capacity 45 degrees: flat: 150 x 210 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: flat: 90 x 100 mm dimensions of saw-band: 2455 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: ca. 900 mm total power requirement: 1,2 kW weight: 240 kg range L-W-H: 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating i ...
cutting diameter: 225 mm saw band length: 2480 mm table height: 910 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 160 x 160 mm capacity 60 degrees: round: 100 mm capacity 60 degrees: square: 100 x 100 mm turning speed range:: 45/90 m/min dimensions of saw-band: 2480x27x0,9 mm total power requirement: 1,5 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950 x 27 x 0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - ...
capacity 90 degrees: round: 100 mm capacity 45 degrees: round: 65,0 mm capacity 90 degrees: flat: 100 x 150 mm capacity 45 degrees: flat: 60 x 100 mm dimensions of saw-band: 1470 x 13,0 x 0,65 mm volt: 230 V : 45,0 m/min weight: 26,0 kg range L-W-H: 700 x 320 x 420 mm scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 330 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: flat: 350 x 320 mm capacity 45 degrees: round: 320 mm capacity 45 degrees: square: 300 x 300 mm capacity 60 degrees: flat: 230 x 310 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: round: 200 mm turning speed range:: 15 - 100 m/min dimensions of saw-band: 4640 x 34 x 1,1 mm engine output: 4,0 kW Control: weight: 1190 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including ...
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min saw band length: 3650 x 27 x 0,9 mm weight of the machine ca.: 640 kg Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension ...
cutting diameter: 230 mm capacity 90 degrees: flat: 230 x 230 mm capacity 90 degrees: square: 230 x 230 mm vice: 235 mm turning speed range:: 15 - 100 m/min dimensions of saw-band: 2950 x 27 x 0.9 mm Control: MEP CNC total power requirement: 3.18 kW weight of the machine ca.: 1175 kg dimensions of the machine ca.: 1980 x 1105 mm Automatic two-column band saw with a footprint of only 2.5 square meters Highest performance in the smallest space Features : - powerful CNC automatic band saw in two-column design for cuts at 0° - with Windows-CE based touch screen control 5.0 - 180° tiltable control panel Up to 100 cutting programs, each with different quantities and lengths Minimizes programming time for frequently executed jobs - 2x operating modes (semi-automatic and automatic) enable efficient cutting under all conditions - Saw head feed via linear guides driven by hydraulic cyli ...
cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 90 degrees: square: 260 mm capacity 45 degrees: flat: 230 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 230 mm capacity 60 degrees: flat: 170 x 100 mm capacity 60 degrees: square: 155 mm capacity 60 degrees: round: 175 mm turning speed range:: 18 – 110 m/min dimensions of saw-band: 3.375 x 27 x 0,90 mm work height max.: 880 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 840 kg dimensions of the machine ca.: 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic cont ...
cutting diameter: 180 mm capacity 90 degrees: square: 180 x 180 mm capacity 90 degrees: flat: 200 x 150 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 125 x 110 mm capacity 60 degrees: flat: 70 x 70 mm capacity 60 degrees: square: 70 x 70 mm capacity 60 degrees: round: 70 mm turning speed range:: 40 / 80 m/min saw band length: 2.130 x 20 x 0,9 mm total power requirement: 0,75 kW weight of the machine ca.: 190 kg Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructi ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow loweri ...
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3650 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW Control: weight: 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - inclu ...
cutting diameter: 250 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 290 x 210 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 210 x 200 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: square: 130 x 130 mm capacity 60 degrees: flat: 140 x 130 mm dimensions of saw-band: 2965 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: 940 mm total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 290 kg. range L-W-H: 1250 x 1500 x 1700 mm Equipment: - compact / robust manual band saw (INDUSTRY) for sawing solid material and profiles - ball bearing support table for miter cuts left 60° to right 45° durable + easy miter adjustment - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manually adjustable qu ...
roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - movi ...
cutting diameter: 120 mm capacity 90 degrees: flat: 120 x 102 mm capacity 90 degrees: square: 112 x 112 mm capacity 45 degrees: flat: 78 x 78 mm capacity 45 degrees: round: 80.0 mm capacity 60 degrees: flat: 50 x 43 mm capacity 60 degrees: round: 50.0 mm cutting speed: 35 - 80 m/min saw band length: 1440 x 13.0 x 0.65 mm voltage: 230 V engine output: 1300 Watt weight: 18.0 kg range L-W-H: 520 x 400 x 900 mm Portable metal band saw for cuts between 0° and 60° Dry cutting (no coolant) Up to 60% faster cutting compared to a conventional band saw thanks to the NG system with opposite direction of rotation of the saw blade. - Dry cutting (no coolant) - Innovative, coupled band tensioner . for checking and setting the correct band tension - Steel vice with prism-shaped guide - Powerful 1300 W motor - Constant Speed setting with current limitation - Stable, robust frame made of sectional stee ...
SPECIFICATIONS: Work table: 960 x 1100 Flywheels: Ø 1100 mm Saw blade width: 120 mm Electrically adjustable saw blade guide Installed power: 22 kW EQUIPMENT: 1 cutting band saw Spare blade TECHNICAL DATA Cutting Band Saw: Roller: Ø 400 mm Roller height: 270 mm Max. opening - saw blade: 200 mm Maximum opening roller saw blade: 400 mm
cutting diameter: 320 mm saw band length: 6300 mm cutting range: 420 x 320 mm control: Siemens Simatic HMI cutting speed: 20 - 130 m/min height of material-table: 950 mm total power requirement: 15 kW weight of the machine ca.: 2920 kg dimensions of the machine ca.: 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Band Saw Machine Metallkraft BMBS 300x 320 CNC BJ 2022
cutting diameter: 250 mm saw band length: 3660 mm cutting width: 1,3 mm clamping range: Länge 450 mm clamping range: Höhe 250 mm cutting speed: 20 - 70 m/min cutting capacity: stufenlos mitter cutting - all-position: 45 ° voltage: 380 V frequency: 50 Hz power capacity: 0,55 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,0 x 1,6 m coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request
Key data: 280 mm
Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...
Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.
Key data: 670 mm
Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg
maximum number of results exceeded
please refine your search
