137,879 used machines on RESALE, but how to find them? Machine Search
miter adjustable; fold-down protective cover; rear stop; auger material pressure aid; Auction-ID: A1-44050-106
Includes laser, including hand-miter saw. Auction-ID: A1-50090-177
Industrial metal saw on frame, with robust construction, designed for cutting profiles, tubes, bars and other metal parts. Equipped with a circular disc cutting head, a clamping vise to hold the workpiece during cutting and several manual controls for adjustment and positioning. The cutting head is lowered using a large lever, providing good control during work. Professional machine with heavy construction, particularly suitable for metalwork, maintenance, manufacturing and mechanical workshops. Shows visible signs of use and age. Nameplate no longer available. Auction-ID: A3-46129-37203
With table 455x455x940mm Auction-ID: A1-49889-261
This is the "Comfort" version that has a 2m long sliding table and outrigger that can handle 8x4 sheet material. Connects to 16A (blue plug) 240V single phase supply. Clean used condition showing normal signs of workshop use, all functions fully working. Used in a home workshop only by one person so has been looked after. The spindle moulder has been used once only. Comes with the following; 1. Spanners and allen keys as original supply. 2. Hammer boxed set of spindle moulder tooling 3. Hammer heavy duty clamp for work holding on the sliding table. 4. 8 saw blades of various tooth counts. Hammer and Bosch brand. One blade has carbide tip damage but you might want to get it repaired, the others will benefit from sharpening. 5. used planer knives that may have some life left in them, I was going to try honing them. 6. Printed Manual 7. Digital readout for the thicknes ...
Unaudited Auction-ID: A1-50540-219
Sawblade tiltable: 45 ° Length of the rolling table: 2500 mm cutting width: 1250 mm Motor output: 4,0 kW Cutting height: 90 mm Cutting height at 45°: mm Saw blade diameter: mm Speed: 4000 / 6000 U/min. weight of the machine ca.: 650 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Circular tester for crankshafts, camshafts, rotor shafts, etc. Reworked. Tip width 440 mm Peak height 200 mm Bed re-ground. Device repainted Dimensions: LxWxH 1000x600x1100 mm Weight approx. 300 Kg Colour: Light grey
10 piece blade 80 x 40 x 1 mm (or 70 x 40 x 1) mm for belt cutting machine. NEW. Larger quantities available!
Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
High-quality, PLC-controlled circular shears / circular, blank and flange ring shears with punching device used - refurbished PLC – Control for 120 cutting programs with 30 program sets each Projection in tailstock 1,000 mm Automatic tailstock clamping Outreach in the shear station 400 mm Shear performance 0.5 to 5 mm sheet steel 400 N/mm² 0.5 to 3 mm stainless steel sheet 650 N/mm² Largest shearable disc diameter Ø 1,400 mm for rectangular starting material Ø 1,800 mm for octagonal starting material Smallest shear diameter 150 mm Diameter Ø shear knife 100 mm Shear rate up to 35 m/min punching diameter at S = 2 mm sheet steel 400 N/mm² - Ø 25 mm at S = 3 mm sheet steel 400 N/mm² - Ø 17 mm Drive power 7 KW Weight 1.300 kg Dimensions 2.7 x 1.8 m x H 1.7 m Optionally available with a flanging device – Maximum board height 20 mm Large ...
We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg
PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine
table diameter: 400 mm workpiece weight: 315 kg table height: 360 mm max. height (90° position): 635 mm height of the swivelling axis: 240 mm distance table center - swivel center: 485 mm center bore: 40 mm rotation movement: 360 ° reading accuracy of turning index: +/-4 ° swivel movement: 90 ° power capacity: kW weight of the machine ca.: 0,31 t dimensions: 850x450x360 mm • new-valued, manual operated, swivelling rotary indexing table, • H4 = indicating system for circular movements 0 - 360 ø +/- 4 above optic, • S20 = indicating system for swivelling movements 0 - 90 ø +/- 20 above scale ring, • B = manual operation for 0 - 360 ø, • B = manual operation for 0 - 90 ø, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC ...
Replacement blades for cutting machines, circular blades, round cutting blades, machine blades, -Blade size: 350x40x3 -Serial number: 2162928 -Material: 4112-22N Martensitic stainless steel -Number: 6x available -Price: per piece -Dimensions: 350/40/3 mm
Circular knives, circular cutting knives, machine knives, replacement knives for cutting machines -Circular blade: Replacement blades for cutting machines -Blade size: 400x30x3 Serial number: 207484 -Number: 3 knives available Price: per piece -Weight: 2.9 kg/pc.
TIMAC TZZ-1604 circular disc shear/cutter with automatic double station stacker. Year 2018 Reviewed, ready for production. Automatic circular cutter for disc production from coil or strip, equipped with a double station automatic stacker that allows continuous work without stops. Especially suitable for the manufacture of bottoms and lids, circular pieces and blanks for drawing or stamping processes. Key features -Circular cutting using adjustable blades -Diameter adjustment system for different disc formats -Automatic double station stacker -Suction cup arm for collecting each disc -Possibility to remove entire stacks without stopping production -Doors with latches and safety interlocks -Integrated electrical and pneumatic system -Independent electrical panel -PLC control -Safety in accordance with CE regulations Main technical data -Sheet thickness: -Up to 3mm (car ...
One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible.
for round diameters 70 - 1500 mm Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working width: 1000 mm Sheet thickness steel: 1.5 mm Machine weight: 150 kg Dimensions/: 1200 x 800 x 1200 mm Colour: blue Projection: 350 mm Machine number: 4447
Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible.
Guided tour with a trolley DRECKSHAGE TAG-16-S 1 Trolley: 84 x 53 mm Guided tour: Ø 16 x 250 mm used, tested ! Dimensions: 250 x 465 x 42 mm
Circular Divide Table, Round Table, Rotary Table RECORD Ø 300 mm Table height: 122 mm Groove width: 16 / 27 mm used, tested ! Dimensions: 500 x 470 x 160 mm
Circular dividing table W M W manually and electrically adjustable with 3-jaw chuck 250 mm rotary table Ø 500 mm clamping grooves 6 x 14 mm used, tested ! Dimensions: 500 x 650 x 300 mm
Rotary Table, Round Sectioning Table, Circular Dividing Table PAGUS Ø 250 mm Table Height: 115 mm Groove Width: 12 / 20 mm < br /> groove depth: 22 mm centering hole in the table: Ø 23 mm A drive shaft with spline shaft profile: Ø 13 / 17 mm, 4 wedges, wedge width: 4 mm used, checked! Dimensions: 500 x 450 x 155 mm
Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch
Motor-driven circular shears FASTI type 502 - 10 - 2Masch. No. 9252 009 Year of construction 1992Material thickness max. 2 mm (400N/mm²)Maximum blank diameter 1000 mmMinimum blank diameter 100 mmCutting shaft speed 60 and 120 rpmCutting speed 12 and 24 m/min. Knife holder 20 mmKnife diameter 65 mmProjection of the clamping plate 720 mmProjection of the cutting wheel 280 mmMotor power 1.1 / 1.4 kWWeergized connection 380 volts, 50 Hz- 2 motor speeds- mechanical clamping tip-
A centerless cylindrical grinding machine König & Bauer (Koebau) is available. Grinding wheel width: 300mm, max. grinding diameter: 200mm, grinding wheel bore: 305mm. Control wheel width: 300mm, control wheel bore: 127mm, speed: 85rpm, max. workpiece length (plunge grinding): 300mm. Machine dimensions X/Y/Z: approx. 3150mm/2100mm/1850mm, weight: approx. 6000kg. On-site inspection is possible.
A Junker CNC cylindrical grinding machine overhauled in 2019 is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, orbital diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions X/Y/Z: approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control: Siemens Sinumerik. Including BKW chiller, Knoll VL 1000/4000 cooling lubricant system with 6500l container and Hyfra industrial recooler. Documentation available. On-site inspection is possible.
Stock number: D1214, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: On a leg console, Tabletop diameter: Ø 1000 mm, Tabletop material: Laminate, Total height: H 950 mm, Manufacturer: King
Stock number: D1183, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: 4 pcs. adjustable legs, Tabletop diameter: Ø 1500 mm, Tabletop material: Nylon, Height: H 790 mm, Other: 4 pcs. stabilizer wheels
A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.
A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.
MOST MWOS-A5 tank welding machine was built in 2023 in Poland by RYWAL-RHC Sp. z o.o. This highly versatile machine is designed for fully automatic welding of industrial products, i.e. machine parts, pressure vessels and heat exchangers. Circumferential, angle and full-value longitudinal joints are performed by means of two reliable torches in the MIG/MAG method. This solution significantly increases production efficiency, while maintaining the repeatability of the process. All this is complemented by the advanced MCS-X control system with an intuitive interface, which enables the creation of entire production processes in just a few steps. The MOST MWOS-A5v02 circumferential welding machine weighs 3200 kg. Technical specifications of the MOST MWOS-A5 circumferential welding system - working length: 4500 mm - maximum workpiece diameter: 1500 mm - maximum workpiece weight: 5200 kg ...
cutting capacity: 2.0 mm throat: 700 / 280 mm round blank diameter max.: 1000 mm round blank diameter min.: 120 mm speed: 7.0 m/min total power requirement: 1.10 kW weight of the machine ca.: 360 kg range L-W-H: 1400 x 400 x 1150 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven circular shears with large projection - with hardened blades - machine base - manual setting of the desired round diameter - manual material clamping - electric motor brake - 1x freely movable foot switch including emergency stop button The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Process: centerless plunge grinding, max. workpiece diameter: 20mm, max. workpiece length: 80mm, without automation by vibratory bowl. An on-site inspection is possible.
Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.
Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted.
L x W: 4.000 x 1.600 mm. - With frame, electrical motor, cardan-shaft and springs
Size: 2.200 x 6.800 (5.750)mm - Year of Manufacture: 2002 - 2 Decks - Included: 18 kW Electrical motor, Cardan shaft and Springs.
Size: 1.800 x 4.000mm - Year of Manufacture: 1998 - With Electrical motor (11 kW/6), Cardan shaft and springs - Will be overhauled, sandblasted and painted.
OVERHAULED - Size: 1.400 x 3.000 mm - With Electrical motor, Cardan shaft and Spring elements.
OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.
Size: 1.400 x 2.400 mm - Included: Electrical Motor (4 kW / 1.060 RPM) and springs - Will be overhauled, sandblasted and painted.
maximum number of results exceeded
please refine your search
250 € 
