138,257 used machines on RESALE, but how to find them? Machine Search
Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: Cutting height: ~ 145 mm Cutting width: ~ 1,300 mm Cutting length: 3,300 mm Tilt angle: 45° Stop: Digital Adjustment: Electronic Rip fence: Manual Condition: Gebraucht Location: Tauberbischofsheim, Germany
saw blade diameter: min. 200 / max. 500 mm Speed: 2800 / 4000 / 5500 U/min. weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade diameter: 350 x 2,5 x 32 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 170 x 90 mm Motor output: 1,8 kW machine weight ab.: 500 kg dimensions: 1200 x 800 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350x32x2,5 mm : 15-90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 90x90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 3 kW weight: 685 kg Overall size: 2050x1100x1800 mm turning speeds: 15/90 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width: 375 mm Cutting height: 150 mm dimensions of saw-blade: 500 x 30 mm Motor output: 2 x 3 kW Cutting length: 5100 mm speeds: 2800 U/min air pressure: 6 bar weight of the machine ca.: 700 kg dimensions of the machine ca.: 6100 x 1450 x 1450 mm Profile support plate made of steel Stable cast construction of the saw unit Large cutting range, 2 profiles can be cut at the same time Easy adjustment of the moving unit with roller guides Double storage of the swivel device Safe clamping thanks to the two-pressure system Double saw feed guide Hydropneumatic saw feed External dimension correction scale Left saw unit fixed Swivel range 45°-90° Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 x Ø 30/40 mm cutting diameter: 135 mm cutting length: 430 mm dimensions of saw-blade: 350x3,0/2,4x40 mm turning speeds: 3800 U/min Dust suction hood: 100 mm total power requirement: 3,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 10 ...
saw blade diameter: 400 mm cutting diameter: 135 mm capacity 90 degrees: flat: 280 x 70 mm capacity 90 degrees: square: 120 x 120 mm capacity 45 degrees: flat: 210 x 55 mm capacity 45 degrees: square: 105 x 105 mm turning speeds: max. 3000 U/min saw-blade dia.: 400 x 3,2 x 40 mm motor: 400 Volt total power requirement: 4,0 kW weight: 650 kg range L-W-H: 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WOODSTER ist eine Kreissäge für Holz, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Es liegen keine Angaben zu Arbeitskapazitäten (Sägeblattdurchmesser, Schnitthöhen, Verfahrwege oder maximalen Werkstückdimensionen) vor. Ebenso fehlen detaillierte technische Daten wie Spindeldrehzahlen, Vorschubwerte, Stromversorgung, Abmessungen oder Gewicht. Die Maschine ist darauf ausgelegt, enge Toleranzen zu erreichen, und eignet sich für Tischlerei, Möbelproduktion, Holzverarbeitung und Bau Technische Daten ohne Gewähr
REMET TR 70 ist eine Kreissäge, die Präzision, hohe Genauigkeit und Zuverlässigkeit für industrielle Schneidaufgaben bietet. Konkrete Arbeitskapazitäten (Durchmesser, Module, Längen, Verfahrwege, Werkstückmaße) sind in den vorliegenden Informationen nicht angegeben. Genaue technische Daten (Spindeldrehzahlen, Vorschubraten, Stromversorgung, Abmessungen, Gewicht) liegen nicht vor. Entwickelt, um enge Toleranzen zu erreichen; geeignet für Branchen wie Automobil, Luftfahrt, Werkzeugmaschinen, Medizintechnik und Uhrenbau. Technische Daten ohne Gewähr
cutting width: 280 mm Cutting height: 150 mm Motor output: 2 x 4,0 kW saw blade: 420 x 30 mm Cutting length: 6000 mm speeds: 2800 U/min air pressure: 7 bar weight of the machine ca.: 1750 kg dimensions of the machine ca.: 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
automatic circular saw Type: CM 601 Manufacturer: Adige Year: 2014 Control: Siemens Hours: 14611 Pipe diameter range: 10–102 mm Square profile: up to 70 × 70 mm Aluminum profile: 90 × 90 mm Cut length: up to 800 mm Step feeder 6500 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Sawblade tiltable: 45 ° Length of the rolling table: 3200 mm cutting width: 1350 mm Motor output: 5,5 kW Cutting height: ca. 153 mm mm Saw blade diameter: 450 mm Speed: 3000/4000/5000/6000 U/min. weight of the machine ca.: ca. 1.000 kg : Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 5.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price
Machine number: 4818 Operating voltage: 400 V Frequency: 50 Hz Rated current: 1.5 A Grinding wheel diameter: approx. 250 mm Auction-ID: A7-49089-377
Behringer Eisele VMS 350 Vertikalkreissäge / Metallkreissäge Hersteller: Behringer Eisele Typ: VMS 350 Zustand: NEU Bearbeitungsquerschnitt max. rund bei 90° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 90° 170 x 100 mm Bearbeitungsquerschnitt max. rund bei 45° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 45° 120 x 100 mm Sägeblattdurchmesser 350 mm Sägeblattbreite 3 mm Bohrungsdurchmesser 40 mm Einstellbare Sägeblattdrehzahl 17 U/min / 34 U/min Maschinenoberteil schwenkbar 45-90-45-30° Motorleistung gesamt 1.4/1.9 kW Breite 900 mm Länge x Breite x Höhe 1050 x 900 x 1900 mm
Key data: 45 °, 2250 mm, 900 mm
400 V, 50 Hz, 5 Kw, 10 A, Sliding table 2250x270 mm, Boom table 950x600 mm, Cut-to-length stop 2650 mm, extendable, Cutting width 900 mm, Cutting height 90 mm, Saw blade 250-315 mm, Extraction connection 125 mm, Work table 1500x1000 mm, Weight 410 kg
Circular sawing machine. Raw bitsun, unfortunately no technical data.
Machine number: 3512105465 Operating voltage: 400 V Frequency: 50 Hz Connection: 1.8 kW Saw blade diameter: approx. 250 mm Reference: Zafa - Lot 20 Auction-ID: A7-49882-104
Sawblade tiltable: 0-46 ° Length of the rolling table: 3200 mm cutting width: 1000 mm Motor output: 5,5 kW Cutting height: 179 mm Cutting height at 45°: 123 mm Saw blade diameter: 500 mm Speed: 3/4/5000 U/min. weight of the machine ca.: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 45 °, 3700 mm, 1000 mm
Experience precision and quality with the Altendorf sliding table saw type F45, an indispensable tool for any woodworking. Equipped with a robust 5.5 kW motor, this high-quality device enables clean and efficient cuts in a wide variety of wood species. The machine is characterized by its space-saving requirement of only 23002900910 mm and is easy to position with a weight of around 1000 kg. Made in Germany in 1992, the circular sawmill stands for durability and reliability. Its country of origin and year of manufacture guarantee excellent workmanship and technology that is specially tailored to the requirements of woodworking. Ideal for craftsmen and professionals who value precise results and solid workmanship. Various accessories according to photo Test run possible, only collection, help with loading possible. Prepayment or cash on pick-up No Guarantee or Warranty
Sliding table saw Eima Type 120 Max. Cutting Width: 2068 mm Min. cutting width: 300 mm Maximum blade diameter 400 mm Cutting height ~100mm Motor power 2×4.4kw Electronic Cutting Width Eats Technical documentation and CE certificate Year of manufacture 1999
Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...
Saw blade 350 mm Guide stop 60 mm high Maximum cutting size 90 x 170 mm Fixed corner locks left and right 10-15-22.5-30-45 degrees All degrees can be adjusted separately from 46-90-46 degrees. With base and aluminum stop with two lugs adjustable up to 3500 mm. Base is made of wood and is 4700 mm wide x 750 mm deep and 970 high. With spare protective cover and a sawdust trap. Auction-ID: A1-48994-30
Digital adjustment and readout of the longitudinal conductor and digital adjustment and readout of the crosscut conductor slide. Aluminum saw carriage length 3400 mm. Maximum digital cutting width 1300 mm. Maximum digital cut-off size 2800 mm. With saw carriage lock for easy placement of larger plates and workpieces on the carriage. Digital readout of the height of the saw blade, and digital adjustment of the angle of the saw blade. Tipp-on variable servo drive control of the long saw carriage that can be controlled with a controllable joy-stick, it can also be used to regulate the speed of the saw carriage. With two vertical snaps for the saw trolley to press wood or plates. A plastic cover strip is not present on the digital crosscut guide. Equipped with an aluminum blade extension to the right of the saw of 93 cm and a length to the back of 135 cm. Blade extension behind the ...
2800 rpm, Saw blade 350 mm, Pull-out arm 620 mm, With lock for unintentional forward of the ball-bearing saw unit, wooden saw table of W= 4700 mm and D= 830 and H= 1000 mm including guide. With metal extraction tray behind the saw. Auction-ID: A1-48994-33
Saw unit adjustable 45-90-45 degrees. Auction-ID: A1-48994-41
Technical data Manufacturer: Altendorf Type: F 45 Machine No.: 90-3-121 Year of Make: 1990 Max. saw blade diameter: 350 mm Voltage: 380 V Main saw motor: 5.5 kW Scoring unit: available Saw blade speeds: 3,000 / 4,000 / 5,000 / 6,000 min⁻¹ (Source: Online research) Configuration Sliding table length: approx. 3,200 mm (source: online research) Cutting width: approx. 1,250 mm (Source: Online research) Max. cutting height: approx. 105 mm (Source: online research) Saw blade: swivels up to 45° (Source: online research) Suction: Extraction connection and extraction hood available. Note Some of the technical information has been supplemented on the basis of verified online sources and marked accordingly in each case. The information has been researched to the best of our knowledge and belief. No guarantee is assumed for completeness and accuracy. A viewin ...
Lg.Nr. 26301 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° to around 130 mm - Square 120 mm -flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° to around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade - Infinitely adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - hydr. Material vise with hand crank for fine adjustment - Infinitely adjustable clamping pressure - 2 pieces of hydraulic retainers - Micro spray coolant device - Original discharge - roller conveyor with dimension stop 4000 mm - Roller conveyor feeder 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg
Serial number: 10.002 PK Table size: 710 x 900 mm Saw blade diameter: max. 250 mm Saw blade bore: 20 mm Motor speed: 2800 rpm Saw shaft speed: 3800 rpm Cutting height at 90°: 82 mm Cutting height at 45°: 55 mm Motor power: 3.1 kW Voltage: 220/240 V Fuse: 16 A Reference: Wowi - Lot 52 Auction-ID: A7-49882-190
- Maximum saw blade diameter 500 mm. - Sliding table length approx. 3,400 mm. - Motor power 7.5 kW. - Cutting width 1,300 mm. - Angle stop, crosscut length up to 3,200 mm. - Miter stop, crosscut length up to 2,500 mm. - with flexible suction hose, without galvanized extraction ducts. Auction-ID: A1-49374-13
- Max cutting length: 3400mm. - Max cutting length: 3200mm. - Max cutting width: 1550mm. - Control panel not working. - with flexible suction hose, without galvanized extraction ducts. Auction-ID: A1-49374-12
Martin T72A sliding table saw Hydraulic saw tilting with digital display at eye-level Hydraulic saw elevation with digital display at eye-level NC-controlled parallel fence Cross-cut fence with 2-point stops Scoring saw Manufacturer: MARTIN Type: T72A Comfort M-Nr.: V403081 Year: 1999 Control panel: Eye-level integrated in dust extraction cover, LCD displays showing saw height, -saw tilting angle, width/parallel fence positioning; scoring saw positioning Saw blade elevation: Hydraulic footpedal elevation 0 – 170 mm – with LCD display Saw blade tilting: Hydraulic footpedal tilting 0 – 46° – with LCD display Parallel fence Positioning: Handwheel positioning (frontsidemachine) – digital reading on central control Dust cover top: Electrically controlled elevation Manual sideward positioning for large objects sawing Cross-cut table: Aluminium swivelling table suitable for mitre cut ...
Martin T71 sliding table saw Manufacturer: Martin Type: T71 M-Nr.: 1982 Year: V123342 Mainsaw: max. ø450 mm, max Sawheight: 170 mm, Saw tilting: 0° – 46° Scorer: No RPM: 2.800/4.000/5.500 tpm Motor: 5,5 KW Sliding table: 1.900 mm Width: 1.250 mm Cross cutfence: Length measuring fence 2.200 – 3.300 mm with 2 -point system Cross cut table: with fixed positions for most used angles Dustextraction: Top: ø80 mm, Bottom: ø140 mm Weight: 1.200 KG
Martin T17 with tilting saw Manufacturer: Martin Type: T17 M-Nr.: V070521 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Yes Main saw: kW Speed: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø450 Cutting Heigt: 147mm Blade Width: 0 – 45° Cutting Width: 1.050 mm Condition: Volledig functioneel
Rema DMMC sliding table saw Manufacturer: Rema Type: DMMC40 Year M. Nr: 1995 Main saw: max. max. ø400 mm, max Sawheight: 130 mm, Saw tilting: 0° – 45° Scorer: Yes RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.000 mm Parallel fence Positioning: 1.250 mm Cross cut fence: 2.200-3.300 mm 2-point fence Sidetable: with fixed positions for most used angles Dust extraction: Top: ø80 mm, Bottom: ø140 mm Weight: 900 KG
Martin T72A sliding table saw with electric saw elevation, -tilting, NC-controlled parallel fence, cross-cut fence with 2-point stops and mitre cross cut table Manufacturer: MARTIN Type: T72A M-Nr.: V238101 Year: 1997 Control panel: Eye-level integrated in dust extraction cover, electric saw elevation, -saw tilting, NC-controlled parallel fence positioning; Saw blade elevation: Electric controlled – digital reading on central control Saw blade tilting: Electric controlled – digital reading on central control Parallel fence Positioning: NC-controlled with digital reading on central display Sidetable: Mitre cross cut table, Cross cut fence: Aluminium: 2.200 mm, extendable upto 3.300 mm, with Digital 2-point stops Main saw: max. ø450 mm, bookthickness; 0-170 mm, tilting 0° – 46° RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.300 mm Parallel fence Positioning: 1.250 mm Du ...
Altendorf TKR45 Manufacturer: Altendorf Type: TKR45 Mach. Nr: 89-1-221 Year: 1989 saw length: 1350mm Sidetable: JA Saw width: 850mm saw height: 155mm Saw diameter (max): ø450 Saw spindle: ø30 Saw blade tilting: 0-45° Motor: 5,5 kW Speed: 3000/4000/5000 omw/m Weight: 910KG
SCM SI400 Vanguard sliding table saw, 3-ax Control, Swivelling cross-cut table Manufacturer: SCM Type: SI400 Vanguard M-Nr.: Year: 2004 Touchscreen: 12″full-colour touchscreen, start-stop function in sliding table Control: 3-ax control, with control panel at eye -level 999 programm positions, 6 cuts per programm, help function with graphics, collision control Sliding Table: 3.200mm Saw Blades: Ø 250 – 400 mm Main saw: 5,5 kW, 3.000-4.000-5.000 rpm Cutting Heigt: 130 mm (saw diam.. 400 mm-90°, 92 mm- 45°.) Tilting: 0 – 45° Scorer: ø120 mm, 2-ax control Motor: 0.75 KW, 8.500 rpm Cutting Width: 1.500 mm Rip fence: anodised aluminium Cross-cut table: Vanguard cross-cut table with swiveling -50° upto 50° Cross-cut fence: Aluminium 2 digital stops with angular length correction, max 3.2 m
SCM SI15 with tilting saw Manufacturer: SCM Type: SI15F Year: M-Nr.: AB20182 Table Size: 1150 x 800 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 5,5 kW RPM: 3200 – 4500 – 6000 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø350 Cutting Heigt: 115mm Blade tilting: 0 – 45° Cutting width: 850 mm Weight: 560KG
MARTIN T74 Radio Control – sliding table saw, with 4-ax CNC control; parallelogramtable as 5. ax integrated in central control, plus 3-ax Scoring Saw Manufacturer: MARTIN Type: T74 AUTOMATIC – Radio Control Year: 2008 M-Nr.: V484794 YouTube:
Martin T17 with tilting saw Manufacturer: Martin Type: T17 Year: 1972 M-Nr.: V95358 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 4 kW RPM: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm. Saw Blades: ø450 mm Cutting Heigt: 147mm Blade tilting: 0 – 45° Cutting width: 1.050 mm
Martin T60C-automatic panel saw Manufacturer: Martin Type: T60 Classic M-Nr.: V482223 Year: 2008 Martin T60C V482223:
MARTIN T74 Radio Control – sliding table saw, with 4-ax CNC control and 5. ax integrated and 3-ax Scoring Saw Aggregate Manufacturer: MARTIN Type: T74 AUTOMATIC met 3–as voorrits en parallelogram tafel Year: 2007 M-Nr.: V471539 YouTube: Touchscreen: 10.4″ touchsreen full colour, ate eye level, swivelling Table Size: 1.350 x 1.500 mm in grey cast iron; table extension 600400 with storage Table Heigt: 900mm Sliding Table: 3.300mm Main saw: 5.5 kW Saw Blade Arbor: Main saw blade arbor: 30 mm Ø; two 10 mm drive pins Saw Blade replace: ProLock” quick change system Saw Blades: Ø 250 – 500 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades Cutting Heigt: CNC-controlled max. 170 mm when Ø500 mm Blade tilting: CNC-controlled 0 – 46° Cutting Width: CNC-controlled, max. 1.350 mm; can be lowered under table level in i ...
Martin T75PreX (246° tilting) and RadioCompens (length compensation for angular cuts) Manufacturer: Martin Type: T75PreX Year: 2012 M-Nr.: V519664 Control: 10.4″ Touch-Screen at eye-level, turning-swivelling with blocknote holder 3-ax CNC-controlled plus 4th and 5th manual axes integrated in centra control system Table Size: 1.350 x 1.500 mm in grey cast iron; table extension as standard, Table Heigt: 900mm Sliding Table: 3.700mm Main saw: 9.5 kW frequency controlled Saw Blade Arbor: Ø30 mm main saw blade arbor, 2 pcs 10 mm drive pins Saw Blade replace: ProLock” quick change system Saw Blades: Ø 250 – 550 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades Cutting Heigt: 204 mm. Blade Width: -46° tot +46° Cutting Width: 1.350 mm Scoring Blades: 3-ax electric controlled scoring saw aggregate Cross cut table: Para ...
MARTIN T73 AUTOMATIK, Parallelogramtisch, angetriebener Rollwagen, 3-Achs Steuerung Mark: MARTIN Type: T73 AUTOMATIC Baujahr: 2001 M-Nr.: V424244 Tischabmessung: 1.350 x 1500 mm. Tischhöhe: 900mm Besäumtisch: 3.300mm Hauptsäge: kW Sägeblattwelle: ø 30 mm. mit zwei Mitnehmerstifte Sägeblattwechsel: Schnellwechselsystem ProLock” Sägeblatter: Ø 250 – 500 mm; bis Ø 400 mm unter Tisch versenkbar; Schnitthöhe: 170 mm. (Sägeblatter. 500 mm.) Sägeblatteschwenkung: 0 – 46° Schnittbreite: 1.350 mm Parallelanschlag: Anschlaglineal in eloxiertes Aluminium; Endstellung; Automatisch unter Tischebene absenkbar Längenanschlag: Digitaler Längenanschlag aus eloxiertes Aluminium mit Martin 2-Punkt Anschläge Steuerung: NC-Steuerung mit LCD-Anzeige der Breite, Höhe- und SchrägeWinkel, plus 2 digitale Längenanschläge Bildschirm: LCD Bedienpult auf Augenhöhe, wegschwenkbar mit Tablea ...
BSM P450 CE Manufacturer: BSM Type: P450CE M-Nr.: 0904088P450 Year: 2009/04 Cutting height (Max): 135mm Saw diameter (max): ø450 mm Saw blade inner-ø: ø30 mm Saw width (max): 800mm Saw blade tilting: 0-45° Motor: 5,5 kW Weight: 320 kG Including: Table extension rearside
maximum number of results exceeded
please refine your search
750 € 
