129,270 used machines on RESALE, but how to find them? Machine Search
Equipped with Positron S frequency control Auction-ID: A1-41275-7
OMGA Radial RN 450 Radial Saw Cutting width 90° max 450mm Cutting height max 80mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.21kw main motor Saw size 300mm Power supply 220V
Key data: 90 °, 2000 mm, 1250 mm
Format saw Gazolin with scoring Trimming length 2000mm Motor 5.5 KW Very good condition
Serial number: 225568451; PTO drive with PTO shaft; 3-point pick-up, hydraulic operation, adjustable cutting length 20/25/33/40/45/50/54 cm, attached discharge conveyor belt, approx. 4m, hydraulically foldable and driven Auction-ID: A7-45435-2
Machine: Motorized saw with turntable Engine: 12 kW direct, 3000 rpm Blade: Ø650 mm carbide Cutting heights: 90° = 245 mm / 45° = 164 mm / 30° = 113 mm Blade inclination: 90° to 30° (servo) Turntable: 0-270° motorized (servo) Equipment: laser indicator, aluminium stops 120x120 (3 m + 5 m), L/R roller conveyors (3-4 m), safety light curtain, PVC cover, 320 mm discharge tables, mesh panels, linear support 1660 mm Clamping: Pneumatic vices L/R, 2-hand bending device, table clamping cylinder with brake Length measurement: servo system with material valves, roller tracks 3-14 m Options included: Multi-length LiVoMat, GAMA 65V pneumatic side feed, additional conveyors, speed sensors Safety: full cover + multiple protections Auction-ID: A1-45443-17
2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-116
2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-112
2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-111
KASTO PKS 140 — Datasheet Feature Value Blade diameter Ø425 mm (HSS) Cut (round) Ø10–140 mm Cut (square) 10×10 →125×125 mm Cutting (flat B×H) 140×125 mm Max Depth (HSS) ~300 mm Feed rate 16–600 mm/min (programmable) Inlet speed 5000 mm/min Blade motor HSS 10.0 kW / HM 29.0 kW HSS cutting speed 6–70 m/min · HM 80–150 m/min Max. tightening Princ. 2200 daN · Advance 1400 daN Hydraulics 3 kW Cooling pump. 25 l/min · 0.1 kW Bearing height 950 mm Precision power supply ±0.05 mm/300 mm Conveyor length: 5400 mm. Safety light bar included. Auction-ID: A1-44765-1238
2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-15
An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.
Key data: 45 °, 3200 mm
Format Saw Robland Type: Z 3200 Year of construction: 90s Swivel format saw with scoring Diameter saw blade 400 x 30 mm Max. cutting height 125 mm Tilt adjustment 0 – 45° Max. cutting height at 45° 100 mm Saw blade speeds: 3000/4000/5000 rpm. Motor 5.5 kW Scoring diameter 100 x 20 mm Cutting height scoring 0 – 4.5 mm Inclined adjustment of scoring 0 – 45° Speed scoring 7000 rpm. Table size 1530 x 700 mm Table height 840 mm Dimensions of rolling table 400 x 3200 mm Cutting length 3200 mm Cutting width to the right of the saw blade 1380 mm Suction nozzle diameter 120 mm Net weight 1150 kg Packaging dimensions 2270 x 1330 x 1020 mm + 3250 x 450 x 200 mm
Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price
Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price
Key data: 45 °, 2800 mm, 800 mm
Sliding Table Saw Table Saw Circular Saw Carpenter Saw Altendorf Type: F45 Year: 1978 Sliding table length: 280 cm Trimming width/ rip fence approx.: 80 cm Parallelogram Guard with Top Extraction Hood Boom table with cut-to-length stop Miter stop Motor power: 5.5 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. the indicated shipping costs are an approximate price, depending on the distance and unloading option, they may vary. Please inquire. The item offered is offered with differential taxation. The sales price shown is the gross final amount. An invoice with VAT will not be issued. ...
2 UNITS/SETS OF LON0020 PACKED TOGETHER. A SINGLE LON0020 CORRESPONDS TO: Machine engineered to sharpen circular blades made in carbide and steel. With accurate setting it can sharpen teeth automatically with adjustable speed. The motor can rotate in 2 directions so as to sharpen both angles of the blade. Sharpening diameters: from 60 to 300 mm, up to 45 teeth per minute. Power 550 W. Item dimensions 650 x 650 x 1050 mm. Item weight 103 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 630 x 1130 mm; Approx. Weight: 103kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x LON0020 PACKED TOGETHER: 650 x 1260 x h1130 mm - 206 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43157-15
Dräger Circle System Absorber Pot Breathing Lime Container Circular System Carrier Unaudited Auction-ID: A7-45427-74
Unaudited Auction-ID: A7-45427-219
1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm
Offer 26098 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° to : around 130 mm - Square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade infinitely variable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydr. Material vise, infinitely adjustable clamping pressure - Hand crank for fine adjustment - Restraint adjustable - Coolant device - Discharge roller conveyor with dimension stop 5000 mm - Feed roller conveyor 4000 mm - Space requirement approx. W 800 x H 1770 x D 1020 mm - Weight approx. 950 kg
Speed 40/80 1/min, incl. inlet and outlet Auction-ID: A1-45239-2167
An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.
Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible.
Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor
Manual pull-down miter saw with metal support bench Estimated weight: 80 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-44996-157
Main motor 5.5kw 3 RPMs Maximum saw blade -350mm Scoring 0.75KW -120mm Parallel guide on the right side - manual Adjustable up to 1230mm Tiltable 0-45 degrees Height adjustment (up/down) Dust extraction included - connected to the same 380 circuit Saw blade for solid and sheet material Cavity knife available Auction-ID: A3-43511-19131
TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm .. to: 220 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%
Key data: 45 °, 3000 mm, 1100 mm
MARTIN T74 Classic YOC 2007 Main sawing unit: 5.5 kW Rated current: 22 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 – 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Rip fence can be lowered manually max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor 5.7" touchscreen control Digtial length stop Parallelogram cross table with digital display Main Saw Blade Change: ProLock Central lubrication Compressed air supply required Operating hours read: 596 h Extraction connection: 120 + 100 mm Weight: approx. 1900 kg
Equipped with: adjustment knob, protected saw blade Auction-ID: A1-41992-87
Circular saw machine KALTENBACH for Aluminum and non-ferrous metals Model: SKL 400 H Continuous diameter: Ø 400 mm Cut area 90° Round material: 130 mm Square material: 120 mm Knit profile: 315 x 40 mm 45° Profile lying: 220 x 60 mm Profile stehend: 80 x 120 mm Cutting speeds for HSS and HM stool sheets: 1300 / 3000 m/min For HM-Sägeblätter: 1750 / 3500 m/min Brake motor 1430 / 2880 n: 3.7 / 4.5 kW Saglatt Advance speed stufenloos adjustable: 0 -1100 mm/min Slope of the Sägeblattes: 3000 mm/min Machine weight: 650 kg Dimensions W x D x H: 1000 x 1300 x 1950 mm Auction-ID: A1-41992-94
Saw blade diameter 350-400 mm, cutting speeds 9-20 m/min, hydraulic flow rate 6 l/min, feed speed 0-1000 mm/min, express return 1800 mm/min Auction-ID: A1-45714-44
RM Group PS 400 (2011) sliding table saw with sliding carriage, ideal for precise cutting of panels and solid wood. Robust machine, equipped with digital display, in good working order. Auction-ID: A3-43515-38046
CIRCULAR SAW - MEP COBRA - N° 017048 NTR SERIES FOR ALUMINIUM Auction-ID: A1-45663-22
saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden
Circular saw machine KALTENBACH for Aluminum and non-ferrous metals Model: SKL 400 H Continuous diameter: Ø 400 mm Cut area 90° Round material: 130 mm Square material: 120 mm Knit profile: 315 x 40 mm 45° Profile lying: 220 x 60 mm Profile stehend: 80 x 120 mm Cutting speeds for HSS and HM stool sheets: 1300 / 3000 m/min For HM-Sägeblätter: 1750 / 3500 m/min Brake motor 1430 / 2880 n: 3.7 / 4.5 kW Saglatt Advance speed stufenloos adjustable: 0 -1100 mm/min Slope of the Sägeblattes: 3000 mm/min Machine weight: 650 kg Dimensions W x D x H: 1000 x 1300 x 1950 mm
Stock number: D1242, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: 4 pcs. legs, Motor: 0,18 kW - 220/380 Volt, Table plate diameter: Ø 1200 mm., Table plate material: Plastic, Total height: H 1200 mm.
Stock number: D1237, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: 4 pcs. legs, Motor: 0,09 kW - 220/380 Volt, Table plate diameter: Ø 800 mm., Table plate material: Stainless steel AISI 304, Total height: H 980 mm.
Stock number: D1238, In stock: Yes, Amount in stock: 1 pc., Item: Circular table, Standing: 4 pcs. legs, Motor: 0,09 kW - 230/400 Volt, Table plate diameter: Ø 800 mm., Table plate material: Stainless steel AISI 304, Total height: H 1150 mm.
Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.
Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250
TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340
Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good
maximum number of results exceeded
please refine your search
250 € 
