circular knitting used for sale

Pendulum circular saw Irion with roller conveyor Cutting height 100 mm Roller conveyor left 2m Roller conveyor right 3.5 m L x W x H: with roller conveyor 6.0 x 1.2 x 1.5 m Weight approx. 450 kg Year of construction 1965 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.

saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 410 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 1.600 x 5.500 mm - Decks: 2 - Included Electrical motor and springs - Will be overhauled, sandblasted and painted

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Size: 2.200 x 6.800 (5.750)mm - Year of Manufacture: 2002 - 2 Decks - Included: 18 kW Electrical motor, Cardan shaft and Springs.

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Size: 1.800 x 4.000mm - Year of Manufacture: 1998 - With Electrical motor (11 kW/6), Cardan shaft and springs - Will be overhauled, sandblasted and painted.

OVERHAULED - Size: 1.400 x 3.000 mm - With Electrical motor, Cardan shaft and Spring elements.

Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted.

Size: 1.400 x 2.400 mm - Included: Electrical Motor (4 kW / 1.060 RPM) and springs - Will be overhauled, sandblasted and painted.

OVERHAULED - Size: 1.500 x 2.000 mm - Included: Electrical motor and springs

Size: 1.500 x 4.500 mm - Decks: 4 - Included: Electrical motor and springs (Frame not included)

OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.

HewSaw SL250 Trio sawing line from year 2005 consists of log positioning devices, conveyors and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 6.2 m. Feeding speed of the sawing line can be adjusted from 50 m/min to 150 m/min. - Top diameter: 100–420 mm - Maximum log diameter: 550 mm - Cant height in Chipper Canter: 75–410 mm - Cant width in Chipper Canter: 75–410 mm - Cant height in Rip Saw: 63–310 mm - Cant width in Rip Saw: 75–410 mm - Saw kerf: 4.2–5.0 mm B2d2yohbnx - Chip length: 20–30 mm Sawline: 1.Measuring conveyor 2.Log positioner 3.Chipper canter 4.Cant scanning conveyor 5.Cant saw 6.Separating conveyor EK2 7.Cant turner 8.Infeed conveyor 9.Rip saw waste handling conveyors electric and control system hydraulic system

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Diameter: 800 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Diameter: 800 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Horizontal/vertical Clamping surface: Diameter: 350 mm Table height: 150 mm Machine´s weight about: 100 kg Dimensions: Length: 500 mm Width: 450 mm Height: 150 mm Various accessories: Tailstock Centre height: 250 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 320 mm Table height: 128 mm Machine´s weight about: 80 kg Dimensions: Length: 430 mm Width: 330 mm Height: 128 mm Various accessories: Digital readout number of axis:

Circular table,stainless steel,Tang & Weiss type IN FEED,Ø 900 mm.

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Clamping surface: Diameter: 280 mm Number of T-channels: 4 T-channel width: 12H7 mm Weight: 40 kg Dimensions: Length: 500 mm Width: 350 mm Height: 100 mm Various accessories: Dividing plate

Technical data Clamping surface: Diameter: 350 mm Number of T-channels: 4 T-channel width: 14H7 mm

Article number: 27-01-110 Manufacturer: Kesel Very good general condition Machine workshop-tested / suitable for, among other things: Marking of scale rings & plates Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1200x700x1200mm Weight: approx. 150kg Largest diameter to be divided: for division on a flat surface: approx. Ø 500 mm when pitched on a cylindrical surface: approx. Ø 250 mm Max. workpiece weight: approx. 20kg Max. workpiece height: approx. 200mm Max. line width: approx. 0.5mm Max. line depth: approx. 0.5mm Max. line length: approx. 60mm Partial speed: approx. 80 strokes/min Accuracy of division: approx. +/- 2min Accessories: Operating instructions Other accessories on request Price and other technical data on request

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Clamping surface: Diameter: 120 mm Machine´s weight about: 120 kg Dimensions: Length: 550 mm Width: 450 mm Height: 280 mm

Technical data Rotary table Dimensions: Length: 600 mm Width: 500 mm Height: 110 mm

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Clamping surface: Diameter: 120 mm Machine´s weight about: 120 kg Dimensions: Length: 550 mm Width: 450 mm Height: 280 mm

Technical data Rotary table Clamping surface: Diameter: 200 mm Number of T-channels: 3 T-channel width: 10 mm Machine´s weight about: 40 kg Dimensions: Length: 400 mm Width: 330 mm Height: 100 mm

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Execution: manual Table: Length: 330 mm Width: 200 mm Saw blade diameter: 200 mm Saw blade thickness: 6.5 mm Rotation speed: 2700 rpm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 200 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1300 mm Various accessories: Set of blades Single stopping device

min. grindable saw blade diameter:16 mm max. grindable saw blade diameter:315 mm chip pocket:16 mm stroke rate grinding carriage:90-135-200 min. grinding wheel diameter:160 mm grinding spindle speed:2800 u. 5200 U/min feed rate pro saw blade rotation:0,05; 0,10; 0,15; 0,20 mm 100 % before loading warranty: none one used circular saw sharpener make WMW-Königsee, type SWSK 315, year of production

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Clamping surface: Diameter: 380 mm Number of T-channels: 7 T-channel width: 10H7 mm Weight: 80 kg Dimensions: Length: 550 mm Width: 400 mm Height: 150 mm Various accessories: Dividing plate

Technical data Rotary table Clamping surface: Diameter: 320 mm Number of T-channels: 6 T-channel width: 14 mm Dimensions: Length: 450 mm Width: 400 mm Height: 150 mm

saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm

saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m

v.v. clamping device; incl. supply/output roller conveyor; web width approx. 285 mm

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Feeding length automatic feeder: 0 mm Diameter sawing blade: 0 mm Technical data Execution: semi-automatic Swivelling range: 0 - 90 ° Max. saw blade diameter: 370 mm Saw blade size: central bore: 40 mm driving hole: 10 mm hole circle: 63 mm Speeds: number (steps): 4 from: 16 rpm up to: 92 rpm Voltage 50 Hz 3x: 380 Volt Power: 2.6 / 3 kW Overall dimensions machine: Length: 3600 mm Width: 1200 mm Height: 2000 mm

Lifting arm aborted with damage

Operation unknown, not tested

Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0   Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 310 mm Number of T-channels: 8 T-channel width: 14H7 mm Machine´s weight about: 50 kg Dimensions: Length: 500 mm Width: 450 mm

Technical data Rotary table Dimensions: Length: 600 mm Width: 500 mm Height: 110 mm