We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,293 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
minimax sc4e Format circular saw Motor 5kw 400V 50hz Suction nozzle diameter 120mm Suction nozzle. Saw blade protection 60mm Cutting width with parallel stop 900mm cut-off width on the left 3200mm Hem length: 2310mm Saw blade inclination 90-45° cutting height 90°: 100mm cutting height 45°: 63mm Saw blade diameter: 4000 1/min Weight approx. 454kg G&STÜ-5504524 Optional: Pre-scratch and upper protective hood
new
Code: N0750 Brand: SCM Model: CLASS SI 400 EP - CE Standard Electronic-programmed circular saw with tilting blade - CE Standard Technical data Blade diameter mm 400 Cutting height mm 140 Programmed blade lifting and tilting Scoring unit Main blade motor Hp 9,5 Scoring unit motor Hp 1,7 Carriage length mm 3800 Start/stop buttons integrated in the sliding carriage Electronic position reader for parallel guide with manual movement
used
SPECIFICATIONS: Length of the sled mm: 3000 Saw blade diameter mm: 350 Diameter chair mm: 120 Inclinable
used
Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg
used
- pneumatic swivelling of the saw head - pneumatic workpiece clamping - incl. operating instructions in German - Year of construction 1996 Specifications - Saw blade Ø: 450 mm - Miter range: +/- 45 ° - Connection voltage: 400 V - Dimensions WxHxD: approx. 1050 x 1600 x 1300 mm - Weight: approx. 500 kg
used
Description 0043-664-2803850 Specifications: Cutting depth 85 - 165 mm Cutting depth at 45° 60-116.5 mm Cutting depth at 60° 42-82.5 mm Swivel range 0 - 60° Idle speed 1500-1800 1/min Rated power 2,800 W Weight 15.3 kg Suction connection 58mm Description: The carpentry hand saw with exceptional weight/performance ratio! This is only possible through the use of state-of-the-art magnesium die-cast alloys. Swivelling up to 60°, this makes the hand-held circular saws a universal partner. The easy-to-read scale on the rotary wheel of the cutting depth adjustment makes the work easier and saves annoying remeasurement. For optimal handling and better control, the carpentry circular saw is equipped with soft start, constant speed under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable suction nozzle make your work m ...
used
very stable automatic with protective lock and max. 275 saw blade
used
fully hydraulic circular shears , capacity 6 mm ,
used
Fully automatic circular saw with miter cut - up to 300 sawing programs - single stroke 1,000 mm, repeatable as desired - Saw blade: HSS 370 x 32 x 3 mm - Blade speed: 5 - 150 1/min - Vice opening 190 mm
used
saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006
used
YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made
used
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
used
Specifications Year of construction: 1995 Saw blade Ø (mm): 400 Directly from the customer used from November from CH-Pratteln available.
new
Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE
used
Eisele PSU Hydraulics 470 Masch Nr 1141 Built 1986 RPM 6-48
new
Weibert SMA-700T Rocker saw PTO drive Tractors power min. 15hp PTO speed: max. 540 rpm Drive saw blade: belt drive Saw blade speed: max. 1440 rpm Saw blade diameter: 700mm Carbide-tipped Holder 30mm, tooth pitch 32mm, thickness 3.2mm Total weight 136kg Dimensions: 109mm x 85mm x 110mm (LxWxH) G&JAN-1055004
new
Minimax SC4E Sliding table saw Motor 5kw 400V 50hz Suction nozzle diameter 120mm Suction nozzle. Saw blade protection 60mm Cutting width with parallel fence 900mm length width left 3200mm Trimming length: 2310mm Saw blade inclination 90-45° cutting height 90°: 100mm cutting height 45°: 63mm Saw blade diameter: 4000 1/min Weight approx. 454kg G&STÜ-5504524 Optional: Scorer and top protection hood
used
– year of production 1998 –optimization – cutting to the line – width measurement – possibility of cutting aluminum TECHNICAL PARAMETERS: .max. cutting length 4000 mm Min. element 200 mm .max. cutting height 100 mm .max. cutting width 260 mm disc diameter 500 mm engine power 9 kW feed speed max. 160 m/min acceleration 2 m/s2 optimization in relation to length and value pneumatic material pressure three ejectors drop tables rotary table total length 2000 cm transport dimensions (L/W/H) 1300 / 245 / 220 cm weight 3500 kg
used
– Italian production – year of manufacture 2009 – full optimization –DTR –CE TECHNICAL PARAMETERS: cutting width max. 260 mm cutting height max. 120 mm engine power 7,5 kW material length max. 4000 mm receiving table 3000 mm disc diameter 500 mm feed speed 60 m/min possibility to program 100 dimensions of cuts programming of 5 classes of wood automatic and semi-automatic operating mode total dimension (L/W/H) 930 / 150 / 170 cm
used
– after technical inspection – German production – year of manufacture 2005 TECHNICAL PARAMETERS: .max. length of cut material 4500 mm .max. width 360 mm .max. height 160 mm automatic length measurement optimization in 4 quality classes total power 13 kW disc motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500 mm OptiCom Assist control receiving conveyor 5600 mm two ejectors overall length 13 m printer for marking elements cutting accuracy +/- 0.5 mm transport dimensions (L/W/H) 600 / 240 / 190 cm weight ~ 1800 kg
used
– after technical inspection – year of manufacture 2004 – declaration of conformity, DTR – German production TECHNICAL PARAMETERS: min./max. element input length 800 / 3500 mm .max. input width of the element 200 mm min./max. element input thickness 12 / 80 mm type of hard/soft wood cutting to the line wood classification .max. feed speed 120 m/min acceleration 5 m/s saw diameter fi 500 mm saw bore diameter 30 mm number of spindle revolutions of the saw 4600 U/min duration of 1 cycle 0.7 - 1.2 sec driven transporter at the entrance and marking station with side tables for two marking belt conveyor total power 15 kW length measurement – fluorescent camera for 3 quality receiving station – conveyor belt total length 8300 mm connection diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz
used
: gebraucht : 1999 : 6173 : Deutschland : 11900 € : 1 : 500 mm : 2800 U/Min : Rund 180 mm, Quadratprofi : Rund 120 mm, Quadratprofi : 1100 mm : 1450 mm : 1350 mm : 490 kg hydropneumatic saw feed new HM saw blade pneumatic material clamping device vertical automatically opening protective cover discharge roller conveyor 450 mm with stop and measuring system roller 4.780x850x1.000 mm display E110, 1/10 mm pneumatic clamping handwheel locking in the operating area stop can be folded up user manual in GERMAN COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
– German production, instruction manual – year of manufacture 2008 – automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 800 mm cutting height max. 130 mm feed smoothly adjustable up to 80 m/min main engine power 11 kW disc diameter max. /Min. 600 mm / 400 mm possibility to program 100 dimensions line laser two-stage blade feed touch panel control connection diameter 2 x 160 mm machine dimensions (L/W/H) 620 / 160 / 220 cm weight 2250 kg
used
– Polish production – DTR, CE – year of manufacture 2011 TECHNICAL PARAMETERS: minimum length of material after formatting 800 mm maximum length of material after formatting 1600 mm maximum material width 480 mm maximum material thickness 145 mm disc diameter 500 mm smoothly adjustable feed 0-20 m/min main motor power 2 x 5,2 kW feed motor power 1.5 kW machine dimensions (L/W/H) 340 / 230 / 180 cm weight 2500 kg
used
Operating voltage: 400 volts, power: 4 kW, speed: maximum 6,000 rpm, saw blade diameter maximum: 400 mm, work table with 2 T-slots width: 2500 mm, adjustable with depth stop: 0 - 800 mm, with suction device Errors excepted!
used
used
Equipment: - Scoring saw unit - Miter stop - Trimming length 3300 mm - Cutting width 1100 mm, can be moved by hand, with digital display - Cutting height above hydr. Foot pedal adjustable - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrical: 380 V, 50 Hz, 3~, 13.0 A
used
Specifications: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - largest opening width of the vice 145 mm - Cutting range with saw blade diameter 300 mm - at 90° about 95 mm Flat 125 x 90 mm - at 45° about 95 mm flat 95 x 85 mm - miter adjustable left to 30° + right to 45° - Saw blade speeds 40 + 80 1/min - Drive 400 V / 1.6 / 2.1 kW - Coolant device - Discharge roller gear 3000 mm - Space requirement approx. W 600 x H 1700 x D 800 mm - Weight approx. 250 kg
used
No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...
used
Type SI 15 WF Dimension of sliding table 2700x2300mm Table travel 2600 mm Max. the length of the ruler by saw 900 mm Saw blade diameter 400 mm Blade tilt 0-45 deg Table size: 1150x630 mm Main spindle diameter 30 mm Main motor 11 kW 380 V Maximum clearance 140 mm Transport dimensions 2700 2700x1800x1200 mm Weight 820 kg Price 1200 Eur (EXW Jonava, Lithuania)
used
: ca. 12 - 14 Wochen ab Auf : Türkei : 20000 € : 408 € : 5 mm : 1200 mm : 2,2+0,75 kW : 4,1 m/min : 3000 mm : 750 mm : 1400 mm : 1350 kg : 250 / 2000 mm : 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment: 1 spare blade set € 1.200,00 Flanging attachment with 1 set rolls € 2.000,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Saw blade diameter: 400 mm Connection: 400 V Equipment: - 2 sawing units - Pneumatic vice
saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm : 190 x 190 mm Capacity 45° rectangular: 260 x 100 mm : 230 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 4,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1400 x 820 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - ...
used
Table saw
used
Circular saw Manufacturer: MEP Type: Tiger 350
new
Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...
used
Three-saw format saw – solid construction TECHNICAL PARAMETERS: .max. cutting width 3050 mm Min. cutting width 450 mm .max. cutting height 100 mm Blade diameter 450 mm motor power 3 x 4 kW feed motor power 1.5 kW Receiving conveyor sawdust 6200 mm material pressure transport dimensions (length / width / height) 620 / 200 / 120 cm weight ~ 800 kg
new
Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up ...
used
Saw blade diameter: 400 mm Sawing capacity: 130 mm round / 120 x 120 mm square Saw adjustment: 45º left/right Saw steps: 13/17/25 mtr. per min. Main engine power: 2.7 kW Country of origin: Germany Machine weight: 900 kg Machine LxWxH: 1080 x 900 x 1760 mm
used
Dimter Opticut 302 Optimizer Cutting out errors and fixed lengths The machine after a comprehensive overhaul in 2019 Year of Build 2000
used
saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,6 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 300 mm capacity 90 degrees: round: 102 mm capacity 90 degrees: square: 90 mm capacity 90 degrees: flat: 120x80 mm capacity 45 degrees: round: 90/80 mm capacity 45 degrees: square: 80/70 mm capacity 60 degrees: flat: 90x70/85x70 mm total power requirement: 1,5/2,0 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,5 x 1,05 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Martin T60Classic sliding table saw Brand Martin Type T60C M-No.: V465053 Control panel Touch screen integrated at eye level in the suction support 2-axis control (saw height, inclination, manual cutting width via handwheels, but with digital readout on touch screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivelling: 0° - 45° Speed control: 4.000/4.800/6.000/ tpm Motor: 5.5 KW Trolley: 3,000 mm Cutting width: 1,250 mm mm Laying table: Galvanized steel with fixed-angle stops 0º, 22.5º, 30ºen 45º. Dimensions: 1,340 650 mm Long stop: 2,200 - 3,300 mm with 2 folding attachments and fine adjustment Suction: Top: ø100 mm, Bottom: ø120 mm weight: 1.400 KG Condition: fully functional tested
used
SPECIFICATIONS: Circular saw with 45° swiveling saw blade Saw blade diameter mm: 400 Diameter of the scorer mm: 120 Length sliding carriage mm: 3000 cutting width mm: 1300 Drive power KW: 5,5 Engine brake Complete with: - 1 pneumatic stop - Digital control system
used
Martin T60Classic sliding table saw Brand Martin Type T60C M-No.: V465053 Control panel Touch screen integrated at eye level in the suction support 2-axis control (saw height, inclination, manual cutting width via handwheels, but with digital readout on touch screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivelling: 0° - 45° Speed control: 4.000/4.800/6.000/ tpm Motor: 5.5 KW Trolley: 3,000 mm Cutting width: 1,250 mm mm Laying table: Galvanized steel with fixed-angle stops 0º, 22.5º, 30ºen 45º. Dimensions: 1,340 650 mm Long stop: 2,200 - 3,300 mm with 2 folding attachments and fine adjustment Suction: Top: ø100 mm, Bottom: ø120 mm weight: 1.400 KG Condition: fully functional tested
used
Key data: 520
Sensational DIMTER optimizer OPTICUT 200 ELIT Machine from the production line, Complete machine, to it we will give a set of inlet tables, as well as a complete outlet. Measuring station, everything included Machine not running. Connect electronically and pneumatically, run the program At the customer's request, we can arrange it for a fee. Machine after mechanical overhaul in our plant If you have any questions, feel free
used
Table length: 3,800 mm Cutting width: 1,270 mm Scoring aggregate (saw blade Ø 120 mm) Saw blade-Ø max 400 mm Cutting height max. 130 mm Moro power 5.5 kW Speed 3,000 / 4,000 / 5,0000 rpm electr. adjustment of saw blade height, Saw blade swivel and cutting width Control in the machine body Length stop with digital displays Weight approx. 970 kg Technical data subject to actual equipment
used
The circular saw is in used condition and is functional. Condition see pictures. Visit and demonstration possible. The prices quoted are net prices for collection ex works. A chargeable transport within Germany can be arranged.
used
General: Power 1.5 kW 16 A Other equipment and accessories included: Coolant device 2 saw blades