cip used for sale

CIP SYSTEM 3 X 300 L Tanks HEAT EXCHANGER STEAM VALVES CONTROL PANEL CONDITION : NEVER USED SKID MOUNTED AVAILABLE IMMEDIATELY

KHS Innopro KZE CIP Aseptyka 32m3/h 2006, well-kept from Switzerland INNOPRO CIP aseptic line. Type: INNOPRO KZE/CIP, Efficiency 32m3/h Total dimensions width x length x height: 1450 mm x 3000 mm x 3650 mm Electrical connection: 400V, Current: 52 A, Fuses 63 A, UTILITIES: STEAM Year of production: 2006. Dismantled from a mineral water factory in Switzerland in February 2024

Bohle BFC 200 Ex CIP Film Coater for tablets, etc., batch size from 100 to 300 litre, spray arm with up to 6 spray nozzels, CIP-system, 37 kW, Siemens SIMATIC S5, machine net weight approx. 2500 kg, includes inlet air preperation/handling and exhaust air handling

CIP 100, CIP system with 2 x 100 litre tanks, new

CIP 300, CIP system with 2 x 300 litre tanks, new

Used stainless steel CIP station. The CIP station includes: - 4 x 3000 L stainless steel tanks: fresh water tak, acid tank, alkaly tanks, hot water tank - 2x desinfectant tanks - 2 x heat exchangers for heating up returned water - 2 x pumps model gu30/30 and 1 x pump gh 20 - control cabinet with Siemens PLC - piping + valves + counters + senseor

CIP system, 2 x 200 litre tanks, new

Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customers needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition th ...

year: 1991, modification controls and measuring technique 2004 no of tanks: 3 pcs (water, caustic, recovered water) material: s/steel heating: steam Consisting of: 1 x CIP-caustic tank content: 7.000 l, make: AMS 1 x CIP-hotwater tank content: 7.000l, make: AMS 1 x recovered water content: 4.000l, make: AMS - controls Siemens S7, new measuring technique 2004 - incl. all valves and pumps - incl. heat exchanger - incl. internal piping

CIP-plant,stainless steel,STRANGKO-CIP,fully automatic wash,3 x 350 l.

Heating method: steam or electric CIP is controlled by processor SIEMENS- S7

Two Tetra Pak CIP system

Used CIP station composed of: - 4 tanks with a capacity of 3000 L each: fresh water, acid, lye, hot water - 2 disinfectant tanks - 2 steam-water heat exchangers for heating media - 1 steam-water heat exchanger for heating secondary water - 2 gu30/30 pumps, 1 gh 20 pump - 1 control cabinet – Siemens PLC control - pipes + valves + meters + sensors

Procomac UNICLEAN 2R 2 OP1 BA A 20 1999 The Uniclean units is a modular system comprising five units Thinned NaoH stocking unit Thinned HNO3 stocking unit Electrical panel Pneumatic panel Heat exchanger unit The purpose of this system is to sterilise the machine at the end of each work shift and whenever necessary for hygienic purposes for example before activating the production line after a lengthy line stoppage week end NaOH Dilutions 1 3 HNO3 Diluitions 1 3 Consumptions Water 20 M3 H Steam 750 Kg H Air 3 Nm3 H [...for more information send your inquiry to the seller.] refno: AT38

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...

Overview This filtration unit was built in 2016 by Czech manufacturer Bílek Filtry. This machine is like new as it was barely used. Microfiltration can replace pasteurization of the product. This results in lower acquisition costs, lower operating costs and no influence on the taste of the beer due to pasteurization. Techn. Details Max. output when the end elements are fitted (depends on the filtered beer and parameters of the filling line): 18 hl/h (Prepor NG elements: - absolute capture of yeast - reduction of bacteria) 12 hl/ h (Bevpor PH elements: - absolute capture of yeast - absolute capture of beer by harmful bacteria) Number of heated containers 1 Container volume 120 l Heating power kW 12 Water filter assembly Components Micro-filter assembly Consists of two filters - the FMS pre-filter and the FMS final filter Mounted on a common frame and connected by a pipe with fittings Fil ...

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

Complete dairy - Plate heat exchanger / milk heater from API Schmidt boards automatic heating system including documentation and temperature recording - 3 x tank storage 1000 l. each with agitator (insulated) - CIP cleaning system 3 x stainless steel container (500 l.) with direct steam injection - Process tank 160 Ltr. Content

Dima Whey roller Model: DM06 CIP Serial: 6201 Stainless, whey roller, roller length 1300mm, roller diameter 500mm, bolts onto 1.6M high frame, 3Ph

1x CIP station ‐ 3100L Tanks ‐ 1 tank of which heated 8kw ‐ Temperature control ‐ incl. sanitary pump

General SKU212T528 LocationBarneveld MakeCINC Deutschland TypeCINC V 10 No.10000113 Year of construction2002 Main Features MaterialStainless steel Capacity700 Ltr./Hr. Motor5.5 KW Specified Features - Separator Separatorcheck Capacity700 Ltr/h Suitable forfluids Motor5,5 kW, 220/400 Volt, 3500 rpm (EX) Max. rotor speed1700-3500 rpm Inlet55 mm (2x) Liquid outlet55m (2x) MaterialStainless steel 1.4435 (316L) Information Mounted on mild steel framecheck Total height1,6 m Weight500 kg Floorspace1,1x0,75 m ATEX compatiblecheckSeparatorsCINC DeutschlandCentrifuges > SeparatorsBrand > CINC Deutschland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

Used Syrup Room 15 000 Lt h PROGECO 2003 This is a used Syrup Room from PROGECO a well known manufacturer in the industry The model is SS 450 and was manufactured in 2003 It has a speed of 15000 liters per hour making it a suitable option for high volume syrup production Currently the Syrup Room is in a ready to operate state and comes equipped with necessary safety features to ensure secure operations Additionally manuals are provided to facilitate easy installation and maintenance The Syrup Room runs on V 380 kW 37 and Hz 50 electrical data making it a reliable option for powering large scale syrup production operations With its high speed capacity and reliable performance this used Syrup Room from PROGECO is an ideal solution for any syrup production facility Technical Data 4000 liter agitator sugar dissolving tank dissolution exchanger plate heat exchanger for 12 000 liters for heat  ...

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP ball ...

Overview This whole brewery, including a complete can filling line, a complete glass filling line, and other extensive brewing equipment was built up in 2015. Most of the equipment is from 2017, is still installed and can be visited. CANNING ROOM Canning line, Wild Goose MCE-250 4-head + accessories, conveyor belts, flow meters, labelling machine, date coder, air compressor,stare parts, etc. CCT tank, 20 HL IFIND CCT tank, 30 HL, Staes   CIP installation CMC-KUHNKE SEAM Scanner + Laptop 1 2020 Labeller, self-adhesive, CDA VIDE /ROOF Glycol tank, pipes, pumps (3), control unit, etc. Kaeser airboxcenter, compressor, airdryer, oil/water seperator, etc. 3x Chillers Cool Tower ICS Cool Energy Small air compressors, pump, storage racks, etc MALT STORAGE Air compressors, storage racks, pipes, etc. MALT GRINDER Complete with all pipes, transportsysteem, blowers, etc. BREWERY Brewhouse Johan Alb ...

Enoberg Bottle Filling Monoblock for still water This used Bottle Filling Monoblock model EVF 24 24 6 N S comes with an integrated rinsing filling and capping system and consists of A rotary rinser with 24 nozzles for the rinsing of bottles A rotary filler with 24 valves for the electronic volumetric filling A capper with 6 heads for the application of plastic screw caps or pressure caps Monoblock Bottling with a machine pitch of 150 72 mm Counterclockwise machine Neck Handling bottle conveying system Key features The Enoberg Filling Monoblock for still water distinguishes itself with its compact frame which considerably simplifies operations to manage clean and maintain the machine and ensures substantial savings on space Filling module equipped with electronic meters to ensure precision The working space of the machine is entirely made of stainless steel and glass ensuring a high stand ...

Isolated, process tank, previously used as in a dairy factory as CIP tank. Volume 10.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole on top of the tank. CIP bowls (3x) for cleaning inside the tank. Small coil inside. Agitator connection but without agitator itself. 3 Stainless steel legs. Outlet in the bottom, 500 mm height, with pneumatic outlet valve. Cylindrical height: 2.350 mm. Total dimensions: Ø 2.450 x 4.200 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 10.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, 440 mm, Number of feet: 3x, Internal height: 2.350 mm, Total outsid ...

Isolated, process tank, previously used as in a dairy factory as CIP tank. Volume 10.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole on top of the tank. CIP bowls (3x) for cleaning inside the tank. Small coil inside. Agitator connection but without agitator itself. 3 Stainless steel legs. Outlet in the bottom, 500 mm height, with pneumatic outlet valve. Cylindrical height: 2.350 mm. Total dimensions: Ø 2.450 x 4.200 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 10.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, 440 mm, Number of feet: 3 ...

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

Filmatic BottleFilling Line Year: 1993 – reconditioned in 2019 Filling Heads: 32 Capping Heads : 8 Cap size : 38mm Type : PET & HDPE Speed output on 1 liter : 180 bottles per minute . Air operated components : FESTO Change Parts : 1-2 Litres Square BW Container systems trolley for change parts. Infeed Conveyor : Available Outfeed Conveyor : Available Cap Blower for elevation of caps in to cap sorter CIP wash Tank : Available for valves CIP Ring : Available CIP wash down in cabin Safety Stop and Emergency Stops on Doors when open. Hight of machine adjustable by Motor. Dawson Polyketting bottle inverter Valves & Pump: Available Fully Guarded by S/S frame with plexi glass doors S/S steps for easy reach control Panel

Manesty ? ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP sy ...

Beer Brewery Two Vessel VELO 15hl/brew, two brews/day, up to 4000hl/annum Complete two vessel beer brew line made by Italian VELO (currently TMCI Padovan) suitable for various beer types from ALEs to LAGER’s, non-alcoholic beers to strong, over 10% Imperial Stouts. Normal brew size has been 1500 liters and during high season, they have brewed 2 brews during 10-hour day. Maximum batch of malt is 600 kg. Without adding sugar beer wort has been from 18.5 to 21 Plato and with sugar added, up to 35 Plato. One complete brew batch with CIP will take about 5-6 hours. In operation, this brewery has overlapped brew batches so that once the first batch of the day has been lautered and spend grain has been unloaded, they started next brew. Maximum weekly brewing capacity with 10 hour working days has been 6 brews (3x3000 liters CCT) due to fermenting tank capacity which leads to theoretical 40 ...

Used premix BC 10000 Lh Technical Overview The used premix BC 10000 Lh is configured as an industrial bottling unit created by BC in 1994 specifically the 10o model This system is admirable given its production capacity of 10 000 L h It is underlined that the machine has been stored in conditions that allow its immediate operation It can take place immediately following installation and proper assembly This used premix is actually located in the north of Italy Operational and Maintenance Details of the Used premix BC 10000 Lh From an operational point of view this used premix is presented disassembled This indicates that the shipment of this machine will be fast It is essential to note that technical manuals are available an element that will significantly contribute to ordinary and extraordinary management and maintenance These documents are indispensable resources to ensure the long te ...

Olsa Process Mixing Suite: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels. Full hydraulic raise/lower complete with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system, exceptional condition. Manuals/drawings included. Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw. Vessel rating 2.5bar plus full vaccum at 155 Degrees C. Jacket 4.5bar 155 degrees C. Full CIP system. 150mm dia hinged chareport with sightglass, vessel light. Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet. Vessel dimensions 1.3m x 2m x 2.4m closed. Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw. Vessel rating 2.5b ...

Terlet soup processing line, consisting of: 3 Terlet double jacketed cooking vessels with agitator and stirrer, fabrication numbers: 1910169 150 001, 1210561 001 001 and 1910169 250 001, year of construction: 2019, product volume: 2500 liter, 230/400 V, 50 Hz, 9.5 kW, weight: 2000 kg, volume inner vessel: 2900 liter, working temperature inner vessel: 0/100 °C, volume jacket 1: 8 liter, working temperature jacket 1: 0/150 °C, working pressure jacket 1: 0/4 BAR G, volume jacket 2: 18 liter, working temperature jacket 1: 0/150 °C, working pressure jacket 1: 0/4 BAR G, volume jacket 1: 8 liter, working temperature jacket 1: 0/150 °C, working pressure jacket 1: 0/4 BAR G, dimensions cooking vessels: (2x) Ø 1650 mm x 3100 mm and (1x) Ø 1650 mm x 3500 mm. Terlet pre-mixing tank on weighing cells, fabrication number: 1210663 001 001, year of construction: 2012, product volume:  ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Cat.-Nr. 13-0176 in a very good condition material: V2A � AISI 304 (1.4301) � surface: outside and inside 2B=IIIC Manufacturer: com. Binder GmbH Upper bottom: - flat conical lid with with CIP-cleaning and connection DN 65 - manhole oval 435 mm x 310 mm with clamping bracket and screw plug - CIP-connector DN 50 - Ventilation connector 200 mm - 1 flanged connector DN 50 - 2 eye hooks Tank body: - thread connector on the side above DN 50 - thread connector on the side above DN 50, 40 cm depth - with overflow pipe inside DN 100 up to the top of the tank bottom - fill pipe installed inside to tank center DN 100 welded from top to bottom - ladder hook 500 mm Lower bottom: central conical bottom outlet pipe DN 50 on 4 stable trumpet feet with calotte height adjustable DxH: 1.720 x 3.700 mm weight: appr. 800 kg All prices are valid Ex-Works, excl.V ...

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

Membrane ultrafiltration XL 300 by B&P Engineering with a maximum efficiency of filtered apple juice of 30 -35 m3/h. Year of production 2007 / Expansion 2018. Very good condition. Technical parameters: 1. Membrane modules Type A19 FPA 20 12", quantity: 120 pcs. (installed on June 2022) 2. The filtration area is 300 m2 3. Capacity: 30 -35 m3/h of apple juice 12 Bx 4. Filtration/washing temperature 50 -55 degrees Celsius. c 5. Maximum working pressure 6 bar Ultrafiltration devices: 1. A block of 120 filter modules mounted on the frame of the device 2. Pump block: INOXPA DIN -FOOD, INOXPA SE26, PACO 3. CIP station: Grundfos dosing system + two capacity tanks. 100 l for  NaCLO, NaOH 4. Clear juice/CIP tank vol. 2.5 m3 5. Tubular heater 6. Control cabinet with a touch panel.

Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:

EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...

Used curd production line from OBRAM Olsztyn. Year of manufacture 2005. Line capacity 1400 kg/h. Packing machine: Multivac R 240 with BIZERBA CWM 6000 checkweigher. 2-track CIP washing station. Line composition: - UFO - Column forming device UF21 - Curd multiforms - 42 nests - Curd presses - 3 pieces - Pressing covers for curd presses - 3 pieces - Multiform swivels - 2 pieces - Multiform emptier - Multiform washer - Multiform magazine for 30 pieces - Multiform transport system - Tray filler - Trays for transporting cottage cheese - Trolleys for transporting trays - Multivac R 240 packaging machine - hard bottom film, soft top film, packaging with the possibility of multiple opening - Automatic constant weight control device BIZERBA CWM 6000 - 2-track CIP station WAB-30/2, OBRAM, 3 tanks with a capacity of 3,000 L

Year of construction: 1980 Running direction: Left – right Pitch: 95 mm Siemens S7 controller, Danfoss frequency converter With a stainless steel control cabinet. Equipped with 3 sets of parts for the following bottles: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP capable. With electric height adjustment. Modernization and service by arrangement. The machine is in good condition and still in operation. A visit is possible by arrangement Year of construction: 1980 Working direction: Left – right Pitch: 95 mm Siemens S7 control and a Danfoss frequency converter. Installed in a stainless steel switch cabinet. Equipped with 3 bottle guiding parts for: 0.5 l NRW, 0.5 l Euro, 0.25 l Ale, 0.33 l Ale & 0.75 l Gastro. Machine is CIP able. Height adjustment of the filler bowl and closing machine by electrical gear motor. Reconditioning /  ...

Used Gea centrifuge model ASE-20. Year of manufacturing 2019. Allowable rated rotational speed of the drum min-1 1200 (FU:60HZ) Allowable feed material density kg/dm3 1 max. Allowable heavy liquid density kg/dm3 1 max. Allowable solid phase density kg/dm3 1.4 max. Allowable throughput m3/h 400/1.5 min./max Allowable feed temperature ºC /95 min./max Allowable housing pressure range bar (g) -/0.04 min./max Drum filling volume l 3.6 approx. Allowable vibration speed mm/s RMS 7 max. Measuring point on the stand Ambient temperature °C 10/45 min./max plate clamping pressure bar (g) 82-112 CIP possible - yes CIP flow rate l/h -/1800 min./max Sound power level dB (A) 80 DIN EN ISO 3746 Sound power level mW 2.94 DIN EN ISO 3746 Lubricating oil quantity l 2.25 approx. Construction type IMV1 Power kW 11 (FU:7.5KW) Voltage V 400 Frequency Hz 50 Type of protection IP55 Inv ...