ci used for sale

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 - 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 135 mm capacity 90 degrees: flat: 280 x 70 mm capacity 90 degrees: square: 120 x 120 mm capacity 45 degrees: flat: 210 x 55 mm capacity 45 degrees: square: 105 x 105 mm turning speeds: max. 3000 U/min saw-blade dia.: 400 x 3,2 x 40 mm motor: 400 Volt total power requirement: 4,0 kW weight: 650 kg range L-W-H: 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 13900 € : 266.88 € : 3.5 mm : 750 mm : 2.2 kW : 6,1 m/min : 2000 mm : 600 mm : 1400 mm : 750 kg : 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4700 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : 45 ° : 45 ° : rund 105 mm / quadratisch : rund 90 mm / quadratisch : rund 90 mm / quadratisch : 1,3 - 1,8 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split vice (clamps before and after the sawblade) Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7500 € : 144.75 € : 2 mm : 700 mm : 1.1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT (PRICE ON REQUEST): pneumatic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 107500 € : 2031.75 € : 360 mm : Ø360 x 40 mm : 40 - 280 U/Min : rund: 20 - 100 mm, quadra : 60 mm : 10 - 9999 mm : 900 mm : 15 kW : 3400 mm : 2675 mm : 2750 mm : 3450 kg : 21,65 kW Mass production in continuous operation is done by BMDO 100 XS when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 100 mm. BMDO 100 XS is designed to be used with TCT circular saw blade in order to cut solid bars in high speedand excellent precise. It is also suitable for HSS blades to cut tubes. With the Standard 800mm stroke servo feeding and 6 meters automatic loader. BMDO 100 XS is perfect for large-scale production of solid bars. STANDARD ACCESSORIES: automtic loader 6 m motorized roller table 3 mMikrospray Coolant Hydraulic Vice Inverter Control Panel Saw Blade Brush Cover Switch Heavy Duty Gear ...

Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves, Additional title: Cleaning system for cleaning pressurised tank cellars, Volume circulation tank: 400 l, Length: 2,5 m, Width: 3,0 m, Height: 2,9 m, Operation / Control: Simatic S7, Material: contact surfaces from stainless steel, Position: on stainless s ...

CIP system with a total of 7 tanks, including: - 1 tank with a capacity of 60 hl as a reserve water tank - 5 tanks, each with a capacity of 30 hl (manufactured in 1992), for acid, reserve water, Desi, and 2 x lye - 1 tank with a capacity of 20 hl (manufactured in 1992) for fresh water Additional system components: - 3 centrifugal pumps - Heat exchanger - Conductivity measurement - Various piping and valves, Additional title: 7-tank CIP system with pumps and heat exchanger, Volume stacked water tank: 6000 l, Volume 5 x tanks for cleaning solutions: 3000 l, Volume fresh water tank: 2000 l, Material: stainless steel, Position: vertical vessels each on 3 feet, Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 3 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 € : 98.43 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : rund 105 mm / quadratisch : rund 90 mm / quadratisch : 4.7 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DISKUS DD 300 So ist eine Doppel-Planschleifmaschine, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Werkstückhöhe max. 80 mm; 2 Schleifköpfe; Schleifscheibe Ø außen 300 mm, Ø innen 233 mm, Breite/Höhe 50 mm; waagrecht; Mitnehmerscheibe Geschw. 29,6–192 mm/s. Technische Daten: Schleifscheibendrehzahl von 1530 t/min bis 24 m/s; Spannung 380 V; Gewicht ca. 2500 kg; Abmessungen L3050×B1400×H1600 mm. Zubehör: Messgerät PRETEC. Erreicht enge Toleranzen; geeignet für präzisionsorientierte Branchen (z. B. Automotive, Werkzeugmaschinen, Luftfahrt, Medizintechnik, Uhrmacher). Technische Daten ohne Gewähr

DISKUS DD 400 II CRM ist eine Doppel-Planschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Werkstückhöhe max. 80 mm; Schleifbreite 40 mm; Schleifscheiben Ø außen 400 mm, Ø innen 250 mm; Breite/Höhe 50 mm. Drehzahlen 135–1435 t/min (Umf. 24 m/s) und links 1150 t/min (3–30 m/s); Vorschub 26–246 mm/s; 380 V; install. Leistung 30 kW; Gewicht ~4200 kg; Maschine 3300×2600×2300 mm; Elektroschrank 1800×400×2000 mm. Zubehör: Kühlmitteleinrichtung, Abrichtvorrichtung, Messgerät IONIC, Werkstücklader, automatische Be-/Entladeeinrichtung, Satz Schleifscheiben, Lampe. Erzielt enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugmaschinenbau, Medizintechnik und Uhrenbranche. Technische Daten ohne Gewähr

WOODSTER ist eine Kreissäge für Holz, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Es liegen keine Angaben zu Arbeitskapazitäten (Sägeblattdurchmesser, Schnitthöhen, Verfahrwege oder maximalen Werkstückdimensionen) vor. Ebenso fehlen detaillierte technische Daten wie Spindeldrehzahlen, Vorschubwerte, Stromversorgung, Abmessungen oder Gewicht. Die Maschine ist darauf ausgelegt, enge Toleranzen zu erreichen, und eignet sich für Tischlerei, Möbelproduktion, Holzverarbeitung und Bau Technische Daten ohne Gewähr

DISKUS DDS 457 II CRA ist eine Doppel-Planschleifmaschine mit 2 gegenüberliegenden Schleifscheiben, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Bearbeitungsbereich: Werkstückdurchmesser 5–60 mm, max. Höhe 1–20 mm; zwei Schleifköpfe doppelseitig (oben, unten). Technische Hauptdaten: Schleifscheiben Ø457×B75 mm, Aufnahmebohrung 76 mm; feste Drehzahl 753 t/min, Umfangsgeschw. 18 m/s; Spannung 380 V; Schleifmotoren 2×15 kW; install. Leistung 33 kW; Gewicht ~5000 kg; Abmessungen L4000×B3000×H2700 mm. Eignet sich für enge Toleranzen in Automobilindustrie, Luftfahrt, Maschinenbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

DISKUS DDS 600 ist eine Doppel-Planschleifmaschine mit 2 gegenüberliegenden Schleifscheiben, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Werkstückdurchmesser 120 mm, max. Werkstückhöhe 50 mm; 2 Schleifköpfe, doppelseitig (oben, unten); Segmentscheibe Außendurchmesser 600 mm, Breite/Höhe 75 x 150 mm. Technische Daten: Schleifscheibendrehzahlen ab 765 t/min (entspricht 24 m/s), Spannung 380 V, Maschinengewicht ca. 6500 kg; Abmessungen L 3410 x B 3370 x H 3100 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automotive, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

REMET TR 70 ist eine Kreissäge, die Präzision, hohe Genauigkeit und Zuverlässigkeit für industrielle Schneidaufgaben bietet. Konkrete Arbeitskapazitäten (Durchmesser, Module, Längen, Verfahrwege, Werkstückmaße) sind in den vorliegenden Informationen nicht angegeben. Genaue technische Daten (Spindeldrehzahlen, Vorschubraten, Stromversorgung, Abmessungen, Gewicht) liegen nicht vor. Entwickelt, um enge Toleranzen zu erreichen; geeignet für Branchen wie Automobil, Luftfahrt, Werkzeugmaschinen, Medizintechnik und Uhrenbau. Technische Daten ohne Gewähr

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8500 € : 164.05 € : 350 mm : 350x32x63 mm : 45 / 80 U/Min : 45 ° : 45 ° : rund 115 mm / quadratisch : rund 110 mm / quadratisch : rund 110 mm / quadratisch : 5.85 kW : 1100 mm : 1000 mm : 1400 mm : 300 kg Semi-automatic circular saw designed High production rates, ideal for small and mid production Heavy duty gearbox Cast iron structure Foot switch actuation Hydro-pneumatic operation of saw head smoothes descent for optimum cut Pneumatic vice 2 cutting speeds Adjustable head stroke according to the dimensions of the material which has to be cut Piece counter 45° right to 45° left cutting saw blade not included OPTION: saw blade Dm. 350 mm € 180,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 280 mm Cutting height: 150 mm Motor output: 2 x 4,0 kW saw blade: 420 x 30 mm Cutting length: 6000 mm speeds: 2800 U/min air pressure: 7 bar weight of the machine ca.: 1750 kg dimensions of the machine ca.: 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic circular saw Type: CM 601 Manufacturer: Adige Year: 2014 Control: Siemens Hours: 14611 Pipe diameter range: 10–102 mm Square profile: up to 70 × 70 mm Aluminum profile: 90 × 90 mm Cut length: up to 800 mm Step feeder 6500 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 5.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Kaltenbach KKS 450 U Metallkreissäge (2021) Hersteller: Kaltenbach Typ: KKS 450 U Baujahr: 2021 Zustand: gebraucht, sehr gut Spannen, Sägen, Rücklauf, Öffnen ? einfach per Knopfdruck Halbautomatische Gehrungskreissäge Arbeitsbereich 150 mm Sägeblatt Ø bis 450 mm Gehrungsverstellung 180° Einstellung der Schnitthöhe über Drucktaster Zwei Schnittgeschwindigkeiten Lieferumfang: ? Dokumentation ? 2m Zufuhrrollenbahn ? 2m Abfuhrrollenbahn mit digitalen Materialanschlag ? 2x Sägeblätter

Behringer Eisele VMS 350 Vertikalkreissäge / Metallkreissäge Hersteller: Behringer Eisele Typ: VMS 350 Zustand: NEU Bearbeitungsquerschnitt max. rund bei 90° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 90° 170 x 100 mm Bearbeitungsquerschnitt max. rund bei 45° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 45° 120 x 100 mm Sägeblattdurchmesser 350 mm Sägeblattbreite 3 mm Bohrungsdurchmesser 40 mm Einstellbare Sägeblattdrehzahl 17 U/min / 34 U/min Maschinenoberteil schwenkbar 45-90-45-30° Motorleistung gesamt 1.4/1.9 kW Breite 900 mm Länge x Breite x Höhe 1050 x 900 x 1900 mm

Circular sawing machine. Raw bitsun, unfortunately no technical data.

Lg.Nr. 26248 Technical data: - For bases / discs up to approx. 4 corner sheet Ø 1200 mm - For bases / discs up to approx. 8 corner sheet Ø 1500 mm - Knife body projection 240 mm - Projection guide bar 900 mm - Max. cutting capacity at 45 Kp/mm² 4.0 mm - Drive speed infinitely variable 6 to 30 m/min - man. Material clamping + man infeed of the knife - Drive 400 V / 3.00 kW - E. footswitch - Space requirement approx. W 2450 x H 1700 x D 950 mm - Weight approx. 1300 kg

saw blade diameter: 315 mm cutting diameter: 100 mm : mm cutting speed: 40 / 80 U/min total power requirement: 1,2 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,8 x 0,6 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 0-46 ° Length of the rolling table: 3200 mm cutting width: 1000 mm Motor output: 5,5 kW Cutting height: 179 mm Cutting height at 45°: 123 mm Saw blade diameter: 500 mm Speed: 3/4/5000 U/min. weight of the machine ca.: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...

Sliding table saw Eima Type 120 Max. Cutting Width: 2068 mm Min. cutting width: 300 mm Maximum blade diameter 400 mm Cutting height ~100mm Motor power 2×4.4kw Electronic Cutting Width Eats Technical documentation and CE certificate Year of manufacture 1999

Carousel rack for carpet and flooring rolls Robust and fully functional carpet paternoster (carousel shelf) from the manufacturer Hubtex, model TRPA. The system is ideal for space-saving, vertical storage and display of carpets, PVC rolls or other heavy roller goods. Master Data & Weights Manufacturer: Hubtex Maschinenbau GmbH (Fulda) Model / Type: TRPA Engine Number: 39080 Maximum load capacity: 2,750 kg Length approx. 5000 mm Permissible unload (imbalance): max. 500 kg Net weight of the system: 1,200 kg Capacity: approx. 14–16 support rods / roller places Electrical connected loads Mains voltage: 380 V 3 N~ + PE 50 Hz Rated power: 0.75 kW Rated current: 2.1 A Degree of protection: IP 44 The carpet and floor coverings for the circulation shelf can be purchased for € 1000 net extra. Item location: Frankfurt am Main Period: The collection m ...

Martin T72A sliding table saw Hydraulic saw tilting with digital display at eye-level Hydraulic saw elevation with digital display at eye-level NC-controlled parallel fence Cross-cut fence with 2-point stops Scoring saw Manufacturer: MARTIN Type: T72A Comfort M-Nr.: V403081 Year: 1999 Control panel: Eye-level integrated in dust extraction cover, LCD displays showing saw height, -saw tilting angle, width/parallel fence positioning; scoring saw positioning Saw blade elevation: Hydraulic footpedal elevation 0 – 170 mm – with LCD display Saw blade tilting: Hydraulic footpedal tilting 0 – 46° – with LCD display Parallel fence Positioning: Handwheel positioning (frontsidemachine) – digital reading on central control Dust cover top: Electrically controlled elevation Manual sideward positioning for large objects sawing Cross-cut table: Aluminium swivelling table suitable for mitre cut ...

Martin T71 sliding table saw Manufacturer: Martin Type: T71 M-Nr.: 1982 Year: V123342 Mainsaw: max. ø450 mm, max Sawheight: 170 mm, Saw tilting: 0° – 46° Scorer: No RPM: 2.800/4.000/5.500 tpm Motor: 5,5 KW Sliding table: 1.900 mm Width: 1.250 mm Cross cutfence: Length measuring fence 2.200 – 3.300 mm with 2 -point system Cross cut table: with fixed positions for most used angles Dustextraction: Top: ø80 mm, Bottom: ø140 mm Weight: 1.200 KG

Martin T17 with tilting saw Manufacturer: Martin Type: T17 M-Nr.: V070521 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Yes Main saw: kW Speed: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø450 Cutting Heigt: 147mm Blade Width: 0 – 45° Cutting Width: 1.050 mm Condition: Volledig functioneel

Rema DMMC sliding table saw Manufacturer: Rema Type: DMMC40 Year M. Nr: 1995 Main saw: max. max. ø400 mm, max Sawheight: 130 mm, Saw tilting: 0° – 45° Scorer: Yes RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.000 mm Parallel fence Positioning: 1.250 mm Cross cut fence: 2.200-3.300 mm 2-point fence Sidetable: with fixed positions for most used angles Dust extraction: Top: ø80 mm, Bottom: ø140 mm Weight: 900 KG

Martin T72A sliding table saw with electric saw elevation, -tilting, NC-controlled parallel fence, cross-cut fence with 2-point stops and mitre cross cut table Manufacturer: MARTIN Type: T72A M-Nr.: V238101 Year: 1997 Control panel: Eye-level integrated in dust extraction cover, electric saw elevation, -saw tilting, NC-controlled parallel fence positioning; Saw blade elevation: Electric controlled – digital reading on central control Saw blade tilting: Electric controlled – digital reading on central control Parallel fence Positioning: NC-controlled with digital reading on central display Sidetable: Mitre cross cut table, Cross cut fence: Aluminium: 2.200 mm, extendable upto 3.300 mm, with Digital 2-point stops Main saw: max. ø450 mm, bookthickness; 0-170 mm, tilting 0° – 46° RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.300 mm Parallel fence Positioning: 1.250 mm Du ...

Altendorf TKR45 Manufacturer: Altendorf Type: TKR45 Mach. Nr: 89-1-221 Year: 1989 saw length: 1350mm Sidetable: JA Saw width: 850mm saw height: 155mm Saw diameter (max): ø450 Saw spindle: ø30 Saw blade tilting: 0-45° Motor: 5,5 kW Speed: 3000/4000/5000 omw/m Weight: 910KG

SCM SI400 Vanguard sliding table saw, 3-ax Control, Swivelling cross-cut table Manufacturer: SCM Type: SI400 Vanguard M-Nr.: Year: 2004 Touchscreen: 12″full-colour touchscreen, start-stop function in sliding table Control: 3-ax control, with control panel at eye -level 999 programm positions, 6 cuts per programm, help function with graphics, collision control Sliding Table: 3.200mm Saw Blades: Ø 250 – 400 mm Main saw: 5,5 kW, 3.000-4.000-5.000 rpm Cutting Heigt: 130 mm (saw diam.. 400 mm-90°, 92 mm- 45°.) Tilting: 0 – 45° Scorer: ø120 mm, 2-ax control Motor: 0.75 KW, 8.500 rpm Cutting Width: 1.500 mm Rip fence: anodised aluminium Cross-cut table: Vanguard cross-cut table with swiveling -50° upto 50° Cross-cut fence: Aluminium 2 digital stops with angular length correction, max 3.2 m

SCM SI15 with tilting saw Manufacturer: SCM Type: SI15F Year: M-Nr.: AB20182 Table Size: 1150 x 800 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 5,5 kW RPM: 3200 – 4500 – 6000 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø350 Cutting Heigt: 115mm Blade tilting: 0 – 45° Cutting width: 850 mm Weight: 560KG

MARTIN T74 Radio Control – sliding table saw, with 4-ax CNC control; parallelogramtable as 5. ax integrated in central control, plus 3-ax Scoring Saw Manufacturer: MARTIN Type: T74 AUTOMATIC – Radio Control Year: 2008 M-Nr.: V484794 YouTube:

Martin T17 with tilting saw Manufacturer: Martin Type: T17 Year: 1972 M-Nr.: V95358 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 4 kW RPM: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm. Saw Blades: ø450 mm Cutting Heigt: 147mm Blade tilting: 0 – 45° Cutting width: 1.050 mm

Martin T60C-automatic panel saw Manufacturer: Martin Type: T60 Classic M-Nr.: V482223 Year: 2008 Martin T60C V482223:

MARTIN T74 Radio Control – sliding table saw, with 4-ax CNC control and 5. ax integrated and 3-ax Scoring Saw Aggregate Manufacturer: MARTIN Type: T74 AUTOMATIC met 3–as voorrits en parallelogram tafel Year: 2007 M-Nr.: V471539 YouTube: Touchscreen: 10.4″ touchsreen full colour, ate eye level, swivelling Table Size: 1.350 x 1.500 mm in grey cast iron; table extension 600400 with storage Table Heigt: 900mm Sliding Table: 3.300mm Main saw: 5.5 kW Saw Blade Arbor: Main saw blade arbor: 30 mm Ø; two 10 mm drive pins Saw Blade replace: ProLock” quick change system Saw Blades: Ø 250 – 500 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades Cutting Heigt: CNC-controlled max. 170 mm when Ø500 mm Blade tilting: CNC-controlled 0 – 46° Cutting Width: CNC-controlled, max. 1.350 mm; can be lowered under table level in i ...

Martin T75PreX (246° tilting) and RadioCompens (length compensation for angular cuts) Manufacturer: Martin Type: T75PreX Year: 2012 M-Nr.: V519664 Control: 10.4″ Touch-Screen at eye-level, turning-swivelling with blocknote holder 3-ax CNC-controlled plus 4th and 5th manual axes integrated in centra control system Table Size: 1.350 x 1.500 mm in grey cast iron; table extension as standard, Table Heigt: 900mm Sliding Table: 3.700mm Main saw: 9.5 kW frequency controlled Saw Blade Arbor: Ø30 mm main saw blade arbor, 2 pcs 10 mm drive pins Saw Blade replace: ProLock” quick change system Saw Blades: Ø 250 – 550 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades Cutting Heigt: 204 mm. Blade Width: -46° tot +46° Cutting Width: 1.350 mm Scoring Blades: 3-ax electric controlled scoring saw aggregate Cross cut table: Para ...

MARTIN T73 AUTOMATIK, Parallelogramtisch, angetriebener Rollwagen, 3-Achs Steuerung Mark: MARTIN Type: T73 AUTOMATIC Baujahr: 2001 M-Nr.: V424244 Tischabmessung: 1.350 x 1500 mm. Tischhöhe: 900mm Besäumtisch: 3.300mm Hauptsäge: kW Sägeblattwelle: ø 30 mm. mit zwei Mitnehmerstifte Sägeblattwechsel: Schnellwechselsystem ProLock” Sägeblatter: Ø 250 – 500 mm; bis Ø 400 mm unter Tisch versenkbar; Schnitthöhe: 170 mm. (Sägeblatter. 500 mm.) Sägeblatteschwenkung: 0 – 46° Schnittbreite: 1.350 mm Parallelanschlag: Anschlaglineal in eloxiertes Aluminium; Endstellung; Automatisch unter Tischebene absenkbar Längenanschlag: Digitaler Längenanschlag aus eloxiertes Aluminium mit Martin 2-Punkt Anschläge Steuerung: NC-Steuerung mit LCD-Anzeige der Breite, Höhe- und SchrägeWinkel, plus 2 digitale Längenanschläge Bildschirm: LCD Bedienpult auf Augenhöhe, wegschwenkbar mit Tablea ...

BSM P450 CE Manufacturer: BSM Type: P450CE M-Nr.: 0904088P450 Year: 2009/04 Cutting height (Max): 135mm Saw diameter (max): ø450 mm Saw blade inner-ø: ø30 mm Saw width (max): 800mm Saw blade tilting: 0-45° Motor: 5,5 kW Weight: 320 kG Including: Table extension rearside

Martin T60C-Automatic panel saw Manufacturer: Martin Type: T60C-AUT M-Nr.: V474295 Year: 2007 Control panel: Eye-level integrated in dust extraction cover 2-ax control + 3rd-ax integrated in central control, but handwheel setting (Saw height, tilting, width) Mainsaw: ø400 mm, bookthickness; 0-130 mm, tilting 0° – 46° RPM: 4.000/4.800/6.000 rpm Motor: 5.5 KW Scoring saw: Yes 3 Ax-controlled Sliding table: 3.300 mm Width: 1.250 mm Side table: steel, galvanised, with angle pre-fix 0º, 22,5º, 30ºen 45º; dimensions: 1.340650 mm Cross cutfence: 2.200 – 3.300 mm with digital reading, 2 flipstops on bearing guided rollers and fine-setting Dustextraction: Top: ø100 mm, bottom: ø120 mm Weight: 1.400 KG Condition: fully functional – in good condition

Martin T60 Classic panel saw Manufacturer: Martin Type: T60C M-Nr.: V447804 Year: 2007 Control panel: Eye-level integrated in dust extraction cover 2-ax control + 3rd-ax integrated in central control, but handwheel setting (Saw height, tilting, width) Mainsaw: ø400 mm, bookthickness; 0-130 mm, tilting 0° – 46° RPM: 4.000/4.800/6.000 rpm Motor: 5.5 KW Sliding table: 3.000 mm Width: 1.250 mm Cross cut table: Steel, galvanized with fixed angle stops 0º, 22,5º, 30ºen 45º; dimensions: 1.340 650 mm Cross cutfence: 2.200 – 3.300 mm with analog tape measurement, flipstop with magnuifying glass Dustextraction: Top: ø100 mm, bottom: ø120 mm Weight: 1.400 KG Condition: fully functional – in good condition

Martin T60C-Automatik Formatkreissäge Marke: Martin Type: T60C-AUT M-Nr.: V477921 Baujahr: 2007 YouTube:

Altendorf F45 ELMO III Panel saw Manufacturer: Altendorf Type: F45 ELMO III Year: 1996 Mach.Nr.: 96-02-044 Technische gegevens: Control: LCD screen, eye level, swing away saw width, saw height, saw tilting, Sliding Table: 3200 mm (Double trolley on hard-chrome rail, smooth upper carriage lock) Cutting Width: 1300 mm Main saw: ø250 – 450 mm, 5.5 KW, 3.000-6.000 rpm NC-electromotive height and swivel adjustment 0-46 °: h Scoring saw: Non Sidetable: extendable 700 mm Length stopper: 0-3.500 mm, with fixed 90 ° position, 2 stoppers Condition: well-maintained machine, functional and technically checked. Avaialable: immediate