ci used for sale

Offer 26003 Technical data: - Saw blade diameter up to 370 mm - Cutting range at 90° around 110 mm - Square 100 mm - Rectangle 280 x 40 mm - or 240 x 85 mm - at 45° around 110 mm - Square 100 mm - Rectangle 220 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 380 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180 x 100 mm saw blade turning speeds: 3000 U/min total power requirement: 2,2 kW weight of the machine ca.: 0,51 t dimensions: 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm cutting diameter: 100 mm saw blade turning speeds: 40 / 80 U/min capacity 90 degrees: square: 90 mm capacity 90 degrees: round: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

380 V 1.5 KW Length 0.6 m Width 0.5 m Height 1.40 m Color: Gray Weight 98 kg Unaudited Hobbyist object

A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.

230 V, 2.0 Kw, 50 Hz, 9.6 A, Extraction connection 2x 40 mm, Saw blade 250 mm, Cutting height 80 mm, Cutting width 250 mm, Cutting length, sliding table 2000 mm, Work table 730x830 mm, Boom table 370x470 mm, Boom with hold-down, extendable 2000 mm, Rip fence with angle adjustment, 45° angle adjustment right/left

Chest grinding machine for HM circular saw blades. Completely overhauled and painted. Suitable for oil and emulsion cooling. Saw blade Ø 150 - 1000 mm, tooth pitch 0 - 120 mm.

Saw blade Ø: 350 mm thereby cutting area Round: 120 mm Square: 100 x 100 mm Rectangle: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Approx. space requirement: 800 x 700 x 1770 mm

Automatic machine for chest and back grinding of carbide-tipped circular saw blades; Refurbished and repainted

Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.

Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:

Pallet circulation system for the production of Twin-Wall Panels and Filigree Floor Slabs comprising: 56 pallets; length = 10.00 m, width = 3.00 m Longitudinal and transverse transport systems for the pallets Stacker crane for storing and retrieving the pallets Curing chamber with 50 storage spaces 1 tilting station at the demoulding station Stacking areas with transfer trolleys Transfer trolleys for horizontal and vertical precast elements Automatic concrete distributor (built in 2018) Turning device for the production of double walls Beckhoff control system 2 laser plotters, from Z-Laser Steel processing PROGRESS: Straightening and cutting system, Progress MSR2/16 with positioning device for the steel of a complete pallet – plotter by Z-Laser Lattice girder cutting system for wall girders Spare parts for electrical/control systems, spare parts for mechanical c ...

PART NUMBER 8006 SPECIFICATIONS - max diameter of the main disc with a scoring scoring rod 350mm - max diameter of the main blade without a scoring rod 450mm - cutting height with the blade in place: 350mm, 100mm - electric adjustment of the main disc up/down + angle - Electric angle display - electric adjustment of the undercut up/down, right/left - spindle diameter 30mm - Spindle locking - with a sliding trolley - cutting length on a trolley 3400mm - cutting width at the guide 1300mm - with sidecar - with an undercutter - max scoring diameter 120mm - spindle diameter 22mm - 0.75kW scoring motor - main motor 5.5kW - 4 types of rotational speed - electronic speed display - Diameter of the extraction port 120mm, 80mm - table top dimensions 1220x730mm - Table top dimensions with widening 1440mm - Table top dimensions with extension 2060mm - shield cover - dim ...

Suitable for automatically grinding chip breaker grooves in HSS, segmented and TCT circular saws. Accessories: Control system for automatic offset of grinding spindle,, coolant system,, stepless adjustable working rate,, machine light., 1 sawblade mount., Circular saw blade diameter: 165 - 630 mm, Tooth pitch: 3 - 50 mm, Saw blade thickness: 2 - 6 mm, Working speed: continuously adjustable from 24 - 50 z/min., Grinding wheel diameter: 25 and 30 mm, Grinding wheel width: 0.3/0.4 and 0.5 mm, Connected load approx.: 0.4 kW (400 V / 50 Hz), Weight approx.: 210 kg, Dimensions W x D x H approx.: 1020 x 900 x 1620 mm, colour: light grey RAL 7047

Dough divider / ciabatta plant ZELAIETA, type: Hydrapate TXA-AUT-ROLL -In very good condition- For making bread with a high percentage of 70 - 90% water, such as classic ciabatta, basto, baguette, rustic bread, rustic bread with pointed ends, mini bread, etc. - Ideal for ciabatta due to gentle dough processing and long resting times - Lamination and lengthening of the dough by up to 60% by rolling out in the satellite head with multi-rollers - Programmable control of up to 16 programs - Flexible shaping through precise cutting into rectangles, squares or diamonds with the guillotine - Automatic settling unit on nets, boards or conveyor belts - Dimensions: 7.0 m length x 1.3m width - El. Connection: 400 V, 2.0 kW Condition: Very good, ready to use Viewing and test run are possible.

Table saw, precision circular saw Manufacturer: Rapid Model; PK-100 Motor: 2.2 KW

KASTO U 10 / Metal circular saw with material support -CE marking -Year of construction 2012 -Cutting area / Round 90 degrees /100x100mm -Cutting area / Flat 90 degrees / 90x90mm -Cutting area / square 90 degrees / 170x90mm -Mitre cutting device -Coolant device -Vise with counter-clamping device for burr-free cutting -Infinitely adjustable saw feed -2x saw cutting speeds -Dimensions circular saw blade 350x2.5x32mm -Saw motor 1.8 KW Dimensions: LxWxH 1.2x0.8x1.9 meters / Weight 500 kg

HAULICK Roll Sheet Shears / Circular Knife Shears -Max. sheet steel: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Cutting blade diameter: approx. 120 – 150 mm - Table size: approx. 500 x 250 mm -Projection / feed range: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: Belt drive -Straight cuts -Strip cutting -Endless cutting of metal sheets -Sheet steel up to approx. 2.5 mm -Aluminium and non-ferrous metals correspondingly stronger Dimensions: LxWxH 0.6x0.9x1.1 meters / Weight 180Kg

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg

cutting capacity: 2,5 mm mm throat: 750 mm round blank diameter max.: ca. 1500 mm weight of the machine ca.: ca. 800 kg includes on set of new replacement tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment.

A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible.

Offer 26163 Technical data approx : - Max. workpiece diameter 80 mm - Projection 70 mm - Welding torch tripod adjustable in X, Y, Z - Tripod method by handwheel 500 mm - Projection tripod 70 mm - Center width 600 mm - Tailstock with pneumatic pressure tip - 3 jaw chuck 100 mm - Handheld remote control - Connection cable - Pneumatic connection - Table base W 2000 x H 850 x D 700 mm - Space requirement approx. W 1150 x H 650 x D 500 mm - Weight approx. 200 kg

CUTTING . TRIMMING SAW machine for solid wood MZ PROJECT LC 4000 second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. Maximum cutting length: mm.4000 motor power: Hp 15 Total weight: kg. 3.000 volts: 380/50

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm Saw blades cannot be swivelled 2 saw motors Motor power approx. 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2000 mm Weight approx. 1300 kg Shipping dimensions approx. 3900 mm x 1300 mm x H 1200 mm

Circular Metal Saw manufactured in 2008. This KASTO KASTOspeed C 9 is designed for sawing steel and non-ferrous metals, featuring a cutting range of round ø15-90 mm or 15x15-80x80. It includes a powerful 11 kW saw unit drive motor, enabling cutting speeds of 50-700 m/min. If you are looking to get high-quality sawing capabilities, consider the KASTO KASTOspeed C 9 machine we have for sale. Contact us for further details.

A universal external and internal cylindrical grinding machine Tachella, refurbished in 2021, is available. Center distance: 600mm, center height: 120mm, max. grinding diameter: 240mm, max. grinding length: 600mm, X/Z travel: 600mm/250mm, max. workpiece weight: 100kg/40kg. Machine dimensions X/Y/Z: approx. 2700mm/1900mm/1700mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical metal clamping - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg - Feeder – roller conveyor with shelf 4000 mm - Discharge – roller conveyor with dimension stop 4000 mm

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 220 x 80 mm feed length: 600 mm feed length: multiple: 1800 mm cutting speed: 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings, Additional title: Cleaning system with 5 vessels, Volume CIP tanks each: 2400 l, Height: 2,6 m, Operation / Control: Proleit Software, Material: vessels from stainless steel, Position: vessels standing on 3 feet each, Base construction: flatconical vessels, Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butterf ...

CIP plant for Seitz combifilter Year of construction: 1990 The manual system consists of caustic tank, heat exchanger and circulation pump., Additional title: Cleaning system with a heated CIP tank, CIP-Tank: 1500 l, Features: CIP tank, tube bundle heat exchanger, pump, piping

upright, insulated stainless steel CIP tank with 6 containers arranged one above the other. The total capacity is 500 hl., Additional title: vertical stainless steel tank, Contents 2 zones each: 10000 l, Content 1 zone: 14000 l, Width: 3000 mm, Height: 12087 mm, Material: stainless steel, Position: free standing, Base construction: 6 cylindrical tanks arranged one above the other with conical bottoms,, Features: ladders and platforms with guard rails, manhole in the covers, shell insulation with welded stainless steel cladding, collecting overflow,

Vertical, insulated stainless steel tank. Most recently used as a CIP tank., Additional title: Vertical stainless steel tank with insulation; built around 2000, Capacity: 7000 l, Width: 2,2 m, Height: 3,1 m, Weight: 800 kg, Material: Stainless steel, Position: Vertical, Base construction: 3 x feet, Features: Side manway; insulation

CIP tank system comprising 3 tanks connected by pipes. The smaller tank is divided into 2 sections., Additional title: 3 rectangular containers with pipe connections, Gross volume insulated containers each appr.: 1300 l, Gross volume additional container appr.: 1000 l divided into two compartments with capacities of approximately 700 and 300 litres respectively, Material: stainless steel, Position: Vertical, Features: 2 x insulated containers + 1 x additional container (divided into two sections)

CIP system comprising three rectangular tanks with piping., Additional title: Cleanig system with 3 rectangular vessels, Capacity 1 x: 1000 l, Capacity 2 x: 2000 l, Length: 3,5 m, Width: 1,5 m, Height: 1,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: rectangular containers, Features: 2 x CIP vessel 20 hl; 1 x CIP vessel 10 hl; level indicator; manway, DN65 connections

CIP tank with 4 separate tanks for water, lye, acid and disinfectant. The system consists of: - 4 tanks with various fittings - Feed and return pumps - 3 diaphragm dosing pumps - Pipework, pneumatic disc valves - Level sensors, in-line conductivity measurement, full and empty level probes, flow monitors., Additional title: Cleaning system with 4 vertical stainless steel vessels, Volume: 1270 l Caustic tank, acid tank, disinfectant tank, Operation / Control: Control cabinet for electrical and pneumatic systems, Bischof CPU, , Material: Tanks made of V4A or V2A stainless steel, Features: 4 x CIP tanks, 3 x diaphragm metering pumps, 3 x pneumatic diaphragm valves, feed pump, return pump, 8 x pneumatic ball valves, 3 x full-level sensors, 3 x empty-level sensors, flow monitors, conductivity measurement, level control, switch cabinet

Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks., Additional title: vertical, conical stainless steel tanks, Capacity: 3000 l/tank, Width: 1,55 m, Height: 3 m, Weight: 600 kg, Material: V4A stainless steel, Position: vertical, standing on feet, Base construction: cylindrical tanks with dished top and conical bottom, Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam

Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main

Used CIP Tetra Pak year 2010 15T/h The Used CIP Tetra Pak year 2010 15T/h, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning process in bottling and food processing plants. Consequently, this system ensures an effective sanitation cycle without requiring production line disassembly, optimizing downtime and reducing water and detergent consumption. Tetra Pak built the Used CIP Tetra Pak year 2010 15T/h in 2010. Specifically, its 15-ton-per-hour operational capacity makes it suitable for high-productivity plants while ensuring hygiene standards that comply with food and beverage industry regulations. Technical Features of the Used CIP Tetra Pak year 2010 15T/h The Tetra Alcip 1 applies a controlled washing cycle to remove organic and inorganic residues from production circuits. In particular, the system integrates separate tanks for water, alkaline detergent, a ...

Used Glass bottling line for ciders 32.000 BPH Technical Specifications & Performance Data Complete glass line rated at 32,000 bottles/hour for crown-capped beverages, configured for 275 ml, 300 ml, 330 ml, 660 ml, 750 ml glass formats. Condition: ready for operation. Scope covers depalletizing through pallet stretch wrapping for cider and ready-to-drink production. This glass bottling line consolidates inspection, rinsing, filling/crowning, labeling, case packing, and pallet logistics into one integrated process. Depalletizer: Kettner Pressant Universal (1N), 5 layers/min Empty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/min Rinsing Machine: CBI JetMatic, 72 heads, 670 bottles/min Filling/Crowning Monoblock: 600–660 bottles/min, 80/14 heads Bottle Inspector 1: Heuft Spectrum TX Bottle Warmer: CBI MCC 2000 Labeling Machine: Krones Topmatic Type 071, 850 bottles/min Bo ...

Used Diversey automatic CIP systemTechnical Specifications & Performance DataThis Clean-In-Place (CIP) system is designed to deliver reliable, repeatable sanitation for beverage production and industrial packaging processes. With three dedicated tanks and fully automatic operation, it streamlines cleaning cycles across process circuits, fillers, pasteurizers, and associated pipelines. The system’s electric heating ensures precise temperature control for effective caustic and rinse phases, supporting consistent hygiene standards on second hand and used bottling line installations.System type: Clean-In-Place (CIP)Year of manufacture: 2012Automation level: Fully automaticHeating method: Electrically heatedPower rating: 15 kWElectrical requirements: 380V / 50 HzNo. of tanks: 3Tank volumes: 2 x 1.0 m³ and 1 x 0.5 m³Total tank capacity: 2.5 m³Application: Beverage production and industria ...

Sliding table saw Martin T 65 Heavy precision sliding table saw 3.5" LCD color screen Motor 5.5 kW Saw blade tiltable 0 - 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Parallelogram transverse stage, for inclination on both sides up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Analogue length stop with 2-point system Trimming length 3,000 mm Cutting width with rip fence 1,100 mm Width stop adjustment via handwheel Reading width stop via control CE version Machine is WORKSHOP overhauled in TOP condition from small business ex location 

Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details.

Key data: 45 °

TECHNICAL DATA: Table dimensions: 1100 x 1100 mm Saw blade: Ø 350 mm Saw blade inclination: 0 – 45° Installed power: 5.5 kW INCLUDED IN DELIVERY: 01 3-roller drive with speed controller

New UHT tubular strilizer, homogenizer, CIP system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142° ...

saw blade diameter: 300 mm cutting diameter: 100 mm saw blade turning speeds: 40 / 80 U/min capacity 90 degrees: square: 90 mm capacity 90 degrees: round: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t Cold circular saw - 45-degree miter cut (one-sided) - Material stop up to 1170 mm - Coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slitting saw CENTAURO SL 3000 Cutting Length 3400mm Cutting width max 600mm Cutting height max 160mm Saw size 550mm Main motor power 11kw Feed speed up to 80m/min Machine dimensions 5285x1532x2150cmH Weight 1500kg Year of manufacture 2001 Net price

ADIGE TT640 circular sawing machine was built in 2009 in Italy by ADIGE S.p.A. The machine enables precise, automatic cutting of a wide range of metal workpieces, such as bars, tubes and profiles. Solid, square and rectangular sections are machined by means of a cutting disc with a maximum diameter of 275 mm. It ensures high repeatability and cutting precision in both unit and series production. The ADIGE TT640 is equipped with a feeder that facilitates the loading of material into the workspace and enables continuous machine operation. The intuitive SIEMENS SIMATIC PANEL HMI control panel enables precise programming and control of process parameters, ensuring user-friendly operation. All this is complemented by an extremely rigid design that maintains high operational stability even during the most intensive use. The ADIGE TT 640 automatic circular sawing machine weighs 1350 kg. T ...

Ref.Nr 00933 see video: Name of the system: circular saw Manufacturer: Eisele Model Vms – II – S Year of construction 1988 Table can be rotated up to 45 degrees Clamping 250 mm width Height min. 150mm height Two speeds Can cut with guide or without guide Condition Technically OK