128,672 used machines on RESALE, but how to find them? Machine Search
Festool Guide Rail ; FS1400/2 Auction-ID: A1-45866-26
Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Equipped with digital control board Auction-ID: A1-45866-1
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg
WEIBERT WJ-K315-A new Sliding table saw The original Weibert sliding table saw should be it! Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!
Key data: 400 mm, 180 mm
Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.
Table saw Altendorf TKR 45 (Ref. No. 183-2712) with spec. Stroke, digital display/operation max. saw blade diameter 450 mm Built in 1990 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm
WEIBERT WJ-K315-A new Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!
for sale MACC Metal Circular Saw NEW 300 E HSS Circular Saw Blade 300 mm Schnittkep. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 150 kg Machine base can also be purchased. Further models and inquiries to FSA Maschinen AG
FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...
Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Pneumatically adjustable angle between 45° and 90° Pneumatic material tensioners Suction Max. saw blade diameter: 500 mm
MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg
saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm
saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
AUTOMATIC DOUBLE MITRE SAW model OMGA TR 2B N oleo second hand machine in Excellent working condition , like new for cutting wood, frames, pvc, aluminium, plastics and various materials CE compliant machine: YES oil pneumatic downstroke of the blade groups alternate or simultaneous blade descent inclination of cutting blade groups + / - 45° bimanual control from the control panel n.02 motors . power Hp 3 each one blades diam. mm. 350 max. useful cutting length mm.2800 min. useful cutting length mm.320 max. useful cutting width 90° mm. 170 x 102 H max. useful cutting width 45° mm. 110 x 102 H volt. 380/50 weigth kgs. 600
GRUNDFOS Vertical centrifugal pump CRN90 X-F-G-E HQQE 3x400V 45kW Model No: B96610310P11431 This pump is only sold by bid. Make a fair offer, then we will agree. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health
Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg
GRUNDFOS Vertical centrifugal pump CRN90 X-F-G-E HQQE 3x400V 45kW Model No: B96610310P11431 This pump is only sold by bid. Make a fair offer, then we will agree. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health
With automatic stop and measuring system type MMS200, length 4750mm
Equipped with coolant pump, On and including pallet
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg
Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg
MACC Metal Circular Saw NEW 315 E HSS Circular Saw Blade 315 mm Section cap. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 170 kg Machine base can be purchased
MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg
Saw blade diameter 350-400 mm, cutting speeds 9-20 m/min, hydraulic flow rate 6 l/min, feed speed 0-1000 mm/min, express return 1800 mm/min
This 3-axis SCHÃCO PDG E CUT was manufactured in 2009. It features a maximum saw blade diameter of 600 mm and operates at a motor speed of 2410 minâ»Â¹. The machine includes a discharge conveyor belt and an extraction system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the SCHÃCO PDG E CUT double mitre saw we have for sale. Contact us for further details.
Circular Metal Saw manufactured in 2013. This SCHÃCO PGS features a maximum saw blade diameter of 400 mm and a motor speed of 2800 minâ»Â¹. It includes essential equipment such as a wireless measuring rod, roller conveyor tracks, a digital control screen, and an integrated extraction unit. If you are looking to get high-quality glazing bead cutting capabilities, consider the SCHÃCO PGS machine we have for sale. Contact us for further details.
MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.
MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds
MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.
Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg
Multi-Blade Saw Costa Leopard S Year: 1981 Cutting height 220mm 2x75hp new conveyor belt, replaced in 2015 Width chain: 370mm Cross conveyor 5 strands
WEIBERT WJ-K315-A Sliding table saw Format sliding table: 3000mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A
RAIMANN KR 310 M ProfiRip Board measurement with automatic saw blade adjustment Optimization for the best possible width distribution Quality division of the boards Workpiece data max. cutting width 310 mm Total passage width 800 mm max. cutting height with blade adjustment without pressure screen 115 mm max. cutting height with multi-blade adjustment without pressure screen 130 mm with pressure screen 115 mm min. cutting height 10 mm min. workpiece length 740 mm Pull-out roller / top pressure roller Locking pressure screen Pneumatic pressure rollers Machine data 2-fold saw blade adjustment 4 x Laser Directional Light Cutting Indicator Control model Proficut with Siemens PC Simatic touch panel Control panel mobile Transport chain with spikes – width 340 mm Automatic chain lubrication with oil level monitoring Diameter saw shaft 65 mm Diameter of socket 80 ...
maximum number of results exceeded
please refine your search
250 € 
