chucks used for sale

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 60/55/H40 mm -Total weight: 0,7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 19 mm -Dimensions: see photo technical drawing -Total dimensions: 70/55/H45 mm -Total weight: 0,9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 55/55/H40 mm -Total weight: 0,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 65/55/H45 mm -Total weight: 0,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 65/55/H45 mm -Total weight: 0,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 55/55/H35 mm -Total weight: 0,4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 60/55/H45 mm -Total weight: 0,9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 65/55/H30 mm -Total weight: 0,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 50/55/H35 mm -Total weight: 0,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 60/75/H60 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece soft jaw set -Width: 20mm -Total dimensions: 84/60/H40 mm -Total weight: 1.1 kg

Description: consisting of: Tappings Saw blades Drill chucks Twist drills in different versions and sizes weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 800 mm

Description: consisting of open-end wrenches, as well as measuring stands and drill chucks weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,560 x 700 x 1,400 mm

Description: two pieces consisting of: Hammers allen keys caliper gauges three jaw chucks Approx. Onsite Dimension. (l x w x h): 3,015 x 745 x 835 mm, weight approx.: 300 kg

Description: consisting of clamping jaws, one height gauge, various steel holders, one SMW three-jaw chuck (diameter: 160 mm), two further RÖHM three-jaw chucks (diameter: 200 mm and 200 mm) and one dividing head with a three-jaw chuck (diameter: 130 mm) Approx. Onsite Dimension. (l x w x h): 800 x 650 x 1,400 mm, weight approx.: 150 kg

Description: consisting of dowel pins in various sizes, clamping elements, various jaws for vices and clamps as well as hand clamps Attention: the jaw chucks on the workshop trolley are not included in the scope of delivery Approx. Onsite Dimension. (l x w x h): 770 x 620 x 1,000 mm, weight approx.: 150 kg

Description: consisting of tips, drill chucks, connections, twist drills, collets, approx. 90 pieces VDI 30 tool holders, partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 750 x 730 x 1,100 mm, weight approx.: 300 kg

Description: Machining range : -X: 4335mm -Y: 1300mm -Z: 180mm -X/Y axis travel speed: 78 m/ min -Z axis linear speed: 25 rpm -Electro spindle 12KW HSK63F liquid cooled -Milling head 2.2kw -Remote control -Bar code reader -VECTOR 'C' AXIS for 360° rotation and positioning of the angular heads with automatic adjustment of the rotation by numerical control -Spindle cooling system with liquid -Independent fixed blade group - for grooving in 'X' direction -Rear tool change magazine with nr. 12 positions -Additional pick up tool magazine 10 positions -Programming and control system on PC WINDOWS Drilling head: -12 independent chucks for vertical drilling in 'X' direction -6 independent spindles for vertical drilling in 'Y' direction -4 spindles for horizontal drilling in 'X' direction -2 spindles for horizontal drilling in 'Y' direction Machine sold without tools or accessories Approx. Onsi ...

Description: X: 4500mm Y: 1300mm Z: 180mm 4 Axes 250m3/h vacuum pump ATS work table with 4 suction trolleys Predisposition for ATS vices and clamps 16 suction cups Horizontal milling head 5 HP ROTARY tool magazine on 16position carriage Rapid ROTARY tool magazine 6 Positions Electrospindle 12 HP HSK63 F Vertical and horizontal drilling block 16 chucks Machine sold wthout tools or accessories Approx. Onsite Dimension. (l x w x h): 7,450 x 4,570 x 3,500 mm, weight approx.: 2,800 kg

Turning diameter: 1500 mm Turning height: 1400 mm Chuck diameter: 0 mm Number of chucks: 1   DORRIES - SD 125 Single Column Vertical LatheMACH-ID 8664 Make: DORRIES Type: SD 125 Control: 1973 Year: 1973 Max. turning Ø: 1500mm Table  Ø:  1250mm Control Heidenhain Horizontal movement support:  1400mm Single column or double column: Single

The machine is in good technical condition, can be tested under power. FANUC O-TC control system Dogmth Maximum turning length: --- mm Spindle passage /max. bar diameter: 14/12 mm Number of spindles: 2 pcs Maximum power of main spindle: 2,2 kW Maximum main spindle speed: 12000 rpm Controlled axes: X; Z; C; Y; Knife plate: 5 tools 12x12 Axis tools: 3 pcs - 20 mm diameter chucks Counter spindle power: 0,4 kW Maximum counter spindle speed: 6000 rpm Lathe length: 1500 mm Lathe width: 980 mm Lathe height: 1560 mm Lathe weight: 1350 kg Accessories: bar feeder FMB for 3m bar oil cooling Technical documentation Functional, trouble-free, still in production. Small, very agile lathe. Including equipment - pliers, bushings, 12x12 knife holders, etc + rotary holder and fixed guide bushings holder.

Manufacturer: ELHA-Maschinenbau Type: CNC 4853 Year of construction: 1998 Hours: 22948 h Diameter rotary table: 1600 mm Pitch rotary table: 4 x 90° KSF size: 900 x 400 mm Clamping stroke per jaw: 40 mm Travel ranges (X,Y,Z,U): 320,225,630,40 mm Feed rate (X,Y,Z): 1-30000 mm/min Feed rate (U): 1-8000 mm/min Face slide diameter: 430 mm Main locker drive power: 22 kw Overall speed range: 5-1500 rpm Number of tool positions: 8 Maximum tool diameter: 120 mm Station 1: Loading and unloading Station 2: 3-axis machining unit with an automatic 8-fold tool changer Station 3: 4-axis machining unit with face slide 0 340 with 40mm stroke and 8-fold tool changer Station 4: 3-axis machining unit with an automatic 8-fold tool changer Accessories: - 4 two-jaw power chucks with swivel device - Coolant system with tank and pump - 6-axis robot from Stäubli - Electrostat ...

Description: Machine number: 511516 Spindle diameter: Main spindle: 42 mm Counter spindle: 42 mm Cross slide 1 - X, Z, (top) Cross slide 2 - X, Z Control: C 200-4 (identical in construction: Siemens SINUMERIK 840 C) INDEX-WHU handling system - CNC programmable Pallet indexing system PST400 (system pallets 400 x 400 mm, see photos) 2 collet chucks - Hainbuch BZI 42 1 three-jaw chuck 1 chip hinge belt conveyor with 2 coolant pumps 8 bar and 18 bar Several pallets for the INDEX PST 400 pallet system Gripper jaws for handling system The scope of delivery includes 1 switch cabinet air conditioning unit Only run with oil Conditionally functional. The following repairs should be carried out: Counter spindle has misalignment. Guide rails and cylinder of the WHU in need of overhaul. Ball screw of the counter spindle was replaced in 2023. weight approx.: 6,500 kg, Approx. Onsit ...

Description: engine power kw 0.75 ( hp 1) maximum working width mm. 420 Chucks n° 1 Spindle rpm 16,500 centre to centre indentations mm. 25-40-50-80 overall dimensions: cm.80 x 72 h= cm.132 weight kg 130 Machine sold without tools or accessories Approx. Onsite Dimension. (l x w x h): 800 x 720 x 1,320 mm, weight approx.: 130 kg

Description: Set of 16 ER32 precision chucks, from 2 to 20 mm, for CNC machines, for engraving and milling, in metal case The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 200 x 200 x 100 mm, weight approx.: 5 kg

Description: Serial number: H-H41129 Operating voltage: 400 V Frequency: 50 Hz Connection: 30 kVA Control system: HURCO WINMAX Travel distances: X: 1060 mm Y: 610 mm Z: 610 mm Spindle speed: 10000 rpm With 24-position tool changer Tool holder: SK 40 Table dimensions: 1270 x 610 mm With 5 grooves With 40-position tool changer Spindle speed: 15000 rpm Attention: the vices and magnetic chucks on the clamping surface are not included in the scope of delivery The machine is equipped with a chip conveyor weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,500 x 2,700 mm

Description: Machine number: H-420468 Operating voltage: 400 V Frequency: 50 Hz Connection: 15.0 kVA Control system: HURCO ULTIMAX Travel distances: X: 1060 mm Y: 610 mm Z: 610 mm Spindle speed: 10000 rpm With 24-position tool changer Tool holder: SK 40 Table dimensions: 1270 x 610 mm With 5 grooves Attention: the vices and magnetic chucks on the clamping surface are not included in the scope of delivery The machine is equipped with a chip conveyor weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,500 x 2,700 mm

Description: Spindle speed: 30 - 2500 rpm Center length: approx. 600 mm Center height above bed: approx. 180 mm Turning diameter over bed: approx. 360 mm Center height above support: approx. 100 mm Turning diameter above support: approx. 200 mm Spindle clearance: approx. 40 mm The machine is equipped with a tailstock, a Multifix steel holder and a collet chuck Incl. 2 additional jaw chucks (diameter: 150 mm and 160 mm) Incl. two-axis digital readout from the manufacturer HEIDENHAIN weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,600 mm

Description: Content consisting of parallel supports, 2 vices (jaw width: 95 mm and 100 mm), cutting dies, twist drills, drill chucks, reamers and other machine tools Approx. Onsite Dimension. (l x w x h): 2,400 x 800 x 1,500 mm, weight approx.: 150 kg

turning diameter:652 mm turning length:2000 mm control:FAGOR 8055i turning diameter over bed slide:455 mm bed width:350 mm spindle taper:A2-8 spindle speeds:30-1700 (3 Stufen) 1/min. spindle bore:80 mm feed stepless:0-5000 mm/min tailstock quill diameter:95 mm tailstock quill stroke:220 mm taper of tailstock quill:5 MK max. length of work piece:2000 mm tool post size:25x25 mm power requirement:7,5 kW coolant pump:0.37 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:3920x1605x2014 mm :8605 DIN repeating accuracy:0,01 mm positioning accuracy:0,01 mm turret:4-fach mit Schaftaufnahme (Hersteller Pragati) CNC controller:FAGOR 8055 automatic stepless gear box:3 Stk. electronic hand wheel:für X- und Z-Achse :in deutscher Sprache coolant system:151 L chip conveyor and trolley:Option steady rests:Option different chucks and faceplates:Option New CNC lathe KRAFT ST 285/1000 w ...

turning diameter:920 mm turning length:2034 mm x-axis:1025 mm y-axis:650 mm z-axis:2106 mm b-axis:240 ° c-axis:360.000 x 0,001 ° w-axis:2032 mm rapid traverse::40 m/min spindle turning speed range:1 - 1600 U/min tool taper:CAPTO C8 work piece power:37 kW speeds of tool:1 - 10000 U/min Spindle bore:170 mm total power requirement:125 kVA dimensions of the machine ca.:8,5 x 3,2 x 3,9 m weight of the machine ca.:26,5 t Machine with MAZAK Matric CNC control - 2 spindle boxes with C-axis and W-axis for right hand spindle - 2 power chucks 650 mm dia. Kitagawa - tool changer for 80 tools - Renishaw probe tester - hand operating panel - milling head with B- and Y axis - spindle changed in 10/21, last service in 12/23 - coolant through spindle - splash housing, chip conveyor

turning diameter:630 mm turning length:2850 mm control:Fanuc 0i-mate MGI swing diameter over slide rest:350 mm bed width:550 mm spindle nose:D11/1:20 spindle bore:104 mm spindle speeds::17-1000 U/min transmission ratio:autom. 4-stufig rapid power traverse in X-and Z direction:4/8 m/min tailstock quill taper MT:5 Morse Quill travel:200 mm diameter of quill:100 mm workpiece accuracy:6-7 ITF x-travel:320 mm z travel:3000 mm chuck size:315 mm dimensions:5200 x 1900 x 1900 mm :6 t power capacity:11 kW CNC controller:FANUC 0i mate TC 3 jaw chuck Ø:315 steady rest:2 Stück frequency control main spindel engine:11 kW turret:8-fach Flat Bed CNC Lathe Flat Bed CNC Lathe, CAK63/80 Series CAK 63/80 series CNC lathes integrate proven structure, stable functionality, and reliable quality to make an economical, practical, universal machine. They are widely used in such industries as automotive, petr ...

max. turning diameter:102 mm turning length:450 mm swing dia.:494 mm bar material dia.:65 mm spindle turning speed - stepless:S1 / S2: 4.000 1/min spindle drive:S1 / S2: 18,6 / 11 kW Turret No.1 stations / rotary tools:10/10 VDI 30 Turret No.2 stations / rotary tools:10/10 VDI 30 Driven Tools:8.000 1/min work piece power:3,7 kW total power requirement:90 kVA weight of the machine ca.:10 t dimensions of the machine ca.:6 x 2,5 x 2, m CNC-turning-center with 2 turrets, 8 axis, 2x 10-pockets turrets with live-tools, C-axis on both spindles, Y-axis +-35mm turret 1, 2pcs. collet-chucks, chipconveyor, barfeeder, tooleye, approx. 60.000h "machine on", approx. 17.500h "spindle on"

swing diameter:260 mm control:840 D SIEMENS turning speeds:3.500 1/min spindle drive:36 / 28 kW chucking diameter:260 mm travel -x axis:900 mm travel -z axis:400 mm turret head:12 Pos. tool holder:VDI 40 rapid power traverse in X-and Z direction:100 / 30 m/min dimensions of the machine ca.:5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm,

turning diameter:670 mm turning length:3000 mm control:840 z-axis:3150/3000 Z+ mm x-axis:700/260 X+ mm b-axis:-110/+90 ° c-axis:0,001 ° main drive motor:60/40 kW spindle turning speed range:2600/3300 U/min spindle diameter in front bearing:160 mm spindle bore:115 mm lower slide:2 x 12, VDI 40 upper slide:25 KW no. of tools in the magazine:90 Stück wotkpiece diameter with 2 vacant positions:200 mm tool length - max.:900 mm tool taper:HSK 100/ VDI 40 rapid traverse::15/20 m/min weight of the machine ca.:35 t total power requirement:140 kW dimensions of the machine ca.:13 x 4,5 x 3,6 m CNC Turninig-Boring-Milling Center with opposed spindles and 2 saddles - SIEMENS 840 C safety integrated control for 8 axis - Left/Right spindle with C-axis, KNCS 400 mm power chucks - Lower saddle with 2 x 12-fold revolving heads - Turning,- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW ...

turning diameter:920 mm turning length:2034 mm control:4 x-axis:1025 mm z-axis:2100 mm b-axis:240 ° c-axis:360.000 x 0,001 ° y-axis:650 mm w-axis:2000 mm spindle drive motor:35 kW spindle turning speed range:1 - 1600 U/min spindle bore:170 mm rapid traverse feeds:40000 mm/min work piece power:37 kW tool taper:CAPTO C 8 toolpiece turning speed range:1 - 10000 U/min total power requirement:125 kVA weight of the machine ca.:26,5 to dimensions of the machine ca.:8,5 x 3,2 x 3,9 m Machine with MATRIX CNC control - Workpiecespindles with W and C-Axis - Milling unit with B and Y axis - 2 power chucks KITAGAWA 650 mm - tool changer for 80 tools - Renishaw probe tester - coolant through spindle - coolant device, chip conveyor

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...

Column drilling machine make ALZMETALL type AB 3 EYear of manufacture 1979Technical specifications:Drilling capacity up to: 32 mmSpindle mount: MK 3Infinitely variable spindle speeds: 65 - 1150 rpm.3 automatic feeds: 0.1 / 0.2 / 0.3 mm / rev.Throat: 280 mmColumn diameter: 150 mmTable size: 350 x 350 mmSpindle stroke: 150 mmDrive power: 2.2 kWPower connection: 380 V / 50 Hzwith- swiveling table- drill chucksused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC lathe make VDF BOEHRINGER type VDF 315 C-UFabr. -No: 1117.7007-26 built in 1989Technical specifications:max. swing diameter: 550/520 mmmax.working lengthways: 450 mmMax.processing lengthways on the drum turret: 280 mmTurning length: 2000 mmSupport path Z: 2227 mmSupport path X: 435 mmSpindle bore: 78/103 mmSpindle mount: DIN 55022/8Infinitely variable speed range: 16 - 2500 rpm.max.torque of the main spindle: 1600/2240 NmFeed speed: 0.1 - 10000 mm / min.Rapid feed: 10 m / min.Feed force: 15 kNNumber of tool stations: 12Switching time: 1 / 1.8 sec.Hydraulic pressure: 60 barDrive power: 43 kWDimensions without chip conveyor approx: 6000 x 2400 x 2400 mmWeight approx: 14.2 twith- three-jaw chuck 400 mm dia.- Drum turret 12 stations of which 6 with driven tools speed 60 - 2500 rpm.- CNC control Siemens Sinumerik 880 T- many tool holders- chip conveyor- Forkhardt power chucksusedPrice on ...