chucks used for sale

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 92/97/H67 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 61/72/H47 mm -Total weight: 0,9 kg/pc.

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 120/130/H85 mm -Total weight: 6,2 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg

Nakamura Take WT 300 MMY. 2 turrets. 2 twin heads. 9-axis controlled turning and milling center. Facing headstock machine. Upper turret with Y axis with +- 60 mm. Lower turret with C-axis driven tools. Both turrets with 12 stations each and all of them motorized. Possibility of setting with 24 tools in each turret. Motor power of both heads 15 Kw. Power of milling motors 5,5 Kw. Speed of both heads 4.000 rpm. Speed of motorized tools 5.000 rpm. Bars loader of 1,5 meters. Interface for any brand and model of loader. Front bucket type parts collector installed in the door. Rear parts collector gantry robot type with 3 Kg. capacity clamp. Cutting power 320 N/M. Distance between heads 980 mm. MQ system for tool clamping. Main spindle bar pitch 70 mm. Size of heads A2-6. Rapid traverse speed 25 m/min in X and Z axes. Indexing time for turret chan ...

Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik SL 1 cycle control Year of construction: 2013 Spindle bore: 66 mm Center width: 1000 mm Circulation O above bed : 435 mm Circulation O over face slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm infinitely variable With the following accessories: Slide protection with interior lighting 4-fold PARAT tool holder 20 PARAT tool holders 3 jaw chucks RÖHM Duro T 200 1 pc Rotating Lynette 0 160 mm Tailstock with extendable drill quill Coolant device Chip drip tray Operating instructions

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Scledum - Berco Crankshaft Grinder RG270 Kurbelwellen Schleifmaschine Ruaro-Scledum RG 270 Crankshaft Grinder Model RG 270 Wheel dimensions Ø x bore x width (mm) Ø 710 hight of the centers 270mm Ø over the bed (mm) 540 Distance between-centers (mm) 1750 Radius height above table 270mm Maximum distance between 1750mm chucks 25-45-70 piece rotation speed rpm Grinding Wheel Head Travel 140mm Grinding Wheel Head Micrometric Travel 170mm Grinding Wheell max. Thickness 70mm Max. Diameter on the steady rests 160mm Grinding Wheel Motor Power 5.6KW Wheight aprox 5400kg Transport dimension approx.540x170x170 Maximum weight Work Piece 250 kg with support Self centering Chuks Left - Right 2x Steady Engines spindel and counter spindles are lifted with air for better movement when assembling crankshafts Table longitudinal movement is hydraulic Splash guards included Hydrauli ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Holex, soft top jaw set 3-piece 315 -Type: 313310-315 -Width: 35 mm -Dimensions: see photo technical. drawing -Dimensions: 145/105 / H55 mm -Total weight: 5.2 kg

MEUSER M II S gap bed engine screw cutting lathe Swing over ways 600 mm Swing over cross slide 400 mm Swing in gap 860 mm Turning length 1500 mm Spindle speed 1200 rpm Steady rest Chucks- 3 pcs Threads metric & English Weight ca. 2500 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: soft top jaw set, 3 pieces -Width: 30mm -Total dimensions: 95/90/H55 mm -Total weight: 2.2 kg

Key data: 430 mm, 744 mm

Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set -Width: 30mm -Bore: Ø 9 mm, distance 38 mm -Total dimensions: 100/90/H50 mm -Total weight: 2.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Type: FWB 315/425 -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 145/110/H62 mm -Total weight: 6.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 160/110/H70 mm -Total weight: 7.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 50mm -Bore: Ø 17 mm -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 180/150/H80 mm -Total weight: 13.3 kg / 13.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 40 mm -Bore: Ø 17 mm -Total dimensions: 140/120/H70 mm -Total weight: 7.0 kg

Hydraulic press brake: AMADA type HFB 170-40, the best model of the best manufacturer of this type of machine. Bending length: 4100 mm; Between columns: 3750 mm Loading: 400 mm, stroke: 180 mm; Pressure: 170 t CNC controlled press Delem DA58, graphics, Polish language. Axes controlled -Y1-Y2-X1-X2-R1-R2 + automatic compensation of table bending . Machine weight 13.5 t. Drives 13 kW. Tools - complete, sectional tools of Amada standard, Amada quick release chucks. Full original DTR, also in Polish, the BiHP workstation manual in Polish.

The machine is in good technical condition, testing possible upon agreement. Lathe with gantry loader. 2 spindles - 6” chucks (165 mm), 2 V12 turrets, 2 workpiece loaders, pick-up stations, 2 Pneumotec workpiece reservoirs, 18 chip ejector positions, OSP-U 100L control system.

Type: LFS 12 - 2SP Parameters: Manufacturer: Okuma Year of production / SO / GO: 2001 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Lathe with gantry loader. Technical parameters: 2 spindles - 8 ”chucks (210 mm), 2 V12 turrets, 2 workpiece loaders, catch stations, 2 Pneumotec workpiece magazines 18 positions, chip ejector, control system OSP-U 100 L. technical datas max turning length [mm] 70 max swing over saddle [mm] 200 max speed [rpm] 6000 rapid feed [m / min] 24/24 (X / Z) max main power [kW] 11 number of tools [piece] 12 + 12 tool clamping system direct recording. length [mm] 2,500 large [mm] 2.084 High [mm] 3.080 weight [kg] 5,000.

Functioning: You just have to put the entire bar, minimum 800 and maximum 7500, it machines it, cuts it automatically and the finished bar comes out, completely finished ready to assemble. Characteristics: 1. Automatic loading system for whole bars 2. Fastening and moving the bar in production to the soundproof booth 3. Drilling and milling with 4 chucks at any 360º degree 4. Electronically variable angle cutting between 22.5º and 157.5º 5. Automatic extractor of the finished profile to the unloading warehouse 6. Printer to label finished profiles Computer with Windows operating system

Mecal MC 305 KOSMOS type TM MMI 4-axis CNC machining center for the processing of aluminum and light iron profiles. Equipped with 5 vices with automatic positioning, 2 angular heads for machining the heads positioned on a special tool changer, 8 tools positioned in the magazine with automatic UT change. Strokes mm X 4500, Y 500, Z 400. Spindle revolutions 18,000 with automatic oil spray lubrication. Year 2015. Used very little, to be seen on site. supplied with 8 chucks + 2 angular heads, see photo.

Dowel drilling machine long hole drilling machine. HOFFMANN Dowel Fix Type: DBL C110 Built in 1995 Dowel drilling on 2 different levels Pneumatic height adjustment of the drilling unit incl. quick-change device for drill chucks. incl. drill chuck up to 20 mm incl. 8-fold gear drill chuck incl. several drill bits. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Power: 1.35kW; Speed range: 230 â€" 3100 rpm; RPMs: 9; Spindle mount: MK-2; Drilling stroke: 85 mm; Spindle projection: 140 - 540 mm; Table size: Table size: 500 x 740 mm / 250 kg loadable; Head tilt: 90 left / 45 right; Column diameter: 80 mm; Quick-release chucks: 1 - 16 mm; Weight: 240 kg; Jet Radial drilling machine JRD 387 A-T - 400 V stable radial drilling machine from the Profi-Line with integrated base cabinet and height-adjustable, swivelling and sliding drill head for the trade radial drilling machine Jet JRD 387 A-T - Profi-Line with machine base and adjustable drill head ProMAC drilling machines with 13 mm to 40 mm drilling capacity ensure steady and precise drilling work with precise positioning and depth control All machines are designed for a long service life and are equipped with a wide range of equipment - for commercial use and maintenance work 5 ...

MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK  ...

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK4 / 40 mm -Dimensions: see photos -Quantity: 12x quick-change chucks available -Price per piece -Dimensions: Ø 72 x 215 mm -Weight: 2.1 kg/pc.

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK3 / 32 mm -Dimensions: see photos -Quantity: 14x quick-change chucks available -Price per piece -Dimensions: Ø 62 x 175 mm -Weight: 1.2 kg/pc.

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece -Total dimensions: Ø 50 x 143 mm -Weight: 0.6 kg

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 3x thread cutting chucks available -Price per piece -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

Description: Magnetic chucks dimensions: approx. 900 x 280 mm Max. Grinding wheel diameter: approx. 250 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 2,580 x 1,500 x 2,000 mm

Description: Consisting of 2 power chucks from the manufacturer FORKARDT (diameter: 250 mm) and various clamping jaws, mainly from the manufacturer SCHUNK weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm

Description: Content consisting of clamping elements and 2 chucks Diameter: 200 mm and 200 mm Approx. Onsite Dimension. (l x w x h): 1,400 x 700 x 2,200 mm, weight approx.: 200 kg

: gebraucht : 1999 : 1676 : prompt, Zwischenverkauf v : Spanien : 10500 € : 1 : 335 mm : 750 mm : 165 mm : 42 mm : 175 mm : 250 mm : DIN55022-5 Nr. 4 : 60-2000 (9) 1/min : 0.05 - 0.75 mm/U : 0.025 - 0.375 mm/U : 0.5 - 7.5 mm : 60 : 245 mm : 120 mm : 48 mm : 3 MK : 140 mm : 2.2 kW : 1900 mm : 850 mm : 1485 mm : 880 kg 3-Jaw chucks Röhm Dm. 300 mm 4-fold steel holder with 4 inserts Chuck protection Cranking length 120 mm Sliding rotary guard with integrated machine lamp Rear chip splashboard Cooling equipment Lead screw and draw screw cover Foot brake User Manual in English COMPLIES WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number: 3201.29 Year of construction: probably 1993 Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Center distance: 1000 mm Longitudinal slide travel: 880 mm Cross slide path: 270 mm Turning length before chuck diameter: 200 mm With hard jaws: 830 mm Turning spindle: Spindle head: DIN55026 size 6 Spindle bore: 62.5 mm Spindle taper: 70 mm Main bearing diameter: 100 Tailstock: Quill stroke: 120 mm Quill diameter: 70 mm Mounting taper: MK 4 Chucks: Largest chuck diameter: 350 mm Largest turning chisel cross-section: 20 x 20 mm Feed drives: Feed force Z-axis: 10000 N Feed force X-axis: 6000 N Z-axis feed rate: 0.001 - 1000 mm/rev Rapid traverse Z-axis: 7 m/min X-axis feed: 0.001 - 1000 mm/rev Rapid traverse X-axis: 5 m/min Thread pitch lengthwise: 0.001 - 1000 mm/rev Speed range: 30 - 3000 rpm Transportation on standard truck Attention: no infor ...

- Table size: 400 x 300 mm - Quill stroke: 180 mm - Drilling capacity: 35 mm - Speed range: 110 - 1450 rpm - Spindle mount: MK3 - Total power: 0.8 kW - Machine weight: 350 kg - Space requirements (W x D x H): 1.2 x 0.9 x 2.0 m - Condition: very good Details runs smoothly, can be used immediately Accessories Vice, 3 chucks

Description: Spindle speeds: 65 - 1146 rpm Center length: 800 mm Center height above bed: 150 mm Turning diameter over bed: approx. 300 mm Center height above support: approx. 100 mm Turning diameter above support: approx. 200 mm Spindle clearance: approx. 46 mm The machine is equipped with a tailstock, a Multifix steel holder and a three-jaw chuck (diameter 120 mm) Incl. various machine accessories such as additional jaw chucks, a quick-release clamp, collets and various spare parts weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 500 x 1,500 mm

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

Boring power: 32.0 mm bore capacity in cast iron: 40.0 mm spindle stroke: 175 mm morse taper: MK 3 Kurzspindel throat: 320 mm column diameter: 130 mm feed: 0.1 - 0.16 - 0.25 mm/U table:: 570 x 475 mm T-slots: 2 x 224 x 14 mm turning speeds: 60 - 1600 U/min threading: M 27 / M 36 total power requirement: 1.1 / 1.8 kW weight: 530 kg range L-W-H: 570 x 960 x 1950 mm Furnishing: - robust & stable machine construction - continuous speed adjustment - Thread cutting device up to M36 - Button for R/L running of the work spindle - extended machine column - Pole-changing drive motor - automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop - Work table height adjustable using hand crank - machined base plate - 3x MK tapping quick-change chucks - separate coolant device - EMERGENCY stop button at the front - User manual (PDF) Machine link: https://mhp.logotech.de/hpm/v7/ ...

OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe  ...

Description: Stainless steel cabinet with 2 machine vices, jaw width 160 mm, 4 lathe jaw chucks, small manual machine vice, SK 40 setting block, collets, clamping material weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 850 mm

Machine Type: Radial Drilling Machine Manufacturer: ARBOGA Model: ER 830 Year of construction: 1975 Condition: good Offer Type: Used Machine Specifications: Drilling diameter: 35 mm Drilling depth: 175 mm Speed range: 80 – 890 rpm. Spindle mount: MK4 Projection: 1060 mm Propulsion: 1.1 / 1.4 kW Remark: automatic feed tapping device, dice table, coolant device, heavy drill vice, 4 machine feet, quick-release chucks, Storage table Weight: 1500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Mazak Integrex 100-II SY 5 axis cnc lathe Double chucks Machine can be seen in working condition Control unit Mazatrol 640 M Swing length 755 mm Turning diameter 470 mm Swing over bed 470 mm X Axis travel 360 mm Y Axis movement 60 mm Z Axis travel 785 mm C-Axis index 0.001 degrees Spindle nose A2-5 spindle speed 6000rpm Engine power 7.5 kW Tool magazine 40 positions

From insolvency: Welding Turntable Manufacturer Unknown 3 jaw chucks 200mm max 65mm clamp Clockwise and counterclockwise rotation Footswitch Swivel 90-45° Speed adjustable by potentiometer Height adjustable from approx. 800-1000mm

Description: Various Haimer, collet chucks type ER -JIS B 6339-2 BT50, for clamping tools with cylindrical shank in ER collets according to ISO 15488 Various Weldon holders with Cool Jet DIN ISO 7388-1 SK40 (formerly DIN 69871) for clamping milling cutters with cylindrical shank and lateral driving surface, similar to DIN 1835-B and DIN 6535-HB. Various BIG KAISER, CK shanks with coolant supply through the center BT50-CKB6-72 Various Kemmler, drill chuck mount SK 50 - B16 DIN 69871 A and various other tool holders, including storage and transport trolleys Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,300 mm, weight approx.: 200 kg

Description: Quick-change insert set without safety slip clutch, 9 pieces, Thread range: M6 - M20, Description: Suitable for, especially with detachable tapping chucks, Note: Inserts with a slipping clutch are supplied with a torque setting for machining steel (Rm 600 - 800 N/mm2). The setting can be adjusted by adjusting the nut. weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 300 x 300 x 100 mm

Description: Serial number: 20625 Travels: X-travel: 1000 mm Y-travel: 500 mm Z-path: 450 mm Control: HEIDENHAIN TNC320 Table clamping surface: 1300 x 500 mm Workpiece weight: 2000 kg Milling spindle (vertical): SK 50 Spindle speeds - infinitely variable: 60 - 3600 rpm Milling spindles (horizontal): Spindle speeds - infinitely variable: 30 - 1800 rpm Drive power of the spindles: 20/25 kW Vertical head manually tiltable: +/-90° Feed rates X/Y/Z - infinitely variable: 10 - 4000 mm/min Rapid traverse: Longitudinal (X-axis): 15000 mm/min Transverse (Y-axis): 15000 mm/min Vertical (Z-axis): 10000 mm/min Projections: Lower edge of vertical spindle to table: 100 - 550 mm Center of vertical spindle to vertical guide: 150 - 600 mm Center of horizontal spindle to table: 0 - 450 mm Center of horizontal spindle to lower edge of headstock housing: 175 mm With various accessories including counter ho ...