chp gas generator used for sale

Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: COMUNA-Metall Year of Manufacture: 2008 Gas type: Category 12HL Connection pressure: 20-50 mbar Nominal power range: 150/195 kW Voltage: 230/400V, 3-phase, 50Hz Fuse: NH 00, 100A Permissible operating pressure: 6 bar Thermal power: 100 kW Electrical power: 50 kW Protection class: IP 54 Permissible operating temperature: 90/70°C Find more here - .ucymachines/ Contact us at - sales@ucymachines

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repairs of engines ...

Manufacturer: MWM Model: TCG 2016 V8 C CHP unit 1 Operating Hours: 22,057 h CHP unit 2 Operating Hours: 9,112 h In addition to the two units themselves, the sale also includes exhaust gas heat exchangers, engine and auxiliary drive control systems, visualization, and a comprehensive spare parts package. Performance Data (Biogas, 50 Hz) - Electrical Output: 400 kWₑ - Voltage / Frequency: 400 V / 50 Hz - Speed: 1500 rpm - Generator: Marelli MJB 355 MB4 - Motor Management System: TEM EVO Efficiency - Electrical Efficiency: 38.0 – 46.4% - Thermal Efficiency: 40.4 – 43.6% - Total Efficiency: Up to 84.4% Engine Configuration - Type: V8 - Bore / Stroke / Displacement: 132 mm / 160 mm / 17.5 liters - Fuel Type: Biogas Heat Recovery (±8%) - Cooling Water Heat: 2080 kW - Mixture Cooler Heat: 5340 kW - Oil Heat: 12000 kW - Exhaust Heat (at cooling): 1136 kW - Radiant Heat (Engine ...

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Hi here sell a Schmitt enertec BHKW which is immediately ready for use and for sale also can be tested Data: Motor you E2876 R6 210 KW generator LEROY SOMER year: 2006 Hours of operation: ca 11000 CHP is until was run very well to expand only expanded because some customers have not finished it to pay bills. If you have questions I am under to you available: Andreas.Peters89@gmx.de

Kuhse control cabinet for CHP incl. breaker 800A

CHP used year 2005 Condition unknown. I did it myself about 5 years ago in unknown condition bought from a dealer, and wanted it the last few years at but finally decided to use a heating oil company. I did not get any information about the condition when buying and can therefore absolutely no Make a statement, but you can see, from the color differences, that already several parts such as .b the cylinder head and the starter were replaced. The price is € 6,000.00 excluding any liability or warranty. For technical data, please refer to the manufacturer's homepage.

Key data: 714 KW, 400 V

CHP natural gas, 2 units Onsite Energy ME3042L3 YOM 2009, Engine: MTU E3042L9, YOM 2016, 23,000h operating hours, Alternator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorption Chiller: Carrier 16LJ-A24E 689KW Cooling Capacity, YOM 2016, Emergency Cooler : Güntner GFH 090.2B/2x2-M 12m chimney, silencers, pumps, actuators, dampers, valves, gas control unite Superior control: synchronization, load management, island operation, grid support; ec Power cabinets, gas control valves, 714KWe, termal 1058KW, 698KW cooling capacity

We are currently offering for sale an almost new 50 kW CHP plant from Tuxhorn. Specifications: - Model: E50SW (Natural Gas Version) - Year of Manufacture : 2022 - Commissioning Date: February 2023 - Operating Hours (BH): 45 - Number of Starts: 59 Special Features: - Equipped with a second exhaust gas SD, reducing exhaust noise to as low as 35 dB(A) for quieter operation. Condition: - Excellent: The unit is in like-new condition with minimal usage. Applications: - Ideal for industrial or commercial operations requiring reliable and efficient combined heat and power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: TEDOM Model: FLEXI 250 Year of Manufacture: 2022 Type of Machine: Combined heat and power plant (CHP) Primary Circuit - Nominal Heat Output: 369 kW - Max. Permissible Pressure: 3.5 bar - Max. Permissible Temperature: 95°C - Category: II - Nominal Size: 100 - Fluid: Water-Ethylene Glycol - Volume: 350 L Secondary Circuit - Nominal Heat Output: 369 kW - Max. Permissible Pressure: 10 bar - Max. Permissible Temperature: 90°C - Category: Article 4, Section 3 - Nominal Size: 80 - Fluid: Water-Propylene Glycol - Volume: 56 L Reversible heat pump Manufacturer: Mitsubishi Model: NX2-N-G06 /A /0606 Type: Reversible, air-cooled heat pump Function: Heating and cooling Power Supply: 400V / 3-phase / 50Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KW Energie Model: Smartblock Year of Manufacture: 2014 Type of Machine: CHP Plant Operating Hours: 17,000 Fuel Type: Natural Gas Engine: Kubota Electrical Output: 22 kW Thermal Output: 50 kW (with condensing boiler use) Fuel Input: 68.4 kW Condition: Fully functional Motor Data - Model: Kubota R24 - Type: Four-Stroke Otto Engine - Cylinder Count: 4 - Displacement: 2.4 Liters - Nominal Speed: 1500 rpm Efficiency Data - Total Efficiency: 105.3% - Electrical Efficiency: 32.2% - Thermal Efficiency: 73.1% - Primary Energy Savings: 34.1% - Primary Energy Factor: 0.36 - Overall Annual Utilization Rate: 105.3% Gas Connection Data - Gas Supply Pressure: 20-50 mbar - Gas Flow Pressure: 16 mbar - Volume Flow (at 0°C, 1013 mbar): 6.8 Nm³/h Temperature Data - Flow Temperature: Max. 85°C - Return Temperature: Max. 65°C - Combustion Air Demand: Min. 75 m³/h - Room A ...

For sale is a fully functional gas-fired CHP plant from MDE Dezentrale Energiesysteme GmbH, type MB 3042 L1, built in 2003. The facility is currently still in ongoing operation (horticulture) and can be visited by appointment. Technical data according to nameplate/control: Electrical power: 345 kW Thermal power: 508 kW Operating hours: only approx. 8,186 h Generator: Leroy-Somer, 440 kVA / 352 kW Voltage: 400V Speed: 1,500 rpm Frequency: 50Hz Control: InteliVision 8 The complete system pictured is being sold, including the engine, generator, control cabinet/control system, soundproof housing and existing heat, exhaust gas and ancillary units. The plant is currently running reliably and is being sold due to an operational change. Price: 39.000 € net VB Viewing and other technical information by arrangement. Dismantling and transport by buyer or ...

Gas CHP Engine: MWM Type: G234V12 AvK Generator 250 kVA 1500 1/min 50 Hz Incl.: control cabinet, gas control system, table cooler, supply and exhaust air. Only ran in test mode, few operating hours! Subject to prior sale - errors possible Internal reference number: E-1206

Manufacturer: COMUNA-Metall Model: 2726-02 Type of Machine : CHP Plant Nominal Heat Load: 156 kW Thermal Output: 92 kW Electrical Output: 50 kW Operating Voltage: 230/400 V, 3-phase, 50 Hz Fuse Rating: NH00, 100A Connection Pressure: 20–80 mbar Max Operating Pressure: 6 bar Operating Temperature: 100/70 °C Protection Class: IP54 Certification: DIN DVGW Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: AVESCO Model: TBG 926-2K Erdgas Year of Manufacture: 2008 Type of Machine : CHP plant with peak load boiler (gas) Power Pth: 1950 kW (connected load WV) Pel: 175 kW Gas Engine: Liebherr TBG 926-2K, S/N 2005 02 7547 Synchronous Generator: Baujahr 2007, HCI 434 C2 250 kVA, S/N D23055s001 Electrical Output: 176 kW el Thermal Output: 260 kW th Operating Hours: Requirements: operation according to 90,000 Bh Weight (approx.): 8,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - .ucymachines/ Contact us at - sales@ucymachines

- Doosan natural gas/biomethane CHP 250 kW -Gas pressure control system - ORCAN Low Temperature ORC 15 kW Net - Heat meters - EEG 2012-8 years remaining term - Installed in concrete sound hood - with workshop room - 800 kVA compact transformer station 20/0.4 kV - Fiber optic connection - Camera system (10 cameras+recorder) - Grounds approx. 500 sqm fenced

Manufacturer: MWM / Caterpillar Model: TCG 2020 V12 K Type of machine: CHP Module Fuel: gas Electrical power: approximately 0.9 MW Thermal performance: approximately 1.1 MW Year of construction: 2014 Generator type: Marelli MJB 450 LB4 Last service: 04/2025 E70 maintenance pending for both modules Module 1 : - Current operating hours: approximately 65,000 hours - Number of starts: 4,384 as of April 2025 - Maintenance E40: 1/2024 at 56,215 hours - Last engine operation: 05-2026 - Condition: basically ready for use and complete, but not in operation due to a defective generator switch Module 2 - Current operating hours: approximately 60,000 hours - Number of starts: 3,911 as of January 2025 - Maintenance E40: 01-2025 at 56,141 hours - Last engine operation: 05-2025 - Condition: basically ready for use and complete, but not in operation due to a defective generator switch Find ...

Gas pressure and heat generator from 2018 with approx. 1,500 operating hours. 9.5 bar, 135 KWth, 1,200 – 1,800 rpm, Compressor: Compair EK 175 NG Manufacturer: Bosch Model: CA 570 NA Type: Gas CHP Pressure and Heat Engine: MAN E0834 E302 Compressor: Compair EK 175 NG Serial Number: 100866970 Output [bar]: 9.5 Power [KWth]: 135 Year of manufacture: 2018 Operating hours: approx. 1,500 Weight unit [kg]: 2,500 Dimensions LxWxH [m]: 3.3 x 1.0 x 1.85

Exhaust gas generator to the cultivation in 16 l of Volvo Penta Industrial engine to the production of stream by use of the flue gas stream

BHKW in container with Cummins diesel engine Lorey Somer generator 250KVA 1500U / min 50 hertz Storm Steuerung, arrangement is equipped with emergency cooler zusaetzl. regularly waited to zeit 21000 company hours. arrangement is operational and available immediately. for other questions I stand to them to verfuegung under 01727265324

Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW

Engine – TBG 616 V 8 K - Approx. 72,500 operating hours - Landfill gas - Engine number 2205942 - Built in 2005 Generator – Marelli M8 B400S4B20 More pictures, information and offers on request. Viewing is possible at any time by appointment. Location: 49811 Lingen / Ems Subject to prior sale

Electrical power: maximum. 55 kW Output heat: at.17-32 kW Voltage: 3 x 400 V Gas connection: Category I2R exhaust gas/curse code B22 Auction-ID: A1-50539-30

Manufacturer: MTU Model: GC370B5 Year of Manufacture: 2015 Operating Hours: O Weight (with/without fluids): 5000 kg / 4700 kg Performance Class: G1 Electrical Specifications: - Electrical Power (COP): 370 kW - Nominal Voltage: 400 V - Nominal Frequency: 50 Hz - Rated Power Factor (cos φ): 0.8 / 0.95 - Max. Outdoor Temperature: 25°C - Max. Installation Height: 100 m a.s.l. Heat Extraction (DIN 6280): - Thermal Output: 401 kW - Admissible Water Temperature (min/max): 70°C / 90°C - Admissible Overpressure in Heating Circuit: 16 bar Table cooler, chimney, everything included. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAN Model: E2848 LER 322 Year of Commissioning: 2015 Power output: approx. 250 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

2 identical water-to-water heat pumps. Manufacturer: Thermo-Tec Type: TT-CHP W/W 170.2-S Heating capacity: 207 kW Refrigerant: R290 - Propane Year: 2024 Can be operated with groundwater/well water or via geothermal probes. Heat pumps can only heat. Commissioning: September 2024 Decommissioning: May 2025 In the meantime, it has been professionally dismantled, stored and immediately available. Subject to prior sale - errors possible Internal reference number: E-1208

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

Gearbox, planetary gearbox for hydraulic motor, axle drive, geared axle drive, wheel drive, double planetary gearbox -Manufacturer: Chiaravalli, planetary gearbox type CHPL 7003 CPC PAM132 B5 -Translation: i: 53.8 -Hollow shaft: Ø 38 x 80 mm -Bolt circle: Ø 265 mm M12 -Number: 3x gearboxes available -Price: per piece -Dimensions: 630/300/H300 mm -Weight: 102 kg/pc.

Description Item #8483 – POUCH FILLING MACHINE FOR DRINKS Manufactured by GUALAPACK Model CHP30, Filling & Capping Machine, currently used for sports drinks, including TECHNO VIBRAZIONI Cap Feeder, Model VD5N, Empty preformed pouches on racks are placed on machine, then they are filled on a rotating board which also caps them. capacity up to around 30 per minute, currently running on 74mms wide x 181mms high (plus cap) pouches.

CHP20H automatic sharpener for H/M circular saw blades.

Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

A complete power plant consisting of 3 JEBANCHER units is now available. Below are the details: 2x Engines Model J616C - Power: 2519 kVA (2.519 MW each) - Overhauled (E60) in 2011 - Operating hours since overhaul: 20,503 hours - Manufacture date: 1997 - Serial numbers: 1200959 / 1200956 1x Engine Model J320 GS S04 - Power: 1366 kVA (1.366 MW) - Overhauled (E60) in 2011 - Operating hours since overhaul: 19,059 hours - Manufacture date: 1997 - Serial number: 1200954 Total power capacity: 2 x 2.519 MW + 1.366 MW = 6.404 MW Scope of supply includes: - XT3 Diane control panel - GEC ALSTHOM transformers: 3 units (2x 2500 kVA, 1x 1600 kVA) - Gas line - Heat exchanger - Smoke exchanger - Pumps - Table cooler (radiators) - Oil tank Location: Paris, France For more information, please feel free to contact us.

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.460 rpm - 14,3 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1444, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.460 rpm - 14,3 A, Estimated capacity: ± 30 m3/h

Kawasaki Gas Turbine Cogeneration Power Plant 34 MW / 60 Hz This modern 34 MW Kawasaki L30A Gas Turbine Power Plant is a highly efficient and environmentally friendly cogeneration facility designed for industrial and utility-scale power generation. Manufactured in 2020 and maintained in excellent condition, the plant combines reliable electrical generation with heat recovery, achieving total fuel utilization efficiency of up to 85.5%. Operation was stopped on Stopped in March 2024 in good condition and the plant was preserved with KHI’s maintenance instructions. The plant is powered by a Kawasaki L30A two-shaft industrial gas turbine featuring a 14-stage axial-flow compressor, advanced Dry Low Emission (DLE) combustion system and high-efficiency turbine technology. The unit delivers approximately 34 MW electrical output with thermal efficiency exceeding 41%, while maintaining exce ...

- Max. nominal thickness 40 mm - Max. recommended thickness 20 mm - Max. bevel length in several runs 18 mm - Max. bevel length in single run 12 mm - MIn. bevel inner diameter 100 mm   - X Bevel - K Bevel - V Bevel - Y Bevel - High average cutters lifespan around 1000 M - Self feed - Zero maintenace

- Max. nominal thickness 40 mm - Max. recommended thickness 20 mm - Max. bevel length in several runs 18 mm - Max. bevel length in single run 12 mm - MIn. bevel inner diameter 100 mm   - X Bevel - K Bevel - V Bevel - Y Bevel - High average cutters lifespan around 1000 M - Self feed - Zero maintenace -  

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1446, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A, Estimated capacity: ± 30 m3/h

DIXI 100 / CHO 2x48 - CHP 9 ist ein horizontales Bearbeitungszentrum für präzise Bearbeitungen mit hoher Genauigkeit und Zuverlässigkeit. Kapazität: Palettenmagazin 7, Werkstückfläche 320x320 mm. Technische Daten: Werkzeugaufnahme ISO 40, Spindel bis 12.000 U/min (stufenlos), Netz 3x380V 50Hz, 4 Achsen, 96 Werkzeugplätze (2x48), 32 Werkzeugkorrekturen. Ausstattung: Kühlmitteleinrichtung, Kühlung durch Spindel, Werkzeugbruchkontrolle, Späneförderer, Spindelkühlung. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1455, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A, Estimated capacity: ± 30 m3/h

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1454, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1456, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1445, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h

Key data: 35 KW

2011 ARROW 35 kWe Arrow VR3-330 Gas CHP Generator Enalco Heat Exchanger Heinzmann Control 35 kWe gas-powered Combined Heat & Power (CHP) generator unit featuring an Arrow Engine Company gas engine, Enalco heat exchanger and Heinzmann engine control system. This used gas generator and CHP unit is suitable for industrial, commercial, agricultural and on-site power generation applications, as well as CHP and cogeneration projects. 35 kWe Gas CHP Generator Specifications Equipment Type: Gas Generator / Combined Heat & Power (CHP) Unit Electrical Output: 35 kWe Fuel Type: Gas Engine Manufacturer: Arrow Engine Company Engine Model: VR3-330 (appears to be; buyer to verify from identification plate) CHP System: ICS / Low Carbon Solutions Year of Manufacture: Approx. 2011 Heat Exchanger: Enalco Heat Exchanger Serial No.: 04167254 Engine Control System: Heinzmann  ...

Key data: 2679 KW, 1500 1/min

2016 Jenbacher 616 Containerised CHP Unit – Natural Gas Generating Set 2.7 MW at 11kV UK Power Generators Ltd is offering is offering a Jenbacher 616 (J616) containerised Combined Heat and Power (CHP) generating set, manufactured in 2016, configured for natural gas operation and built to ISO 8528 standards. This is a complete containerised power and heat generation solution, ideal for industrial facilities, district heating, greenhouses, utilities, and energy centres seeking high-efficiency CHP performance. Technical Specifications of the available unit: Manufacturer: GE Jenbacher GmbH & Co. OG (Austria) Model: Jenbacher 616 Year of Manufacture: 2016 Fuel Type: Natural Gas Rated Electrical Output: 2.7 MW Rated Voltage: 11,000 V Frequency: 50 Hz Rated Power Factor: 1.0 Rated Current: 141 A Performance Class: G2 Max Ambient Temperature (Intake Air): 30°C  ...

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...