128,281 used machines on RESALE, but how to find them? Machine Search
Turntable diameter: 1600mm, load capacity: 1650kg, max. winding height: 2000mm, turning speed: 12rpm. Documentation available. On-site inspection is possible.
Roller conveyor length: 4000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 110 kg length in width: 620 mm length in total: 4000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible.
Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator., container content: 4000 l , Flow rate max: approx. 360 l/min., Filter fineness:: greater than 0.003 mm, Connected load approx.: 9.0 kW (400 V / 50 Hz), Dimensions W x D x H: 6000 x 1200 x 1650 mm, Weight approx.: 2000 kg, colour: light grey
A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible.
An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible.
surface area: 620 300 mm no. of flutes: 6 groove width: 14 mm total power requirement: 0 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.
longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Input voltage (+/-15%): 3 x 400V, output voltage (+/-15%): 3 x 0V-400V, input frequency: 50Hz-60Hz, power: 0kW-200kW, output frequency: 0Hz-200Hz, rated current: 72A. Overload capacity: 1.2: 60A, 42kVA, 30kW, 1.5: 45A, 31kVA, 22kW. Voltage: 265V, frequency: 195Hz, initial voltage: 13.6V, initial frequency: 0Hz. Dimensions X/Y/Z: approx. 2100mm/800mm/500mm. Documentation available. On-site inspection is possible.
longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Path width: 1600mm, processing position: 50mm-1500mm, processing heads: 10x longitudinal scribes, longitudinal scribe line width: 50µm-100µm, laser power per head: under 40W. Laser head L400: wavelength: 10.6µm, output power: 400W, power stability: +/-2%. Machine dimensions X/Y/Z: approx. 3000mm/4500mm/4000mm, weight: approx. 5000kg. Including cooling unit PC 080 and supply cabinet. Retrofitting with 4x cross scoring is possible. Documentation available. On-site inspection is possible.
Two heavy-duty transport trolleys are available. 1) Pefra 4000, year of construction: 2019, load capacity: 3000kg, permissible driving speed: 10km/h, permissible total weight: 4010kg, tare weight: 1010kg. 2) Bauer RGP-1, year of manufacture: 2017, load capacity: 2000kg, insertion width: 700mm, insertion pocket length: 870mm, front dimension: 1540mm, tare weight: 378kg. Documentation available. On-site inspection is possible.
table length: 700 mm table width: 400 mm x-travel: 450 mm y-travel: ? mm total power requirement: 0 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,210,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 400 mm width: 150 mm total power requirement: 24 V weight of the machine ca.: ? t dimensions of the machine ca.: 800 150 180 m Sine table with 24 V electromagnetic plate, swivelling over the longitudinal axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 8 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 - 1600 mm y-travel: 250 - 800 mm z-travel: 350 - 800 mm Control: CNC weight of the machine ca.: 1,6 - 16 t dimensions of the machine ca.: - m MAHO - Package from stock clearance - Special price for sale 4 x milling machine -MAHO MH 400 C - CNC 432 -MAHO MH 700 C - CNC 432 -MAHO MH 800 T - CNC 332 -MAHO MH 1600 S - CNC 432 EXW - Ex works Bensheim / Lorsch Free lorry The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...
: 3000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 12 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 400 mm plate thickness: 4 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.5x1x2.2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
400 m pallet rack STOW, as good as new Features • Colour: Galvanised frame / yellow beam •Ultimate load: o Bay load: 12,000 kg o Shelf load: 2,400 kg per level/evenly distributed load + 145 pcs. frame, height approx. 11000 mm, depth 1100 mm + 1440 pcs beams 2700 mm length, 2400 kg additional load/with evenly distributed load + 2880 pcs of suspension safety devices + 2160 pcs. insert wire mesh 875 x 1115 mm, mesh size 50 x 112 mm, 500 kg load capacity per grid + 580 concrete anchors M12 x 110 mm for fastening Price / 79.900,- € net excl. VAT • Other heights and quantities on request • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at a ...
Number 69 GenSet generator set together with a welding unit Type: MPM 15/400 SS-KA Engine Kubota Power 15 KVA RPM 3000 IP 23 Year of construction 2006 Hz 50 Hours 7440 dB 94 Connection: 32A, 16A Connection below for welding unit 16A Metrics: L: 1.65m H: 1.05m W: 0.85m Weight: 565 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
3 colors stack flexo printing machine. Ideal for aluminium because of the length of the machine Bj 1998 / Upgrade 2023, Working width = 420 mm Print width max = 400 mm, Print width min = 200 mm, Repeat = 330 - 610, Format change infinitely, Speed = 200 m/min, On - unwinder max diameter = 1000 mm, Turnstile but manual change. Tension control with dancer rollers.
Key data: 750 mm, 1524 mm
Control Mazatrol Matrix Max. Rotary Diameter 760 mm Max. turning length 1,524 mm Travel X-axis: 630 mm Y-axis: 230 mm Z-axis: 1,585 mm W-axis: 1,530 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 3,300 rpm C-axis Max. bar passage: 102 mm Sub-spindle Drive power: 26kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 80 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 10 kg Special equipment Cooling by the spindle High pressure pump 70 bar 20 l/min . PLC with 7 pressure levels Chip conveyor MAYFRAN CONSEP 2000 II 70 bar 20 l/min . PLC with 7 pressure levels Interface for bar feeder Automatic Parts Catcher Synchronized Threading ...
Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/min ...
Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: ...
Automatic water filling system for up to 4.000 bottles per hour. Including feeding system for empty bottles to the 18-head rotary rinser. Rotary filling station (12 heads) with gravity filling principle. The capping unit is working with 6 capping heads and is suitable for 28 and 30mm PE standard caps. All product contacting parts are made of SS304 or standard food package plastic. The frame is made of high quality carbon steel Q235 (optional SS304). MITSUBISHI PLC, WEINVIEW Touchscreen. - Specifications: max. speed of the machine in neutral: 66 cycles/minute | number of rinsing heads: 18, number of filling heads: 12, 6 capping heads | bottle volume: 350-2000ml | bottle diameter: 50-90mm | bottle height: 150-310mm | filling tolerance: +/- 2% | compressed air: 0.5m?/6bar | filling water: 1.5m?/h | rinsing water: 0.5m?/h | power: 380V, 3.5kW | machine dimensions: L2700xW1600xH2800mm | weigh ...
Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 400kg/h. - Specification of the lifting crane: max. weight per bag: 1T | max. bulk bag size: L1200xW1200xH1700mm | machine dimensions without side crane: L1740xW1740xH5400mm | - Specification of the vacuum pump: Capacity: max. 400kg/h | power: 380V, 1.5kW | hopper diameter: 290mm | discharge diameter: 213mm | height of vacuum pump: 800mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. ...
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 3000-4000kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 60L/min | power supply: 220V | power consumption: 7.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Specifications Cutting width: 3.8 x 50 mm Year of Make: 1995 Power connection: 400 V/ 4 kW Price: on request Cutting speed: 354 mm/s Safety level: DIN 66399 O-2/P-3/T-3/E-2/ Cutting Type: Particle Cut Working width: 428 mm
pressure: 250 t throat: 400 mm stroke: 30...140 mm table-size: 1000 x 750 mm hole in the table: 360 x 400 mm ram surface: 630 x 500 mm ram adjustment: 110 mm total power requirement: 18 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Alpine pin mill A 400 CW. Mining by the buyer is required. 2 x available
pulling force - max.: 16 t broaching length max.: 1250 mm table width: 400 mm broaching speed: 1...6,4 m/min return speed: 19,5 m/min tool length - max.: 1500 mm total power requirement: 42 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m - Specification: 2- jobs broaching right or left / right and left at the sametime The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 600 mm table width: 380 mm control: FANUC 16i-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1190 mm y-travel: 530 mm z-travel: 540 mm table-size: 1600 x 400 mm spindle drive: 11 kW tool taper: ISO 50 turning speeds: 28-1400 U/min feeds: 16-800 mm/U total power requirement: 21 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 625 mm y-travel: 650 mm z-travel: 650 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible.
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
new
pressure: 400 t distance between columns: 600 mm stroke: 600 mm table-size: 3000 x 1500 mm travel x / y: 2200 x 900 mm working feed: 7 mm/sec tank capacity: 66 l working pressure: 30-250 bar total power requirement: 18,5 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke cont ...
Commonrail pump As good as new with 400 hours
A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.
Dough divider RHEON, type: Twin DIvider 400 VX 202 -completely overhauled- Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Tested starting width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - The machine was dismantled into all its individual parts and wear parts were replaced - Condition: Perfect, like new - Warranty: 6 months Visits and test runs are possible by arrangement.
Mazatrol Matrix Control Travel: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm 2 pallets 400 x 400 mm Milling spindle with increased torque Spindle motor 30 kW Max. spindle speed 18,000 rpm NC rotary table, 360,000 positions Tool changer with 80 stations SK-40 Tool Holder Tool length measurement Preparation of the Renishaw Infrared Measuring System, OMP60 Conveyor 15 bar high pressure pump CE mark
Key data: 45 °, 3 mm, 2 mm
SCM SiI400N Sliding Table Saw Mark SCM Type SI400N M-No.: AB/127843, 071528 Built in 1999 Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3000-4000-5000 tpm. Cutting height 130 mm. (Saw blades. 400 mm.) Saw blade swivel 0 - 45° Scoring ø mm, ID: 20 mm Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Lay-down table: steel Lay-down table with licence for angle cuts Length stop anodized aluminum with 2 flaps Control panel Digitale-analoge zaaghoogte aflezing Condition Fully functional, very SCM maintained
turning diameter: 400 mm swing diameter: 420 mm x-travel: 850 mm z-travel: 315 mm spindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mm turning speeds: max. 4000 U/min tool turret 12 times: C5 Capto rapid traverse x + z axis: 45 / 30 m/min feeding force: 11 kN total power requirement: 58 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cooling equipment - weight: 200kg L 1,700 x W 800 x H 900 cm, High: 2.100 mm, Long: 2.400 mm, Width: 2.400 mm, Weight: 2,500 Kg., Voltage: 380 V, Total power: 4 Kw, Wheel speed: 2,250 / 6,000 rpm, Grinding length: 400 mm, Ø max workpiece: 320 mm, Transversal stroke: 260, Longitudinal stroke: 400 mm, Distance between points: 700 mm, Race car rolling (x axis): 400 mm, Vertical travel of trolley wheel: 280 mm, Specification: Universal
WATER RING HORIZONTAL PELLETIZER, Constructed in a stainless steel sturdy structure, 16.25 kw installed power, for PE PP production average 300-400 kg., steam extraction vent, water-water heat exchanging unit (to be connected to a chiller), N.1 die (customized to project), N.4 rotating knives, N.1 blade-holder, N.1 blade adjusting template, N.1 thermoregulated area, Heating power 6 kW, Cutting drive power 3 kW, No. 1 water pump for water re-circulation, ELECTRIC CABINET (OPTIONAL - can be connected to extruders cabinet), This machine is available in other sizes and in dry version., When submitting your enquiry, please give details of :, - MATERIAL type and size, - CAPACITY required, - if CABINET is needed or possible connection with existing extruder cabinet, installed power - used power in work: about 60-65% : 16.25, capacity: 300-400 kg/h
maximum number of results exceeded
please refine your search
